Another area where 21:9 displays have shined is in their uniformity. They have had some of the most uniform screens of anything I have tested to date. The LG 34UM95 proves to be a good performer here, but with a couple issues.

As soon as we look at white uniformity we see what the issue is going to be. The upper corners of the display are very dim in comparison to the rest of the screen. If you leave those corners out the rest of the display is very uniform with an all-white screen. The middle 60% of the display is within 3% and even the lower-corners are within 5%. It's those upper corners that are dim that cause a problem with the uniformity.

Black Uniformity is also good except for a bit of brightness in the lower-right corner. The upper corners are darker, which isn’t as much of an issue with black as compared to white. The lower-right corner has a significant rise in black level but very little change in white level. Excluding that point the rest of the display is quite good.

Other than the lower-right corner, the whole display has a contrast ratio of close to 1000:1 with a median of 979:1. The average is dragged down by the lower-right corner as you’d expect but overall the whole screen is good here.

Color Uniformity suffers as a result of the dim corners at the top of the screen. This causes all the color checker samples to miss their target luminance levels and dE2000 errors are higher as a result. As you can see in the center of the screen, uniformity is excellent, but those corners are just not good. The Median color error is only 1.27 but the average falls to 1.65 due to the poor performance in the corners. If you are doing photo work, you can use the center of the screen and be safe, which is basically a 27” display at that point, but avoid the edges due to the light issue.

It is a shame the two upper corners on the LG are so dim. Had they been closer to the rest of the display it would be an excellent performer for uniformity. As it is it only comes in as a very good display. The uniform area is still close to a full 27” QHD display in size, but that is making an excuse for those two corners.

sRGB Test Bench Input Lag, Gaming and Gamut
Comments Locked

110 Comments

View All Comments

  • Samus - Wednesday, June 18, 2014 - link

    So is every other corporate grade monitor. My 24" Dreamcolor Display cost $2000 a few years ago.
  • marcosears - Thursday, October 9, 2014 - link

    I agree. Most people will want to get one of the top monitors at a more reasonable price range. /Marco from http://www.consumertop.com/best-monitor-guide/
  • evilspoons - Wednesday, June 18, 2014 - link

    I don't understand the attraction some people have to 4:3 monitors. Human vision is naturally "widescreen" and looking up and down is much less comfortable than looking left and right. Natural selection 'trained' us to look along the horizon, not up and down. Our retina may be 4:3, but it's not like a single monitor encompasses our entire field of view... now, talk about selecting an LCD panel for a VR display like the Oculus Rift and 4:3 will have my complete support...
  • DanNeely - Wednesday, June 18, 2014 - link

    For anything text related, wider lines are harder to read; so making the screen wider doesn't bring a benefit; but wider screens tend to be shorter meaning that fewer lines of text can be shown at a time.
  • bigboxes - Wednesday, June 18, 2014 - link

    I have a 16:10 monitor, but I don't run MS Word or my browser at full screen. I size the windows ~4:3. I have room to move things around and watch video in widescreen. I think that 21:9 @1440 is great. Two full size windows on one screen instead of two 20" monitors with a bezel between them. It's niche, but not for enthusiasts.
  • TegiriNenashi - Wednesday, June 18, 2014 - link

    "Human vision is naturally "widescreen" "

    That widescreen propaganda is wrong, human vision is close to 4:3:
    http://en.wikipedia.org/wiki/Human_eye#Field_of_vi...
    Short screens are ridiculous waste of pixels on the sides.
  • TegiriNenashi - Wednesday, June 18, 2014 - link

    Here is verbatim quote: "The approximate field of view of an individual human eye is 95° away from the nose, 75° downward, 60° toward the nose, and 60° upward"Let's do arithmetic, shall we? (95+95)/(75+60)=1.4

    Let me put it this way. Humans have 2 (two) eyes. Each eyeball is round. Even if both eyes vision didn't overlap, the maximally wide FOV covered by two eyes would be two adjacent squares. Which makes the aspect ratio to 2:1 max. However, non-overlapping view this is extreme scenario, more applicable to lower species (such as fish).

    To summarize, 2.35:1 is ridiculous invention from previous century. The framing of most scenes in movies is awkward, with actors top of the forehead chopped off. Hollywood should kill it once and for all.
  • Sabresiberian - Wednesday, June 18, 2014 - link

    No, human vision is not "naturally widescreen". It isn't just the retina alone that determines field of view, and normal field of view is 4:3. Also, I don't know why you would have more trouble looking up and down than side to side - I certainly don't.

    Your comment about "natural selection" - you are just making that up. Personally, I'm a big fan of watching where I put my feet, that doesn't involve looking at the horizon. I think that's pretty much normal, but maybe I'm wrong.

    You are confusing societal conditioning with the fundamental man. If you lived in a different kind of society, one that hunted animals in trees, for example, your conditioning would be entirely different, and you wouldn't think "wide-screen" was so "natural" because it would be "natural" for you to look above you as much as to the side. Movies are made wide-screen because of the limitations of seating arrangements for audiences more than anything else. There are scenes in which that view works well - like looking at a horizon with an unobstructed view, say from the deck of a ship or a mountain top, but there are areas where the wide screen utterly fails, as in the experience of walking down a city street between tall buildings.

    Movies largely turn us into floating entities without feet living in a sky-less world. It isn't natural, we are just conditioned to it.
  • Ktracho - Wednesday, June 18, 2014 - link

    I may be betraying my age, but on my 30" 2560x1600 display + 24" 1920x1200 display set up, it is much easier for me to look at the bottom half of the display than the top half, and in fact, I prefer moving my head sideways a greater distance (towards the 24" display) than tilting it up. If it's just for a few seconds then it's not a big deal, but for longer periods of time, my body definitely has a preference.

    Also, I'm not sure field of view is the relevant thing to measure. Even if I were to only use a 24" or a 20" display, I am not trying to see the entire display as a whole, but a specific area at a time, so length:width ratio of the display is not significant. Length:width ratio of the window I am focusing on is far more significant, especially in terms of readability of text. Watching videos full screen or playing games would be a different matter, of course.

    I suspect for my scenario/working habits, a wider display (which allows moving less frequently-used windows off to the side) would be preferable to a taller but narrower display, requiring me to tilt my head more often (or waste real estate), as well as to having a dual-display set up as in my current one.
  • MrSpadge - Thursday, June 19, 2014 - link

    I seconds this, although with "just" one 16:9 or 16:10 monitor. I tend to put things I focus on at about the same height, independnet of how much space is left above and below it.

Log in

Don't have an account? Sign up now