Gaming Buyer's Guide - November 2004
by Jarred Walton on November 21, 2004 5:54 PM EST- Posted in
- Guides
Additional Components
The remaining components will not have as much of an impact on performance, but they are still important. A cheap display, for example, will limit your maximum resolution in games. The low-end power supplies that come with many cases can cause instabilities that are difficult to track down. Your hard drive might also run out of space if you find yourself installing numerous games at the same time, ripping CDs to MP3 format, and/or storing movies on your system. Here, then, are the remaining components, in no particular order.Hard Drives | ||
Target Segment | Component | Price |
Budget | Seagate Barracuda 80GB EIDE model 7200.7 (PATA Hard Drives) | 59 |
Mid-Range | Seagate 160GB SATA 7200RPM 8MB Model ST3160023AS (SATA Hard Drives) | 93 |
High-End | Western Digital Raptor 74GB SATA 10000RPM 8MB Model WD740GD | 173 |
High-End | Maxtor 300GB SATA 7200RPM 16MB Model 6B300S0 | 207 |
The two major factors in the hard drive segment are capacity and performance. We recommend 80 GB 7200 RPM models with 8 MB of cache as the bare minimum for any hard drive, as getting less than this can noticeably affect performance while saving only $10 or $15. With the more expensive models, you get increased capacity, except with the Raptors, which instead go for faster access times and sustained transfer rates. RAID 0 is also an option for increasing transfer rates, but our testing has shown that you are not likely to notice the difference in many tasks.
Optical Drives | ||
Target Segment | Component | Price |
Budget | Lite-On 16X DVD-ROM Model SOHD-167T | 30 |
Mid-Range | NEC DVD+/-RW Drive Model 3500A (DVDR Drives) | 72 |
We have only listed two optical drives, a 16X burner and the other, a 16X DVD-ROM. 8X and 12X DVDR drives are also sufficient and can save you a bit of money. We suggest that anyone building a system should add in a DVDR these days, as they are very handy for doing large backups of critical data. If you're sure that you don't need the capability to burn CDs and DVDs, we prefer DVD-ROM drives. They only cost $10 more than CD-ROM drives and we are starting to see more games shipping on DVDs. It is much more convenient to install from a single DVD than from multiple CDs.
Cases and Power Supplies | ||
Target Segment | Component | Price |
Budget | Athenatech A602 Black/Silver with 350W PSU | 62 |
Mid-Range | Antec SLK3700-BQE with 350W | 91 |
High-End | Antec True480 480W PSU | 95 |
High-End | Antec Lanboy Aluminum | 96 |
High-End | Ultra X-Connect 500W PSU | 98 |
High-End | Thermaltake VA3000 Dream Tower Tsunami with 400W PSU | 135 |
Mid-Range SFF | Shuttle XPC SN95G5 (AMD socket 939) | 299 |
Depending on your personal tastes, a case can be simply a box to hold your components or it can be a fashion statement. Some cases are built to be more accessible than others, but once a system is assembled, that doesn't matter anymore. The only factors that you will notice are the noise level and appearance. For appearance, SFF cases are a reasonable suggestion, while noise levels are harder to address. Some people can tolerate higher noise levels than others, and you can always try to find lower RPM fans or install a fanbus in order to reduce the noise levels. Larger 120mm fans can also reduce the amount of noise emanating from your case by moving the same amount of air as a faster spinning 80mm fan. The power supply will also contribute to the noise levels, but more importantly, a low end power supply can actually cause a high end system to crash. The AntecTrue480 and the Ultra X-Connect are both high quality parts that should allow even the most powerful systems to run reliably. They won't improve performance, but we value stability over performance.
Displays | ||
Target Segment | Component | Price |
Budget | Samsung 793DF 17 Black/Silver CRT (1280x1024@75 Hz) | 139 |
Mid-Range | Samsung SyncMaster 997DF 19 CRT | 234 |
High-End | Samsung 172X 17 LCD | 429 |
High-End | NEC/Mitsubishi FP2141SB-BK 22 | 634 |
High-End | ViewSonic VP912B 19 LCD 12ms | 710 |
Like the case of your system, displays can either be a functional unit or a statement of style. The latter generally requires the use of an LCD panel, as it is hard to consider a bulky CRT as stylish. If you can afford it and have the desk space, a large 22" CRT still provides what is arguably the best gaming experience. Whichever path you choose, remember that a high quality display can easily last through three or more computer upgrade cycles. The initial investment may be painful to bear, but $600 for six or more years of quality use is a good investment.
Speakers and Sound Cards | ||
Target Segment | Component | Price |
Speakers | Logitech Z-640 5.1 | 52 |
High-End | Creative Labs Audigy 2 ZS | 75 |
High-End | M-Audio Revolution 7.1 | 92 |
Mid-Range+ | Logitech Z-5300e 5.1 THX Certified | 159 |
High-End | Logitech Z-680 5.1 THX Certified | 236 |
Finally, we come to the sound category. For most users, integrated audio is more than enough to handle even the most recent games. If you're something of an audiophile, we recommend spending more on speakers before you look into purchasing a better sound card. Once you're at the $200+ speaker price point, however, a separate audio card can provide a noticeable difference in sound quality. If you happen to notice a high-pitched hiss coming from your speakers, an add-in card can also cure that ailment. While the audio codecs and sound processing capabilities are usually sufficient with integrated audio, some motherboards do generate a lot of noise.
Of these parts, the only areas that we would really suggest that you take a look at are the displays and hard drives. Capacity is our primary concern with hard drives, so if you store a lot of movies and music on your system in addition to games and other documents, a larger hard drive would be almost a requirement. For the displays, given their longevity relative to the rest of the system, upgrades can be with you for years to come. For gaming, we definitely recommend getting a display that can handle the highest refresh rates possible. Enabling VSYNC (Vertical Synch) will avoid tearing, but it can have a massive impact on frame rates. Running with VSYNC disabled, on the other hand, will result in noticeable tearing in many games. (Tearing is what you get when the frame buffer is updated while the monitor is in the middle of refreshing the screen's content.) At refresh rates of 100+ Hz, tearing is very difficult to notice; however, at 60 to 75 Hz, we definitely feel that it results in a loss of image quality.
70 Comments
View All Comments
SDA - Wednesday, December 1, 2004 - link
Whoops, I'd forgotten all about this thread.400W is fine if that's what you want, since it's your system. I wouldn't recommend to others that they spend much more for a 400W PSU (as opposed to spending more to get a higher-quality 350W or 380W PSU) when the average high-end Athlon 64 rig consumes 230W or so under load, though. I'd define 50% more than is necessary under full load "moderate," how about you?
520W is still overkill for SLI 6800GTs on an A64, although not as bad as 400W is overkill for the average A64. As I recall, SLI 6800Us on a high-end A64 eat something like 350W of power (decked out with HDDs and fans and whatnot, of course). 470W is perfectly fine there (although I'd personally just get a Tagan 480W, which should be the same and cheaper + less gaudy to boot). Again, you're welcome to do what you want, but you have an obligation to research system power consumption before you make recommendations to others.
As for E-Power/Tagan, the amperages really aren't very different. Furthermore, just because they don't look the same doesn't mean they're not. They use very similar components, have an identical layout, and use the same PCB. Trust me, PCB and components say a lot more than paint job ;) Googling Tagan and PowerStream should give you some nice solid evidence (and juicy internals pics!).
Again, nothing against the guide in general.. I just ask that you research the subject more in the future.
JarredWalton - Friday, November 26, 2004 - link
"Moderate PSU" in my book means >=400W these days. If a 350W generic PSU isn't sufficient, are you really going to want to spend $25 to $30 (shipped) for something that is the same wattage but more reliable? Maybe, but I wouldn't. If I buy an add-in PSU, I'll get at least a 400W.520W *is* overkill for most systems, but if you look at what I said it makes sense. If you want SLI with two 6800 GT or 6800 Ultra cards, you're probably going to have two (or more) hard drives and a lot of other stuff as well. I would spend the extra money for the 520W in that case. Regarding the OCZ = Tagan comment, I would have to see some really concrete evidence of that. Judging by The Egg, they're not the same:
http://www.newegg.com/app/viewProductDesc.asp?desc...
http://www.newegg.com/app/viewproductdesc.asp?desc...
The E-Power/Tagan has very different amperages than the OCZ. The shells are also different. Both are quality power supplies, of course, but even if they share some common components, that doesn't make them "the same."
Anyway, the PSU comments are duly noted and I will make sure to mention this item more clearly in the future. Please move on from the PSU comments now... nothing to see here. ;) (If you really want to comment more on the PSUs, you can. I'm only kidding people.)
SDA - Wednesday, November 24, 2004 - link
First thing to say: I don't want to sound insulting or condescending in any way. I think this is a good guide, and it's a lot of work to get a guide that a lot of people agree on as being good-- especially one as extensive as this.Now then. No, a good PSU will NOT add $50+ to the total for the budget systems. Fortron/Sparkle and TTGI power supplies are known to be solid units, if not amazing, and ones of appropriate wattage (300-350 is fine for a PC like the budget box) can be obtained for a reasonable $20-25 new. Is paying an extra 2.5~3% to avoid seeing a cheap POS PSU fail in an amusing fashion (possibly taking parts with it, I saw a Powmax unit take out an XP and mobo) and/or avoid instability worth it? Well, sure, I think so. Would you be willing to save $20 and go with cheap generic memory? Didn't think so.
And yeah, I realize the budget systems aren't meant for overclocking. That doesn't matter. I've been to the AMD official processor support forums too, and I've also worked as a tech support (paid and all, although FWIW a lot of the people that help out on those forums know what they're talking about more than pro tech supports), and I can say for certain that the biggest problem with DIY systems is cheap power supplies. They can be problematic even at stock clock speeds, and it's certainly not as if the budget systems are little old P2s that'll barely eat any power at all.
I'd also like to add, for the sake of balance, that 520W is overkill. Quality > quantity; you don't need a 450W PSU to achieve stability, not even if you're running an insane system. Oh yeah, and OCZ PowerStreams are the same as Tagans, and you can get those for pretty cheap (480W Tagan = ~$80 at the Egg of New).
JarredWalton - Wednesday, November 24, 2004 - link
54: The OCZ PowerStream is undoubtedly a good PSU, particularly for overclocking. That wasn't a primary concern with this Guide, so I didn't mention it as we have repeated that recommendation quite a few times. It's about $140 which is quite a lot for a power supply. On the other hand, for those seriously considering SLI with 6800 GT or Ultra cards, a power supply of that quality would be almost required.PseudoKnight - Wednesday, November 24, 2004 - link
Jarred, try the Logitech MX310. It has the Button4 and 5 on opposite sides like you prefer. (as I do, that's why I got one)Precise - Wednesday, November 24, 2004 - link
In your Oct. 1st Athlon 64 Memory: Rewriting the Rules review Wesley Fink stated:"We found that replacing a well-respected 465 watt PS with a 520 watt PowerStream allowed even higher memory overclocks. This was true with both the power-hungry nVidia 6800 Ultra as well as the more mainstream ATI 9800 PRO. If top memory overclocks on the Athlon 64 is your goal, don't skimp on the power supply. Putting the best PS that you can find in your system will pay off in higher memory overclocks with greater stability"
So if you want the fastest memory/system with overclocking you should get a 520 watt PS per Wesley Fink's own recommendation and review.
Glassmaster - Wednesday, November 24, 2004 - link
"Part of the problem, of course, is that many generic PSUs might work well for a couple months and then fail, and that's something that is nearly impossible to test."That might be a good reason not to recommend them :P. Keep up the good work, I would look forward to a PSU roundup.
Glassmaster.
JarredWalton - Wednesday, November 24, 2004 - link
blckgrffn - It's $40 now, it looks like, and despite the name "Silent Power" the dual 80mm fans are not at all silent. The Polo12 is quieter, but it's also about $30 more. $40 for the 420W Thermaltake isn't too bad, though.As for a PSU roundup, I would have to do a lot more research into that subject before actually doing something like that. There are probably people better qualified to do a PSU roundup than me, of course, but it is an interesting topic. I may run that by some of the others to see if they have any thoughts on the topic. Part of the problem, of course, is that many generic PSUs might work well for a couple months and then fail, and that's something that is nearly impossible to test.
Glassmaster - Tuesday, November 23, 2004 - link
Jarred:Thanks for the response. I make a big deal about it because the weak PSU thing is something that lots of people don't know about that ought to be better publicized. Perhaps a future article could be devoted to this topic?
Glassmaster.
blckgrffn - Tuesday, November 23, 2004 - link
Sigh. And I have personally used 3 and really like them. Man, got to keep myself from hitting the "Post Comment" button for at least five seconds after I think that I am done typing...