Conclusion

If you plan to run DDR400 as your base memory speed with an 800FSB processor, your best memory performance will clearly be with four matched double-sided DIMMs. Our tests, confirmed by Intel White Papers, show these configurations ranked from fastest to slowest performance on an Intel 875 Canterwood or 865 Springledale chipset motherboard.


DDR400 (1:1) Performance DIMM Configuration Single-Channel or Dual-Channel
1 4 DS Dual Channel
2 2 DS or 4 SS Dual Channel
3 2 SS Dual Channel
4 4 SS/DS
Mixed Matched Pairs
Dual Channel
5 Any DS Single Channel
6 Any SS Single Channel

You can run mixed matched pairs of DIMMs. That is, two of one type and size and two of another type and size, but the performance can be significantly lowered. In our tests of mixed pairs, performance decreased 22% to 25% compared to four matched double-sided DIMMs.

If you do plan to use single-sided DIMMs, then make sure you run four matched DIMMs. A pair of single-sided DIMMs ranked third in our performance tests, and was almost as slow as mixed pairs.

The situation changes if you plan to run a 533FSB P4 Processor, or if you intend to run your memory at 333 or 266 Base (5:4 or 3:2 ratio). With a 533 CPU or asynchronous 5:4 or 3:2 memory ratio, the best performing memory configuration is two double-sided DIMMs. Based on Intel White Papers, memory performance with a 533CPU or 5:4/3:2 (333/266) is ranked from best to worst.


DDR333/266 Performance DIMM Configuration Single-Channel or Dual-Channel
1 2 DS or 4 SS Dual Channel
2 2 SS Dual Channel
3 4 DS Dual Channel
4 4 SS/DS
Mixed Matched Pairs
Dual Channel
5 Any 1 or 2 DS or SS
(1 DIMM or 1 in each Channel)
Single Channel
6 Any 1 SS Single Channel


While four DIMMs do not overclock quite as well as two DIMMs on an 875/865 board, we confirmed that the added memory bandwidth more than makes up for the slightly lower overclock with four double-sided DIMMs.

Now that we have determined the best Memory Configurations for 875/865 motherboards, we will look at the best performing high-speed memory in Part 2 of Searching for the Memory Holy Grail. Since we are still waiting for several new releases of DDR466 and DDR500 Memory, it will be several weeks until we can publish a reasonable comparison of the latest in high-speed memory. Stay tuned!
FSB Overclocking with 1, 2, and 4 DIMMs
Comments Locked

42 Comments

View All Comments

  • Anonymous User - Monday, July 28, 2003 - link

    Great article. Pity Im too late. Is single sided RAM the same as single bank (electronic) or physically the ram chips are on a single side of the stick. Mushkin in particular are wary of using the single side term. Also What about PAT acceleration in conjunction with lower latency RAM and DIMM number? Some reviews have shown lower FSB with tight timings RAM and PAT acceleration beating looser timings 1:1 higher FSB RAM systems. Ah questions questions?
  • pakuens - Monday, July 28, 2003 - link

    Good article. I'm right in the middle of buying memory and it answered several questions. It saved me from an expensive mistake, as I was considering using two matched pairs, but of differing size.

    I like the unbuffered benchmark method.

Log in

Don't have an account? Sign up now