SAP S&D Benchmark

The SAP SD (sales and distribution, 2-tier internet configuration) benchmark is an interesting benchmark as it is a real world client-server application contrary to many server benchmark (such as SpecJBB, SpecIntRate, etc.). We looked at SAP's benchmark database for these results. The results below all run on Windows 2008 and MS SQL Server 2008 database (both 64-bit).

Every 2-tier Sales & Distribution benchmark was performed with SAP's latest ERP 6 enhancement package 4. These results are NOT comparable with any benchmark performed before 2009. We analyzed the SAP Benchmark in-depth in one of our earlier articles. So far, our profile of the benchmark shows:

  • Very parallel resulting in excellent scaling
  • Likes large caches (memory latency)
  • Very sensitive to sync ("cache coherency") latency
  • Low IPC
  • Branch memory intensive code

We managed to get even better profiling of the benchmark. IPC is as low as 0.5 (!) on the most modern Intel CPU architectures. About 48% of the instructions are loads and stores and 18% are branches. One percent of those branches is mispredicted, so the branch misprediction ratio is slightly higher than 5% on modern Intel cores.

Especially the instruction cache is hit hard, and the hit rate is typically a lot lower than in other applications (probably 10% misses and lower). Even the large L3 caches are not capable of satisfying all requests. The SAP SD benchmarks needs between 10-30GB/s, depending on how aggressive the prefetchers are.

SAP Sales & Distribution 2 Tier benchmark

SAP is one of the benchmarks that scale very well and it is shows: the server CPUs with the highest thread count are on top. We remember from older benchmarks that enabling Hyper-Threading (on Nehalem and later) boosts SAP's performance by 35%. As the IPC of a single SAP thread is relatively low (0.5 and lower), the decoding front end of the Bulldozer core should be able to handle this easily. Therefore, the extra integer cluster on the Opteron can really do its magic.

We don't have any Xeon X5650 benchmarks, but a quick calculation tells us that the new Opteron 6276 should be about 20% faster than the X5650. It is also about 18% faster, clock for clock, than the older Opteron 6176. The new Opteron does well here.

Sysbench: MySQL OLTP Making Sense of the New Interlagos Opteron
POST A COMMENT

46 Comments

View All Comments

  • tech6 - Thursday, February 09, 2012 - link

    We have a number of these in our data center and they have been a disappointment. Single threaded performance is low and the memory sharing performance under VMWare is poor. That leaves it only competitive for DB and web servers work which is OK but it doesn't make a compelling case for the architecture as similar Intel offerings perform well in all tasks. AMD still has a small price advantage, but once you add the VMWare licensing and data center costs the percentage difference is negligible. Reply
  • duploxxx - Thursday, February 09, 2012 - link

    Typical answers, I debate such results all the time with many IT departments all over the world so called "standardized on and runs bette on" statements. So you have a large number of these new Opteron 6200 series already in datacenter and already got this info out of it, yeah right. Our virtual datacenters with approx 1000 servers exist out of AMD based systems, the only time i thought about swapping to intel after performance/price/power review was when intel released the Nehalem (oh and perhaps the Socket R but can't disclose that yet, neither do I want to swap that fast knowing that abu dhabi is about to go in Beta samples already). In the low price 2s-4s (not talking about the over expensive EX versions) the AMD are still owning the virtualization with there multicore and more memory channels with lower price.

    Poor single thread has indeed been an issue for magny cours to a certain extend but not that it is noticable on a normal level of applications (you sound like a superpi user that only looks at theoretical results), poor memory sharing, care that to explain :). I suggest you have a look at general best practices on power settings for virtualized environments before complaining about response and throughput.
    These response time result measured here are not noticable in any general application and once adding some kernel overhead from NFS/iscsi or whatever in medium - high load servers forcing these tasks to HT cores will show quite a bit different result in platform performance. Anandtech Vapp results from are nice but are still not a full reflection of datacenter performance and the results are heavy influenced by the webapp which clearly seems to favor the Intel architecture. Neither does have the Vapp testing any iscsi/nfs kernel related tasks which many sites do have (to reduce infrastructure cost)

    Vmware licensing cost more for AMD? only for the enterprise edition, the abandoned vmware license version which was introduced again for v4 because of OEM pressure... time to investigate more before buying anything... advanced - enterprise plus has no difference for any core you would select and neither does v5 have.
    Reply
  • JohanAnandtech - Thursday, February 09, 2012 - link

    NFS/iSCSI: you seem to ignore the fact that besides OLTP, many apps (especially OLAP and web) run mostly out of memory. The whole idea of good data management is to make sure that your requests come out of memory. We have webcaches, database caches, file system caches, RAID caches and on disk caches...all these caches are made to make sure that the response time is NOT dominated by NFS/iSCSI.

    We have 5 years of experience building our vAPUS stresstesting client (not vApp) so don't discard our results so quickly.
    Reply
  • duploxxx - Thursday, February 09, 2012 - link

    I won't discard them as I said they are a of great value just like these testing posted today, but that doesn't change the fact that in current vApus stresstesting there is no use of NAS/ISCSI datastores which is very common these days now that 10G is affordable and creates additional overhead on systems, mostly not accounted for when selecting a platform. Sure for the review real performance conclusion are needed from cpu architectures and then this setup remains totally applicable. But you get people which i tried to answer before who take this final score result for granted and leverage it over a total platform as if that is the best choice.

    Second remains the fact that the final vApus calculation is based on all scores and the web based VM score is unbalancing the final score. I mentioned that years ago when the vApus1 and 2 were introduced, back in the old days.
    Reply
  • haplo602 - Friday, February 10, 2012 - link

    nothing that features heavy modifications will run out of memory .... do you cache your database redologs ? bad idea.

    similar for web servers that get heavy modifications.

    all the caches exist to only make the transition between respons time jumps less painfull, but they never remove those limits.

    if you have a static system (reads 99% of the time) then you can use caches a lot. untill the data set grows too large to cache and is sufficiently random.
    Reply
  • Iketh - Thursday, February 09, 2012 - link

    This was a fun read. Unfortunately, the thought still in the back of my mind while reading was why in the hell did AMD reinvent the P4??? I just don't get it.

    I hope the coorporate players who resigned fired some engineers prior...
    Reply
  • duploxxx - Thursday, February 09, 2012 - link

    very interesting info as usual, thx for the indepth review.

    In general I think it would be added value to mention what exact BIOS and power mngmnt settings have been set. Since the option exist of using PCC controlled power (BIOS - OEM) or through the OS, also settings like CE6 etc does influence the final results a lot on turbo etc, mainly towards your preliminary review and this one it's not always clear what exactly you have been using.

    result wise it is very strange that the 16core does not scale further then the 12core in SQL, for the reference testing that would give clear results when you could have tested the 6234-6238 which are also 12core versions. It is hard to believe that these 16core do not scale further, that they lack about 10-15% IPC @ same ghz sure but not raw performance in core count.

    Debatable is the fact that while using Dual rank 4MC on AMD and using 2 rows Dual rank 3MC on the intel, dual row dual rank will give more bandwidth, its not AMD fault they have 4MC vs intel only 3MC.... even Intel next gen will have a serie of 3MC and 4MC..... but this should not result in major differences.

    Last point, which IS a fact --> the price compare. While listed price might be comparable, reallity is quite a bit different in retail sales price. For large volume handling the discount between vendor is huge, the discount that Intel allows on it's CPU is way less then AMD, this changes the final cost price a lot.

    Reply
  • JohanAnandtech - Thursday, February 09, 2012 - link

    "In general I think it would be added value to mention what exact BIOS and power mngmnt settings have been set"

    Most of them can be seen at:
    http://www.anandtech.com/show/5279/the-opteron-627...
    C6 was enabled

    "dual row dual rank will give more bandwidth"
    You can easily reverse that argument: if I use 4 GB DIMMs on the AMD, the clockspeed of the DIMMs will throttle back to 1333. The AMD IMC can only use 1600 MHz with 1 DIMM per channel. So this is really the best case for AMD.

    "For large volume handling the discount between vendor is huge"
    ok. 1. those people are probably 0.001% of our readership. 2. Those prices are a moving and unknown target.
    Reply
  • duploxxx - Thursday, February 09, 2012 - link

    yes I have seen those settings, but during the review with so many back and forth testing showing issues on the power and bios settings from a reader perspective it is no longer clear what exact bios settings have been used (ms os - hypervisor) and what has been used and if results were updated with the right BIOS settings.

    I am not yet convinced that the 1600 is really added value for the 6200 series, perhaps it will be more added value on piledriver with enhancements. While 8GB ram prices did drop it is still not a default selection certainly not on 1600 speed. I did mention debatable memory :) did you test the difference in the Database benchmarks?

    Its not only large volume where the discount is even greater, just look at the HP website and order 3 "similar" designs from the same vendor:

    dl380 dual E5649 - 8gb ram : 5953$ (add 8gb ram + 150$ approx)
    dl380 dual X5660 - 24gb ram: 7178$ (remove 8 gb ram -150$, identical PSU -100$)
    dl385 dual 6272 - 16GB ram: 5202$

    so you can see quite a bit different price range.
    http://h71016.www7.hp.com/dstore/MiddleFrame.asp?p...
    http://h71016.www7.hp.com/dstore/MiddleFrame.asp?p...
    http://h71016.www7.hp.com/dstore/MiddleFrame.asp?p...
    Reply
  • alpha754293 - Thursday, February 09, 2012 - link

    Johan:

    I know that you and I have spoke a little bit offline about possibly doing more HPC and HPC-related testing.

    I, for one, would still like to see more of that because I think that's one area that a) is underserved by hardware review sites (sometimes with good reason), b) I think that it stresses the CPUs more/harder, and c) you can create/do/use a consistent benchmark test cases or suite of applications (like you mentioned about the SPEC OpenMP (although they have an MPI one as well, which I think is probably going to be even better).

    I think that the biggest downside is that the HPC applications DO take a fairly significant time to run. (Some of them runs for days on end - just to do one pass).

    And you can always throw more Hypervisors onto these systems, but I don't think that they're nearly as taxing as when you're running a computationally heavy/demanding application like simulating a car crashing into a wall at 35 mph. :oD

    And it's quite possible that you might be able to script the entire benchmarking process...
    Reply

Log in

Don't have an account? Sign up now