The AMD Radeon R9 295X2 Review
by Ryan Smith on April 8, 2014 8:00 AM EST- Posted in
- GPUs
- AMD
- Radeon
- Radeon 200
Crysis 3
Still one of our most punishing benchmarks, Crysis 3 needs no introduction. With Crysis 3, Crytek has gone back to trying to kill computers and still holds “most punishing shooter” title in our benchmark suite. Only in a handful of setups can we even run Crysis 3 at its highest (Very High) settings, and that’s still without AA. Crysis 1 was an excellent template for the kind of performance required to drive games for the next few years, and Crysis 3 looks to be much the same for 2014.
Crysis 3 is another title that regular favors NVIDIA cards, and despite AMD being able to close the gap through superior Crossfire scaling the 295X2 still trails the GTX 780 Ti SLI at all resolutions. That said, AMD does at least make it relatively close, and all the while manages to crack 60fps at 2160p with Medium settings, which is about as good as any dual-GPU setup can hope for in Crysis 3 right now.
When it comes to our look at frame pacing, Crysis 3 is the one game where even the XDMA-equipped 295X2 is struggling to meet our own standards for acceptable frame pacing. Our normal threshold here is 20%, which the 295X2 just misses. The remaining difference is under 2% and in all likelihood should not be a significant problem for smoothness (it certainly hasn’t been an issue in our testing), but nonetheless it’s a game that could stand to see further improvements in AMD’s drivers.
131 Comments
View All Comments
Smartgent - Tuesday, April 8, 2014 - link
The card is watercooled!! not aircooled like Nividia chose to do with their 500W TitanZ. Ishould run very quiet, and should not affect your internal temps much, as long as you mount the radiator externally to your case.Ian Cutress - Tuesday, April 8, 2014 - link
It's a shame they're not making a version with a larger liquid cooler. Would like to see it with a 2x120 CLC and an overclock.jtd871 - Tuesday, April 8, 2014 - link
This card should have just been released with a full-cover block and let the enthusiasts/3rd-parties use whatever custom cooling they like.Rambon3 - Tuesday, April 8, 2014 - link
Great article. I wish I had a spare grand and a half to replace my 7970 CF set up. BTW It looks like you have an extra GPU Load temp chart on Page 17 where the Load noise chart should be positioned.randomhkkid - Tuesday, April 8, 2014 - link
I may have missed it in the article but I don't think you mentioned whether or not it would be possible to add an additional fan on that asutek cooler? This would surely bring down stock temperatures (albeit increase the noise) if one was thinking about overclocking further.Ryan Smith - Tuesday, April 8, 2014 - link
Yes, it's possible. You would need to come up with a matching fan and the screws to mount it, but there's nothing from a hardware perspective keeping you from mounting a second fan for push-pull. I don't know if it's easily visible in our pictures, but the fan power connector is exposed mid-way along the cable run, so you can split it there to get a second fan power header.mpdugas - Tuesday, April 8, 2014 - link
push-pull, perhaps?Gunbuster - Tuesday, April 8, 2014 - link
The perfect card for high resolution multi monitor rigs, oh wait frame pacing is still broken. Don't worry, just send in your $1500 and they'll fix it sometime in 2015 (maybe)JDG1980 - Tuesday, April 8, 2014 - link
Pay closer attention to the article. Frame pacing is still imperfect *on the old 7990*, not on the R9 295X2. It works fine on GCN 1.1 cards (290/290X/295X2) due to the new XDMA engine.Admittedly, it was odd for them to throw in some 7990 bashing in the review of a new card, so I can understand the confusion.
Mondozai - Tuesday, April 8, 2014 - link
Why are you asking people to pay attention to articles they are commenting on?This is the internet.