Power Consumption

With a more reasonable sized drive in house, we're able to find out just how power efficient the Octane really is. At idle, the drive still uses more power than the competition but under load it's actually quite good - about on par with SandForce's SF-2281 (or better depending on the workload).

Drive Power Consumption - Idle

Drive Power Consumption - Sequential Write

Drive Power Consumption - Random Write

Performance Over Time & TRIM Final Words
Comments Locked

38 Comments

View All Comments

  • jramskov - Wednesday, December 28, 2011 - link

    My desktop (i7-920 based, Win7 64bit) currently have a 160GB Intel G2 as a boot drive, but my data drive is currently an older 500GB Seagate.

    Workload: Primarily editing images in Lightroom, etc. (compressed RAW files from a Nikon D700 currently).

    I would like to replace the Seagate with a 256GB SSD, but which one would be recommended for such a workload?
  • Denithor - Wednesday, December 28, 2011 - link

    Standard recommendations are:

    Intel 320
    Crucial M4
    Samsung 830

    All are known for high dependability. Last two use sata III controllers, which you do not currently have on your system, but would become faster when you eventually upgrade your system. (And will therefore remain competitive longer.)
  • jramskov - Wednesday, December 28, 2011 - link

    Thanks.

    I was thinking along those lines and not the Sandforce based as I'm generally working with compressed data.

    And true, I don't have sata III controllers, but I don't think my system is worth upgrading just yet :)
  • JackF - Wednesday, December 28, 2011 - link

    I have a similar system (i930) and currently have a OCZ Max IOPs 120gb for my boot drive, and an OCZ Vertex 3 120gb as my game drive (along with a 600gb Velociraptor for data).

    When I first got the MAX IOPs drive, I had occasional issues with the drive disappearing (would need a reboot), but with the firmware updates, this drive has been running for 2-3 months with no problems. I never had any problems with the Vertex 3, but I got it later and it had newer firmware.

    I think the reliability issues have been resolved with the Sandforce 2281 controller and I would not rule these out as they have come down in price.

    Even if you add an SSD for working with your large photo data, Keep the Seagate as a data back-up.
  • jramskov - Thursday, December 29, 2011 - link

    I was avoiding the Sandforce based SSD's because they are best for data that can be compressed, my images are already compressed. Images are relatively big (spanning from 5-15MB or so), so my thinking is that I should be looking at sequential read/write performance and less on random read/write performance.

    I have no doubt though that almost no matter what SSD I choose, I will get a quite nice performance boost.
  • JonnyDough - Wednesday, December 28, 2011 - link

    He could also get a SATA 6GB/s controller card.
  • ckevin1 - Wednesday, December 28, 2011 - link

    Be careful of this -- the total bandwidth of a PCI-e 1x slot is only 500 mb/s. That's less than the maximum SATA III speed, and if you hook up more than one drive you could actually cap out at less than SATA II performance for each disk.

    Maybe there are more expensive adapter cards that plug into a different PCI-e slot, but I would be inclined to only rely on motherboard connections for true SATA III speeds for the time being.
  • StanFL - Wednesday, December 28, 2011 - link

    Good review. In the last paragraph on the final page, myriad is spelled incorrectly.
  • Denithor - Wednesday, December 28, 2011 - link

    No spell checker? Sheesh...
  • JonnyDough - Wednesday, December 28, 2011 - link

    You must be new here. And by here I mean the internet...

    Education in America is at an all time low.

Log in

Don't have an account? Sign up now