OCZ Fatal1ty Internals

Here we have a typical Sirtec design with three heatsinks and so-so soldering quality. The EMI filtering is equipped well, but there is no MOV. It's nice to see that there are no Transcend Electrolytic capacitors from China; now they use Teapo, even if they have chosen the cheap models. The Teapo LH doesn't have the longest lifetime and lowest ESR; however, we've never detected a problem with Teapo in power supplies.

Note that the X-cap behind the entrance is isolated, since there is not much space between the entrance and the heatsink in the secondary circuit. In summary, the Fatal1ty has better caps and better insultion than the OCZ ModXStream Pro. Nevertheless, the improvements are not enough to really make this a new product. It's a decent design with a reasonable price, but despite the Fatal1ty name you won't get any extra frames per second. Now let's see how it performs in our tests.

OCZ Fatal1ty OCZ550FTY OCZ Voltage Regulation and Quality
Comments Locked

82 Comments

View All Comments

  • Gonemad - Wednesday, November 3, 2010 - link

    I had a Thermaltake ThoughPower (can't remember exact model) that performed fairly for 5 years. It operated non-stop for 1 year in-between that time. I bought it separately from a Thermaltake Case, that had several fans. Worth every dime, both of them.

    But...

    I had to replace an original case fan, so I decided "what t'e hell' and slapped a cheap-o-dozen fan in its place. VERY. BAD. IDEA.

    The whole thing worked fine for 6 months, then the ASUS metering software showed steady voltage dropping, curiously on the 3.3V rail as I later found out. Then it alarmed in an intermittent fashion, for no apparent reason, as it got to 10% Low Voltage on that rail.

    Guess what? The fan LOCKED, and effectively pushed the PSU to 110% or above (who knows?), FOR FREAKING 6 MONTHS.
    THE PSU DIDN´T QUIT ON ME.

    As I opened it for regular maintenance (hey, 6 months, remember?) I found the locked fan, and a funny smell that could be felt only very near the PSU vent. You know the smell, don't you? That's the smell of a dying PSU. The fan almost burned my hand when I touched it, proving that the PSU was not at fault; in fact, it performed above and beyond any expectation, and possibly avoided a fire hazard. It was still operational when I removed it, but the smell was ever greater each time it was turned on, even for a few minutes, proving the whole thing had collapsed after all that operating time. The fan didn't short out, which would have triggered any safety (fuse, probably?) on the PSU, it just didn't rotate anymore on its bearings, and became a power drainer on the circuit, eating away the average life-time of the component.

    The good PSU purchase decision not only proved a wise decision, it avoided me lots of hassle and grief. The cheap fan, on the other hand, destroyed a perfectly good piece of equipment.

    "Caveat Emptor" indeed.
  • gurboura - Saturday, November 6, 2010 - link

    It seems right from the start that you have something against TechSolo, you also talk about how it was loud at almost 30dbA, but yet, the Antec is at 32 and the OCZ tops at 26, still close to that 30dbA level.

    "If you want to have a silent computer, please buy another power supply and protect your ears." Couldn't this have been said the same for the Antec since it was actually louder than the TechSolo?

    When doing doing these type of articles your supposed to have an unbiased opinion and its pretty obvious from the start that that wasn't true.

Log in

Don't have an account? Sign up now