Energy Consumption

We tested the energy consumption of our servers for a one-minute period in several scenario. The first scenario is the point where the server under testing performs best in MySQL: the highest throughput just before the response time goes up significantly. 

To test the power usage of the FPU, we measure the power consumption when POV-Ray was using all available threads. 

SKU TDP
(on paper)
spec
Idle
Server

W
MySQL
Best Throughput
at Lowest Resp. Time (*)
(W)
POV-Ray
100% CPU load
Dual Xeon E5-2699 v4 2x145 W 106 412 425
Dual Xeon 8176  2x165W 190 300 453
Dual EPYC 7601 2x180W 151 321 327

Both the Xeon 8176 and Dual EPYC server had a few more additional components (a separate 10 GBe card for example) than the Dual Xeon E5-2699v4 system, but that does not fully explain why idle power is so much higher, especially on the Dual Xeon 8176. We lacked the time to fully investigate this, and the last two systems have relatively new firmware.

The only conclusion that we can draw so far, is that the EPYC 7601 is likely to draw more power when running integer applications, while the rather wide FP units of the Intel CPUs are real power hogs even if they do not run heavy AVX applications. To be continued...

Floating Point performance Closing Thoughts
Comments Locked

219 Comments

View All Comments

  • msroadkill612 - Wednesday, July 12, 2017 - link

    It looks interesting. Do u have a point?

    Are you saying they have a place in this epyc debate? using cheaper ddr3 ram on epyc?
  • yuhong - Friday, July 14, 2017 - link

    "We were told from Intel that ‘only 0.5% of the market actually uses those quad ranked and LR DRAMs’, "
  • intelemployee2012 - Wednesday, July 12, 2017 - link

    what kind of a forum and website is this? we can't delete the account, cannot edit a comment for fixing typos, cannot edit username, cannot contact an admin if we need to report something. Will never use these websites from now on.
  • Ryan Smith - Wednesday, July 12, 2017 - link

    "what kind of a forum and website is this?"

    The basic kind. It's not meant to be a replacement for forums, but rather a way to comment on the article. Deleting/editing comments is specifically not supported to prevent people from pulling Reddit-style shenanigans. The idea is that you post once, and you post something meaningful.

    As for any other issues you may have, you are welcome to contact me directly.
  • Ranger1065 - Thursday, July 13, 2017 - link

    That's a relief :)
  • iwod - Wednesday, July 12, 2017 - link

    I cant believe what i just read. While I knew Zen was good for Desktop, i expected the battle to be in Intel's flavour on the Server since Intel has years to tune and work on those workload. But instead, we have a much CHEAPER AMD CPU that perform Better / Same or Slightly worst in several cases, using much LOWER Energy during workload, while using a not as advance 14nm node compared to Intel!

    And NO words on stability problems from running these test on AMD. This is like Athlon 64 all over again!
  • pSupaNova - Wednesday, July 12, 2017 - link

    Yes it is.

    But this time much worse for Intel with their manufacturing lead shrinking along with their workforce.
  • Shankar1962 - Wednesday, July 12, 2017 - link

    Competition has spoiled the naming convention Intels 14 === competetions 7 or 10
    Intel publicly challenged everyone to revisit the metrics and no one responded
    Can we discuss the yield density and scaling metrics? Intel used to maintain 2year lead now grew that to 3-4year lead
    Because its vertically integrated company it looks like Intel vs rest of the world and yet their revenue profits grow year over year
  • iwod - Thursday, July 13, 2017 - link

    Grew to 3 - 4 years? Intel is shipping 10nm early next year in some laptop segment, TSMC is shipping 7nm Apple SoC in 200M yearly unit quantity starting next September.

    If anything the gap from 2 - 3 years is now shrink to 1 to 1.5 year.
  • Shankar1962 - Thursday, July 13, 2017 - link

    Yeah 1-1.5 years if we cheat the metrics when comparison
    2-3years if we look at metrics accurately
    A process node shrink is compared by metrics like yield cost scaling density etc
    7nm 10nm etc is just a name

Log in

Don't have an account? Sign up now