LG also offers its own hardware and software calibration package for the 29EA93. Using a custom designed colorimeter, the hardware and software only work with LG monitors but are scheduled to sell for less than competing products from XRite and Datacolor. I mentioned earlier in the review that colorimeters are prone to errors on displays with LED backlights like the LG. This is a general rule, but since LG knows the spectral response of their displays they can program that into their own colorimeters, leading to much better results than a generic colorimeter. It usually won’t be as good as a meter profiled with a spectrometer due to sample variations, but it will be much better than without.

Using their own software and probe, I calibrated the display to the same settings I use: 200 cd/m² and a gamma of 2.2. An sRGB gamma curve is not supported, nor are colorspaces larger than sRGB with this version, but on their professional monitors with a more advanced meter, different colorspaces are supported. The process is very simple: You choose your targets, it will pop up a spot for the calibration puck on screen, and then you let it run the calibration. The process locks the monitor OSD controls as it adjusts it automatically, and then at the end it will create an ICC profile for you and install it.

To evaluate this profile, I again used CalMAN and used the same set of images that we use for our smartphone and tablet testing. Using the automated test pattern generator in CalMAN wasn’t possible, as it would attempt to load its own ICC profile and change the setting in the display. On first look, we see 197.3 cd/m² of light output and 0.19 cd/m² on a black screen for a contrast ratio of 1039:1. This wasn’t as good as I was able to achieve using CalMAN, which might indicate that it is obtaining the peak-white level differently. With CalMAN I could use the Contrast and Brightness controls to get just above 200 cd/m², allowing maximum headroom to adjust the curves to get accurate color. The LG software might not bring these down as much, and then bring down the RGB curves even more, which would lower headroom compared to the other method.

Our CCT average is 6415, but a look at the RGB balance shows that it starts out very good but then drifts a little towards the warmer, redish tint that the CCT reflects. Gamma is almost spot on at 2.21, save for a dip at 5% that most people won’t catch as they only measure in 10% increments. The dE2000 values follow the RGB balance as well, starting out very low but eventually drifting up to a level where a reddish tint will be slightly visible. The average dE2000 for the grayscale is 2.09, a number that is decent but not as good as CalMAN was able to achieve.

Looking at the Saturations and Color Checker charts, we see improvements but not to the degree that CalMAN allows. Our Color Checker dE2000 is 1.96, but with higher grayscale errors as well as larger errors in the over-saturated colors of red, yellow, and green. Blues also exhibit a bit of over-saturation as well, indicating that the LG sensor isn’t quite as sensitive as the C6 colorimeter, since blue is harder to read.

On the saturations data, we see that the Red/Yellow/Green side of the triangle has larger and larger errors as those colors get more saturated. With the over-saturated gamut, this is what we expect to see. Unfortunately none of the calibration software seems to be able to fully pull those points in and correct the over-saturated gamut there, leaving a bit of an error. The overall error is still fairly low, and with most colors not being fully saturated, that over-saturated error isn’t really bad, but better results were obtained with the CalMAN software.

Overall the LG software and hardware solution does do a decent job, but it can’t compete with what is possible using CalMAN with better hardware. Of course, the CalMAN solution with a C6 and i1Pro meter retails for closer to $2,000 than $100, so they are very different spectrums of performance. For $100, I would say the LG results are quite good and will satisfy those that aren’t graphics or video professionals most likely. Just the superior gamma will make a large difference when viewing thanks to the superior dynamic range.

AV Use and Calibration Lag Testing and Power Use
Comments Locked

108 Comments

View All Comments

  • Kittihawk - Thursday, June 6, 2013 - link

    It's a good screen but another way of looking at it is not that it's ultra-wide but that it's ultra-cropped - sadly my old Apple Cinema 30inch display failed and I go this one to replace - loosing about 1/4 of the screen size.

    Some really frustrating things you need to know - there is no display port cable in the box. That is really bad because, LG, the money I use to pay you comes from being productive and I lost a day of editing while I figured out that I needed the cable and ordered off Amazon. Additionally I was really confused about not being able to get the full resolution on the VGA connection until I worked out that without a 'display port' cable you will not get the full resolution. Also your graphics card will also need to support the higher resolution sizes and even then it may not fit exactly and you will need secondary software to tweak. That might all be obvious to the computer nerds who make these things but its not to the average end user.

    Also the 'really clever cardboard box' quoted by Chris (Chris Heinonen ) was absent - instead the usual polystyrene menace - so I think Chris you were a bit duped at times by LG. In addition there was a strong formaldehyde plastic small from the new monitor - not good in a bedroom, but soon became undetectable.

    There was also a dead pixel - never had that with any of the Mac screens I use (I have five).

    Despite all that I like it - mainly because the lower height allows me to look out of the window behind and day dream instead of doing my work!
  • Manub - Friday, July 12, 2013 - link

    I just received mine and while checking the service menu it states V1.33.
  • lawrencejob - Monday, July 22, 2013 - link

    I bought it on Saturday for £350, Amazon.

    just came by to thank you: this was an excellent review and instrumental in my purchase.

    One thing to add: I wasn't very impressed by the black levels (although I've yet to calibrate it properly) and the device does a remarkable job at looking both too small and enormous at the same time (by my calculations there's only a little between this and a 32" TV with 21:9 content).
  • lawrencejob - Monday, July 22, 2013 - link

    Should probably have proof-read that before sending it.
  • forserum - Thursday, August 1, 2013 - link

    LG_Monitor_Software_TCF_Ver2.7.8_SS_ver6.1.
    On lg site they told me it will get the latest firmware
  • jezzer - Tuesday, August 27, 2013 - link

    how to tell if it is a rev 1.25? anyone knows? thx
  • CDubbs - Friday, September 13, 2013 - link

    Has anyone seen benchmarks on the 29EA73 or 29EB73 coming out next week? Did they carry over the improvements from this model? It is being released at a lower price point and I am trying to determine where the compromises were made. Newegg has it on pre-order for 499 with a $50 store credit gift card.
  • arijit.ray81 - Wednesday, November 27, 2013 - link

    What's the version of DisplayPort on this? Is it 1.2?

Log in

Don't have an account? Sign up now