ASUS P5K & P5K3 Deluxe Features

ASUS P5K Deluxe and P5K3 Deluxe
Market Segment: Enthusiast - $229.99~$249.99
CPU Interface: Socket T (Socket 775)
CPU Support: LGA775-based Pentium 4, Celeron D, Pentium D, Pentium EE, Core 2 Duo, Core 2 Extreme
Chipset: Intel P35 MCH and Intel ICH9R
Bus Speeds: Auto, 200 ~ 800 in 1MHz increments
Memory Speed: DDR2 Auto, 200 FSB - 667/800, 266 FSB - 667/800/889/1067
333 FSB - 667/800/833/1000/1067/1111/1333
Memory Speed: DDR3 Auto, 200 FSB - 800, 266 FSB - 800/889/1067
333 FSB - 800/833/1000/1067/1111/1333
PCIe Speeds: 100MHz~150MHz in 1MHz Increments
Core Voltage: Auto, 1.1000V to 1.7000V in 0.0125V increments
CPU Voltage Damper: Auto, Enable, Disabled
Core Voltage Reference: Auto, .63x, .61x, .59x, .57x
CPU Clock Multiplier: Auto, 6x-12x in 1X increments if CPU is unlocked, downwards unlocked, Core 2 Duo
DRAM Voltage: DDR2 Auto, 1.80V ~ 2.55V in various increments
DRAM Voltage: DDR3 Auto, 1.50V ~ 2.20V in various increments
DRAM Timing Control: Auto, 9 DRAM Timing Options
Transaction Booster: Auto, Enable 0/1, Disabled 0/3
NB Voltage: Auto, 1.25V, 1.40V, 1.55V, 1.70V
FSB Voltage: Auto, 1.2V, 1.3V, 1.4V, 1.5V
Memory Slots: Four 240-pin DDR2 DIMM Slots
Dual-Channel Configuration
Regular Unbuffered Memory to 8GB Total
Expansion Slots: 2 - PCIe X16 (1x16, 1x4 electrical for CrossFire or Multi-GPU)
2 - PCIe x1
3 - PCI Slot 2.2
Onboard SATA/RAID: 6 SATA 3Gbps Ports - ICH9R
(RAID 0,1, 10, 5)
2 e-SATA 3Gbps Port - JMicron JMB363
Onboard IDE: 1 ATA133/100/66 Port (2 drives) - JMicron JMB363
Onboard USB 2.0/IEEE-1394: 10 USB 2.0 Ports - 6 I/O Panel - 4 via Headers
2 Firewire 400 Ports by Agere FW322 - 1 I/O Panel, 1 via Header
Onboard LAN: Marvell Gigabit Ethernet 88E8056 - PCI Express Gigabit Ethernet controller
Realtek RTL8187 PCI Gigabit Ethernet controller
Onboard Audio: ADI 1988B - 8-channel HD audio codec
Power Connectors: ATX 24-pin, 8-pin EATX 12V
I/O Panel: 1 x PS/2 Keyboard
1 x WiFi Port
2 x e-SATA
1 x S/PDIF Coaxial/Optical - Out
1 x IEEE 1394a
1 x Audio Panel
2 x RJ45
6 x USB 2.0/1.1
BIOS Revision: v.0304
Board Revision: v1.00

ASUS has loaded down this board with a wide array of options that includes their WiFi-AP Solo wireless network solution, dual Gigabit LAN, ADI AD1988B HD audio codec with improved circuitry, and the complete AI Lifestyle suite. The BIOS is fairly comprehensive and is enthusiast oriented. The two most important features we used during testing are the Transaction Booster option that on average improved unbuffered memory scores and latency by 4%~7% along with the CPU Voltage Damper setting that greatly reduced Vcore droop. We noticed under load testing with our QX6700 that average Vcore droop was around .04V and with CPU Voltage Damper enabled the average VCore droop hovered around .02V.

ASUS P5K Deluxe Layout and Features
Click to enlarge

ASUS did a really nice job in the layout of this board as all features on the board except for the clear CMOS jumper are easily reached. This board features an eight-phase power regulation system and 100% use of conductive polymer aluminum capacitors that provided excellent stability during testing at stock and overclocked speeds. During our overclocking tests we found the passive heatpipe system worked well but additional airflow was required to ensure stability during overclock testing.

The board installed easily into our Cooler Master CM Stacker 830 case and cable management was very good for power, optical, and hard drives. Our only concern was that two out of six SATA connectors were partially blocked when installing an 8800 GTX. The ports could still be used with an angled SATA connector, but it seems only standard SATA cables are included in the packaging. Our larger heat sinks did fit on this board, but there was not much space left around the CPU area after installation. We will go in depth about the board and its features in our P35 roundup before Computex.

ASUS P5K3 Deluxe Layout and Features
Click to enlarge

The P5K3 Deluxe is based on the same board design as the P5K but includes a wrap around heatpipe system that provided a slight benefit during overclock testing provided airflow was adequate. We saw an average temperature reduction of about 2C when measuring the MCH under load when compared to the P5K board. However, the drawback is that installation of a large heatsink is cumbersome with this design. Our current inventory of heat sinks worked but be prepared for some minor cuts when installing them. Of course, the real news about this board is support for DDR3 memory and some interesting test results as we will see shortly.

X38 and G35 Chipsets - 3rd Quarter Gigabyte GA-P35-DQ6 Basic Features
Comments Locked

58 Comments

View All Comments

  • drewintheav - Sunday, May 27, 2007 - link

    When you tested the P5K Deluxe Wifi mainboard and OCZ Reaper 9200 ddr2 memory were you able to boot up with with both modules of the reaper memory installed or did you have to boot up with a different memory and then adjust the ddr2 voltage to 2.3?

    I can not boot with all settings on the Asus P5K Deluxe Wifi set to default. The motherboard starts up but the screen stays black and there is no beep or POST information displayed.

    Were you able to boot up no problem? I was able to boot no problem at default settings on my Asus Commando with the same OCZ Reaper 9200. Do you think I need to replace my motherboard? I also have had the pc spontaneously restart twice now.

    Thanks in advance for any info or suggestions that you can provide.
  • Stele - Tuesday, May 22, 2007 - link

    Most sites seem to list Asus's high-end boards as having 8-phase power, as per the spec sheet provided by Asus. However, I've a funny feeling that it might not be so, despite the number of MOSFET "sets" and inductors. When I was working on P5B Deluxe boards, which also supposedly sports 8-phase power, I noticed that they used the Analog Devices ADP3198 synchronous buck controller. This controller supports up to 4 phases max, which suggests that the 8 apparent phases are actually arranged in two sets of 4-phase circuitry running in parallel. If this is true, it's an unfortunate bit of misleading marketing, though it was probably due to the pressure in keeping up with gimmicky competitors touting quantity (6-phase, 12-phase, xx-phase) over quality (component/circuitry design/implementation).

    The presence of a 'voltage damper' setting in BIOS for the P5Ks seem to hint at the possibility of something new, however: either the presence a new PWM controller or some additional droop compensation circuitry. I'm guessing it's still an ADP3198, and hence the latter scenario. Would it be possible to find out what controller's being used on the P5K, pretty please? :P

    IMHO, while the Analog PWM controllers have generally been stellar performers in their own right, they ought to start improving their products so that manufacturers would have to worry less about breaking relationships with them and jump ship - especially with, for example, Intersil having excellent analog (up to 6 phases) and digital PWM controllers.
  • Stele - Wednesday, May 23, 2007 - link

    Now that I recall, Gigabyte too is in the habit of being rather liberal with how they count phases... in fact they're arguably one of the first to do so, along with their DPS gimmick in the 875 days. The DQ6 is listed and marketed has having 12 phases, but if I remember correctly, Gigabyte uses an Intersil ISL6327 for their 12-phase products (at least the GA-965P-DQ6 did so). This is a 6-phase controller, which means that, as in the case of the Asus designs mentioned above, the "12-phase" power claimed by Gigabyte is little more than two sets of 6 phases in parallel. Is this still the case in the P35-DQ6?

    If so, it'd be good to point out the reality under misleading hype, so that if nothing else, readers and potential buyers are better informed - and to underscore the fact that there are hardware sites who do know their stuff and who don't simply swallow and parrot whatever the manufacturers throw at them.

    Just my 2 cents'!
  • shabby - Monday, May 21, 2007 - link

    The loop-de-loop kicks ass on the msi board :D
  • TA152H - Monday, May 21, 2007 - link

    I agree, I don't know why, but I need it!
  • Gary Key - Tuesday, May 22, 2007 - link

    It actually works also, a lot less aluminum than the Gigabyte and ASUS solutions, yet the MCH/PWM area seemed to be within 1C of the other boards in our early testing with the Quad. Still not a big fan of the "designs" coming out but to each his own. I think the new abit P35 board as the best looking heatpipe system but then I like it old school... :)
  • TA152H - Wednesday, May 23, 2007 - link

    I don't like you any more. I'm just not sure I can relate to someone that didn't like that rollercoaster :P .

    I expect it probably should work pretty well. With windmills, one of the biggest considerations for the power it produces is how tall the tower is; the further from the Earth, the more wind energy it will get. So, by extension, by creating this roller coast they elevate it to a higher point, and of course by convection the hottest air will hit that spot. So, it should work out pretty well (by now you're probably scratching your head thinking "what is this idiot talking about". It's because I have no clue, but I want it, and I'm making stuff up to validate the decision like this windmill nonsense).

    Old school heat pipe systems? Hmmmm, I don't remember even seeing a heatsink on anything earlier than a 486 processor, so I just think we can categorize your heatsink taste, at best as prosaic, and maybe even boring! I think this roller coaster only portends of things to come, I expect bigger ones soon, as well a hot dog stand. Motherboards seem to have become amusement parks, we have carousels (spinning fans), water equipment, towers, and now a roller coaster. Good grief.
  • yyrkoon - Thursday, May 24, 2007 - link

    Oh, and . . . .

    http://www2.abit.com.tw/page/en/motherboard/mother...">http://www2.abit.com.tw/page/en/motherb...pMODEL_N...
  • yyrkoon - Thursday, May 24, 2007 - link

    I agree with Gary, these 'windmill' and butt ugly other heatpipes from other OEMs can not touch ABITs OTES in looks. I guess that is what hapens when you pioneer a technology, and everyone copies . . .
  • Stele - Monday, May 21, 2007 - link

    quote:

    Compared to P965 the ICH9 extends SATA to a total of six native SATA ports, expands USB 2.0 to twelve ports, and adds an eSATA port with port multiplier and port disable

    While the addition of 2 more USB 2.0 ports is certainly one of ICH9's new features, doesn't ICH8 already offer 6 SATA ports? That was one of the latter's welcome improvements over the ICH7.

    There also doesn't seem to be anything in the block diagrams that indicate the presence of an eSATA port. I'm guessing here, but could it be that the mention of a "port multiplier" led to some confusion? After all, the 6 SATA ports in ICH8 and 9 are actually controlled by two host controllers, with internal port multipliers that connect them to 4 and 2 ports respectively (that's why, for example, some board manufacturers label two of the SATA ports as 'secondary' and state that it is generally not advisable to connect the boot drive to them).

    However, I'm guessing that the port multiplier issue came up in the context of ICH9 because apparently Intel would be using only command-based switching in ICH9's port multipliers, removing FIS (Frame Information Structure)-based switching apparently used in ICH8 (most port multipliers use both command-based and FIS-based). While FIS-based switching offers higher performance under multiple-drive loads than command-based switching, FIS-based switching is more complex and hence expensive to implement; besides that, it uses slightly more CPU resources to manage the increased command and data flow rate. As such, Intel might have chosen to use the simpler, cheaper command-based switching for ICH9. If this is true, it might be to keep costs down and because many hardware sites probably over-emphasised on CPU-utilisation when comparing SATA performance with other chipsets. Argh. Again, this was something that came up on the grapevine but I've not been able to find official sources that verify or deny this... perhaps Anandtech could shed some light?

    In the event that it's true, exactly how much performance would suffer under multiple-drive read/write loads is unclear, and this is where an extensive non-RAID and RAID performance test with perhaps a full six drives (or even 3/4/5) might give some hint. On the other hand, it may be that performance would not differ much in scenarios short of an array larger than a two-drive RAID 0/1 (as demonstrated in this review), so Intel decided to dispense with what they may consider a needless luxury.

Log in

Don't have an account? Sign up now