Audio Performance

We limited audio testing to the Rightmark 3D Sound version 2.2 CPU utilization test and tested with sound enabled to show the performance effects on several games. The Rightmark 3D Sound benchmark measures the overhead or CPU utilization required by a codec or hardware audio chip.

The Realtek ALC-883 was tested with the recently released 1.33 driver set. The Realtek audio drivers do not support more than 32 3D buffers at this time, so the scores cannot be directly compared to the Creative Labs Sound Blaster X-FI card in the benchmarks.

Audio Performance - Empty CPU - 32 Buffers

Audio Performance - 2d Audio - 32 Buffers

Audio Performance - DirectSound 3D HW - 32 Buffers

Audio Performance - DirectSound 3D EAX2 - 32 Buffers

The Realtek ALC-883 codec has competitive CPU utilization rates when compared to the Realtek ALC-882 and ALC-850 codecs. The ALC-883 offers significantly better audio quality than the ALC-850 based systems and very similar audio quality to the ALC-882. The ALC-883 is actually a value based design of the ALC-882 while offering nearly the same audio quality and performance. In our subjective headphone testing, we noticed a slight difference between the two codecs with the output from the ALC-883 sounding clearer in the mid-range tones. However, the difference was negligible when utilizing our 5.1 or 7.1 speaker setup in a typical room environment. The Sound Blaster X-FI has the lowest overall rates with the ALC-883 solution following closely. Let's find out how these results translate into real world numbers.

Game Audio Performance - Serious Sam II - Branchester Demo

Game Audio Performance - BattleField 2

Game Audio Performance - F.E.A.R. - Performance Test

The audio performance numbers remain consistent as the Realtek ALC-883 consistently finishes near the SoundBlaster X-FI in our benchmarks. Serious Sam II has an average loss of 41%, Battlefield 2 at 19%, and F.E.A.R. at 3%.

The output quality of audio with the Realtek ALC-883 ranks with the ALC-882 as the best of the on-board HD audio solutions that we have heard and continues to improve with each driver release. The vast majority of users should have no issues utilizing the ALC-883 as their primary audio solution, considering the overall quality of audio and performance at this time.

Obviously, if you are a serious gamer, then a dedicated sound card is still a requirement to ensure consistent frame rate averages across a wide variety of games and, in the case of the Sound Blaster X-FI, improved audio quality. The audio specifications for the ALC-883 can be located here.

Ethernet Performance Final Words
Comments Locked

12 Comments

View All Comments

  • mindless1 - Saturday, March 25, 2006 - link

    Well, you could just tell us. Previously ECS used a lot of OST caps but these may be Panasonic FM? (at least some, the 10mm x 25(?)mm look like it in the VRM. More significant might be the lack of capacitors for memory, could be part of why the board is a bit fickle about o'c.
  • Per Hansson - Saturday, March 25, 2006 - link

    Sounds very good Gary ;-)

Log in

Don't have an account? Sign up now