Buyer's Guide: Value Systems - September 2000

Value Professional 3D
Professional 3D users tend to require higher-end components, so once again we got for most bang for the buck, but with a little more flexibility as far as price goes. CPU performance is critical and we need more RAM here than any other system we've looked at previously. The graphics requirements are also very different in the professional space and a large monitor is critical.

Processor – AMD Duron 700 - $120
As we proved in our Duron Review, the 700MHz part performs with the best of them when it comes to professional applications. Whether you're building a cheap programming workstation or a sub $2000 OpenGL powerhouse, the Duron is the perfect solution.

If you feel like overclocking, the Duron's that we've tested have run at 900 - 950 MHz by simply boosting the voltage and changing the clock multiplier. Of course, overclocking AMD's Socket-A CPU's, including the Duron, has been the center of much controversy, but it's quite easy with the right motherboard and the correct information. For full details on overclocking the Duron, read our AMD Thunderbird & Duron Overclocking Revealed Article and the "What to look for in a KT133 Motherboard" section of our Socket-A Motherboard Roundup for August 2000.

For more information on all Duron processors, read our AMD Duron review.

Motherboard – ABIT KT7 - $150
We recently looked at as many Socket-A boards as we could get a hold of and one board stood out head and shoulders above the rest - the ABIT KT7-RAID. While that board is a bit expensive for a value system, ABIT still has a solution for everyone, including the budget-conscious. By dropping the "RAID" part of the product name, and the associated RAID features, the KT7 is available for a much more reasonable $150. As we noted in the roundup, the KT7 is the perfect board to overclock with thanks to its completely jumperless Soft Menu III CPU setup.

Click to Enlarge

The Asus A7V is also an excellent choice that also offers complete overclocking/multiplier control, albeit not in 100% jumperless form.

If you don't plan on overclocking, Gigabyte and Microstar offer solid products that can save you a a bit of money.

Memory – 256MB Nanya or Mushkin Budget PC133 SDRAM (2x128MB DIMM’s) – $280

SDRAM prices are on the way up but at the same time you don't want to sacrifice quality since often times cheap generic SDRAM is the cause of a flaky system.

Mushkin Budget PC133 w/ Nanya chips

Click to Enlarge

While we can't point you in the direction of our usual recommendation of 128MB Corsair PC133 SDRAM due to cost, Mushkin's Budget PC133 SDRAM which we included in our latest PC133 SDRAM Roundup actually makes use of NANYA SDRAM chips which happened to work fairly well as you can see from our roundup.

Since we couldn't find any 256MB modules with the affordable NANYA chips we decided to simply recommend using two 128MB modules. If you think you'll need significantly more memory in the future, consider paying the extra money necessary to get a single 256MB stick.

Video card – NVIDIA GeForce2 MX - $120
This month, we've moved to an NVIDIA GeForce2 MX based card for our value professional system. As far as T&L power goes, the GeForce2 MX provides 30% more T&L power than the original NVIDIA Quadro and is nearly as fast as the GeForce2 GTS or Quadro2 Pro/MXR in applications that are not fillrate limited.

On the overclocking side, the 0.18-micron core of the GeForce2 MX allows for considerable core overclocking, even without a heatsink. However, memory bandwidth is where the bottleneck is, and thus overclocking the memory is the most efficient way to boost the performance of these cards. Read our GeForce2 MX Overclocking Guide for all the details.

GeForce2 MX cards are still just showing up on the market, so we can't recommend any particular model just yet. We've seen prices in the $120 range, with a few vendors dipping as low as $108 on some models. Note that a few GeForce2 MX's are available for even less, but with just 16MB of RAM. With the relatively small price differential, it's simply not worth cutting the memory in half at this point in time.

For more information, see our NVIDIA GeForce2 MX Review.

Monitor – iiYama VisionMaster PRO 450 - $650
Using a Mitsubishi Diamondtron NF, the iiYama VisionMaster Pro 450 provides a perfectly flat display surface using the same technology in Sony’s FD Trinitron models, but at a lower cost.  Make sure you can deal with the damper wires that all Trinitron style tubes have.  The VisionMaster PRO 450 is a 19” monitor and it is highly recommended by us at AnandTech and owners alike.  If you’ve got the funds, we highly recommend you go with the 22” VisionMaster PRO 510 for about $1000.

For more information, read our iiYama VisionMaster PRO 450 and VisionMaster PRO 510 Reviews.