DPI: Too High?

The real question with a 24” UltraHD display is how well can you see/use it at native resolution? To me, it’s simply not usable at 3840x2160 resolution without DPI scaling. If you want to try and use it at this resolution you can, but I imagine you will stop after a short period of time. Scaled to 150% (or 2560x1440, which OS X Yosemite also supports as an option) it is easy to read and use everything. With applications that support DPI scaling correctly, like Lightroom, you can also have elements that are scaled while images utilize all the pixels that UHD offers.

Talking to NEC, they also realize that most people will be scaling images on the display. One issue, beyond OS support, is that applications that use custom UI elements take more work to improve for HiDPI and UltraHD displays. Those applications that only use standard OS elements (normal menus, no icons or images like Photoshop or Paint.NET) can migrate to supporting HiDPI far more easily.

There are many areas where UHD displays, even a smaller 24” one, are very valuable for their larger screen area. Content creation, including images and videos, can utilize the extra space. Financial users, who always want as much data on hand as they can have, are another large market. NEC includes DICOM support so the UHD display works for examining x-rays in as much detail as possible.

As I mentioned before, SpectraView II now works with the EA-series displays starting with the EA244UHD. Compared to the PA-series there are a few limitations to what SpectraView can do. It will calibrate the grayscale and color using the internal LUTs, but your only color gamut target is native. Since the EA244UHD has a large gamut that covers AdobeRGB, this causes issues. SpectraView II will create an ICC profile that lets ICC-aware applications see colors perfectly, but non-ICC applications will have a blown-out gamut. Since the EA244UHD also has an sRGB emulation mode, you can still use non-ICC applications and get an accurate gamut, but you must do so without calibration.

SpectraView II also now supports the BT.1886 gamma curve that is becoming more common in home theater use. One feature I was hoping to see, but NEC says will not be there, is support for 4:2:0 chroma subsampling over HDMI. Since HDMI 2.0 chipsets are just now becoming available, fitting a 60Hz UltraHD signal into the HDMI 1.4 bandwidth requires use of this chroma subsampling. For video content this is perfectly fine, Blu-ray and DVD content has always used it, and some vendors have used it with HDMI 1.4 chipsets. The NEC does not so the highest refresh rate you can achieve with an UltraHD signal over HDMI is 30Hz.

Meet the NEC EA244UHD Brightness and Contrast
POST A COMMENT

57 Comments

View All Comments

  • willis936 - Thursday, August 07, 2014 - link

    I think a better solution than the chroma subsampling to achieve 4k60 today would be to use two connectors and stitch the picture together at a high level. It would take bigger buffers on the display and some additional circuitry but there's no reason a display driver couldn't pull this off with existing hardware. 4k60 is already the high end so I don't see why corners need to be cut, especially when displays like this tick all of the feature boxes and come with a bajillion different connectors. Reply
  • NECDisplaySolutions - Friday, August 08, 2014 - link

    Hello. This can be done on the EA244UHD with the Picture by Picture modes, either 2, 3 or 4 way. A 4-way Full HD configuration over HDMI and DVI would give you 60 Hz support. Or you could just use 1 DisplayPort cable. Reply
  • marcosears - Thursday, October 09, 2014 - link

    This is a nice try from NEC, but it just doesn't meet the standards of some of the really good monitors on the market today. /Marco from http://www.consumertop.com/best-monitor-guide/ Reply
  • gevorg - Thursday, August 07, 2014 - link

    Does it use PWM? If yes, at what brightness levels?

    http://www.tftcentral.co.uk/articles/content/pulse...
    Reply
  • kepstin - Thursday, August 07, 2014 - link

    This is an LED-backlit model, so it almost certainly uses PWM for backlight control. I'd be interested to know what frequency it runs at. Reply
  • xenol - Friday, August 08, 2014 - link

    Not every LED backlight uses PWM. Reply
  • NECDisplaySolutions - Friday, August 08, 2014 - link

    Hello. The PWM frequency on this monitor is 23kHz. You can see all of the product specifications for the EA244UHD here: http://www.necdisplay.com/p/desktop-monitors/ea244... Reply
  • Ahriman4891 - Thursday, August 07, 2014 - link

    PWM frequency is 23kHz, mentioned in this press release: http://cinescopophilia.com/nec-4k-24-inch-multisyn... and confirmed by a NEC rep on hardforum. Reply
  • NECDisplaySolutions - Friday, August 08, 2014 - link

    You are correct. The PWM frequency on this monitor is 23kHz. You can see all of the product specifications for the NEC EA244UHD monitor here: http://www.necdisplay.com/p/desktop-monitors/ea244... Reply
  • DanNeely - Thursday, August 07, 2014 - link

    Does NEC still use much larger than normal boxes? My 3090's box was several inches larger in every dimension than the box that a friends 30" Dell monitor came in. Reply

Log in

Don't have an account? Sign up now