How to adjust your monitor correctly

We get countless questions asking us how to correctly adjust an LCD. We recommend running the LCD in its native resolution as much as possible. For some games, it is impossible to run non-native resolutions. Text looks inaccurate, images look distorted and colors show up often way off. Microsoft’s ClearType can help you correct the text distortion problems, but of course, we don’t use monitors exclusively for text.

Almost every LCD that we have ever seen has an “Auto Adjustment” button. For most LCDs, this works very well if you have a plain white background or a window that is completely maximized. Other poorer firmwares simply look for colors along the edge of the screen; so if you have a black background, the “Auto” feature will crop your display until all of the corners of something light in color touch the sides. Repeat your Auto Adjustment once or twice to assure the monitor is correct. Typically, this is disabled for DVI connections.

However, for those of you who absolutely need perfect color calibration and luminance, hardware calibration is the way to go. Before we do any monitor reviews at AnandTech, we use a ColorVision Spyder to assure what we are seeing on the screen is what was intended to be seen. These devices are expensive, but if your job depends on accurately producing the right values, there is no other option.

Testing procedures Common LCD problems
Comments Locked

63 Comments

View All Comments

  • spikemike - Thursday, September 4, 2003 - link

    Just got the deal on passive displays from the LCD expert(my dad, he worked at RCA on LCDs just a couple years after they first invented it) and here is what he said
    Passive displays do operate in either twisted or untwisted mode; data is supplied as on or off signal. However because the response time of STN is slow, they get gray scale by pulse width modulation techniques. Usually they get 16 shades of gray (4096 colors) with time modulation, and additonal gray levels by spatial modulation (using 2-4 pixels to achieve
    1-2 bits additonal gray scale). Right now, the best STN color displays achieve 65K colors.

    So basically if they need a gray scale they just turn it on and then turn it off before it gets all the way on. So technically the way it was written was correct. (by the way the last two posts were also mine)
  • Anonymous User - Thursday, September 4, 2003 - link

    "Take a piece of lint free cloth and wrap it around your index finger. Push about 1/4 of an inch above the broken pixel with about as much force as would take to depress a doorbell. Pull your finger down past the pixel to about 1/4 of an inch below the broken pixel. Repeat in a left to right manner as well. If you’ve tried it about 10 times and are still without success, then you most likely are not going to be able to bring that pixel back to life (and you will probably have a light scuff mark on your anti-glare coating as well)."

    >>>are you supposed to press the pixels while it's on? couldn't it cause the neighboring pixels to become stuck in the on position?
  • Anonymous User - Thursday, September 4, 2003 - link

    I have a Cornea Mp704B 17" LCD. It has the 20ms Hyundai Panel. It's very nice, colors look great, sharp text and images, and no trailing or ghosting at all. I did notice that the backlight isn't perfect (just slightly, and i mean slightly, brighter in middle and bottom of LCD than on the top) and I did have 1 dead pixel and 2 dead subpixels (they weren't stuck on red though). I haven't tried rubbing, it sounds a little fisky, but I may eventually. But yeah, the Hitachi panels are nice overall.
  • Anonymous User - Thursday, September 4, 2003 - link

    #25 is right, passive displays are capable of color, every color cell phone today available in the US uses a passive STN display, as far as i know. It is still a much cheaper technology. As does gameboys and palm pilots. Thats why the color seems like pastels and not vivid colors.
  • Anonymous User - Thursday, September 4, 2003 - link

    i think 16 and 17 make a point, #16 almost all monitors use the 18bit color he is right about that. A 6 bit driver is much cheaper then an 8 bit driver. And maybe only a few very high end models use an 8 bit driver. #17 discusses the TV LCDs these in fact are the best LCDs you can buy, they have the widest viewing angles, best color, and the fastest response times, because all people do is watch video on them, Although they tend to be lower dpi so if you are thinking about getting one for a computer monitor be sure to sit far a way or you will be able to see the pixels. Some 60" LCDs shown at SID conferences are the best ever made. They look absolutely amazing.
    A third note is that high res high color displays are a requirement for longhorn. Sharp announced they would be the first to offer longhorn compatible displays. They need high res(UXGA probably) and high color(10bit i believe). These products are still about 2 years off but if you look at displays in laptops they have no problem making high DPI displays, for some reason companies don't think people want a UXGA 17" panels.(they should look at forums like this). There is also a company working on ways to get higher res out of the same number of drivers and subpixels by arranging the pixels differently, (www.clarivoyante.com) this could lead to lower cost for the same resolution potentially allowing the better substrates to be used. There are substrates that use high response time, wide viewing angle technology, its just considerably more expensive.
  • Anonymous User - Thursday, September 4, 2003 - link

    #14
    No I, run my CRt at 85 hz .Well that's as far as my card will go .old card TNT2
  • Anonymous User - Thursday, September 4, 2003 - link

    No.I run it at 85 Hz.Well that's the maximum my card will go .OLd card TNT2.
  • Live - Thursday, September 4, 2003 - link

    Very Good article! Anandtech is really getting back in good shape. I for one would like to read one about CRTs as well. While you’re at it why not cover monitors in your price guides as well what’s the use of all this computer power and fancy graphics cards without a good output of it all?
  • Anonymous User - Thursday, September 4, 2003 - link

    The parts about passive and TFT technology is confusing and perhaps misleading. If you're talking about passive matrix STN or DSTN LCD displays, they were indeed able to turn a pixel partially on, or partially off. However, they're biggest downside was they were always fuzzy because manipulating one pixel, often caused the ones surrounding it to discolour, too. The biggest benefit from TFTs, I believe, was that each individual subpixel was uniquely addressable.
  • Anonymous User - Thursday, September 4, 2003 - link

    samsung still not offering up their 'X' line of 16ms panels for review? Apparently they are available for sale in Europe...

Log in

Don't have an account? Sign up now