Dragon Age: Inquisition

Our RPG of choice for 2015 is Dragon Age: Inquisition, the latest game in the Dragon Age series of ARPGs. Offering an expansive world that can easily challenge even the best of our video cards, Dragon Age also offers us an alternative take on EA/DICE’s Frostbite 3 engine, which powers this game along with Battlefield 4.

Dragon Age: Inquisition - 2560x1440 - Ultra Quality - 0x MSAA

Dragon Age: Inquisition - 1920x1080 - Ultra Quality - 0x MSAA

With Dragon Age we see the R9 380X take a consistent and significant lead over the R9 380. This, I suspect, is partially a case of memory pressure, but this is also a game that more significantly benefits from the additional shading/texturing resources of the fully enabled Tonga GPU. Ultimately it’s just enough to keep the R9 380X ahead of the GTX 960 at both 1080p and 1440p.

Middle Earth: Shadow of Mordor The Talos Principle
Comments Locked

101 Comments

View All Comments

  • CaedenV - Monday, November 23, 2015 - link

    My guess is that these cards are factory OC'd, which means that they would need to be underclocked to run an apples-to-apples comparison at true 'stock' settings.
  • Zeus Hai - Monday, November 23, 2015 - link

    Can anyone confirm that AMD's Frame Limiter still doesn't work on Windows 10?
  • nathanddrews - Monday, November 23, 2015 - link

    That's news to me.

    Just for you, I tested it using my i3-2100/HD7750/W10 test mule. VSync globally disabled in CCC, VSync disabled in Dota 2, Frame Target set to 60fps. Steam overlay shows 60fps and I see no signs of tearing or stuttering. To my knowledge, it never stopped working.
  • Zeus Hai - Monday, November 23, 2015 - link

    Hmm.., it should have some tearing because it doesnt really sync with the monitor anyway, mate. Can you set it to 65, 70, 75? Mine doesnt work in LoL, I set it to 60, but it always fires up over 150fps+
  • Dirk_Funk - Monday, November 23, 2015 - link

    LoL does have its own fps limiter, so perhaps that's causing a mix-up in the software. Also, LoL might be running in fake fullscreen mode whereas the catalyst fps limiter specifies it will "Reduce power consumption by running full-screen applications at reduced frame rates." I'm gonna go try a round of LoL now because you have me curious.
  • Asomething - Tuesday, November 24, 2015 - link

    Mine does, was just benching my new 290x and forgot to turn it off so my results were skewed by the 75fps frame cap i set.
  • nirolf - Monday, November 23, 2015 - link

    There's "ASUS R9 Fury OC" mentioned in the first table in the Overclocking section.
  • Ryan Smith - Monday, November 23, 2015 - link

    Thanks.
  • Shadowmaster625 - Monday, November 23, 2015 - link

    Tonga is an epic disaster. It is less than 10% more efficient than tahiti in terms of performance per watt, and in terms of performance per transistor (fps per mm^2) it apeears to be actually worse. Meanwhile, Nvidia releases maxwell which outperformas kepler on both these metrics not by some paltry 10% or less, but by a very wide margin.
  • CiccioB - Tuesday, November 24, 2015 - link

    All the GCN architecture is a disaster.
    With TeraScale architecture AMD could fight with smaller dies and less W for a bit less performance.
    With GCN AMD has to compete using larger and power hungry dies that have brought it to go in red also in the graphics division, while with older TeraScale it at least could be at least on par.
    GCN is an architecture not up with that of the competition.
    DP64 presence is not the problem, as AMD has kept on reducing it influence over every GCN step (starting from 1/4FP and ending to 1/24FP) with no real results under the power consumption term. They probably could just spare few mm^2 on the die, but they are too way back with memory compression (I can't really believe they never thought about that) and their bus are way too big, expensive and power hungry.
    All the architecture is a fail. And DX12 is not going to solve anything, as if they ever raise their performances of 10% over the competition, they are still way back in efficiency both in terms of W and die size.

Log in

Don't have an account? Sign up now