Zotac Z77-ITX WIFI In The Box

Zotac packages, in terms of dimensions, rarely go beyond the width and length of the motherboard itself – approximately 17cm x 17cm.  As such, all the additional gear has to be piled on top of the board.  In previous reviews of Zotac products, more often than not we do get a good selection in the box to play with.  In terms of the Z77-ITX WiFi, we get:

User Manual
Driver CD
Rear IO Shield
Four SATA Cables
Two WiFi Antenna
mDP to DP Connector
8-pin CPU Extension Cable
USB 3.0 Rear Bracket

For a mITX package, this is a substantial amount in the box – the four SATA cables take care of all the SATA connectivity on board, and the USB 3.0 bracket allows the onboard USB 3.0 header to be used in the event of no USB 3.0 in the case.  The mDP to DP cable is also beneficial such that users do not need to go out and purchase their own.  The 8-pin CPU power extension cable is rather a necessity given the location of the 8-pin CPU power port positioning.

Zotac Z77-ITX WiFi Software

Motherboard manufacturers can put similar hardware to each other on their products, but what separates the top tier from those chasing the pack is the software package on board.  At a bare minimum, we usually expect a form of fan control software and a BIOS update tool.  With a little more time and effort we may get a series of overclock options, and then we can spiral off into enhancements on current software or bring in more features as required.  Unfortunately Zotac falls down on all accounts, by virtue of the fact that there is no software. 

Starting with the install disk, we have no option to install all the drivers necessary for the board in one fail swoop.  Each option has to be selected individually – even the Intel drivers which have a switch that allows for a silent install. 

Under ‘Utility’ we get USB Charger, and while clicking this does install ‘software’, we get nothing in the way of an interface to tell us what it does or if it is working.  What amazes me with this package is that despite the use of Realtek NICs, we do not even get any Realtek ‘Network’ software included in the box in order to manage our network connections. 

It is hard to pinpoint the exact cause of the software issues.  Either the person in charge of making these decisions just is not aware of the competition, or more than likely there is not enough staff to make all the changes.  They could be too busy with new products to keep the company going, rather than build a strong foundation with which to build future products on.

Zotac Z77-ITX BIOS ASRock Z77E-ITX Overview, Visual Inspection, Board Features
Comments Locked

54 Comments

View All Comments

  • ryedizzel - Monday, December 31, 2012 - link

    Thank you so much for this Z77 roundup as I'm currently shopping for a new mobo and have been piecing together reviews from various sites. But as usual I always check here first, then Tom's, then Hardocp (in that order). Keep up the great work in 2013!
  • Aikouka - Monday, December 31, 2012 - link

    Ah, if only I held off on building my silent HTPC for a little bit longer. The hardest part about working with a Streacom case (other than building it) is finding a good motherboard that doesn't put too much in the way of the heat pipes. That's one reason why I was considering going with a board with mSATA, and I'm pretty certain that I stumbled across that ASRock board. Unfortunately, I looked at the photos, and didn't see a mSATA port, so I passed on it. Who would have thought to look at the back? Boy, do I feel like a bit of a dummy now! =$

    Although, speaking of the back mSATA connector, I recall seeing you touch on it on the recommendation page, but do you think it would work well on most cases? If I remember correctly, mSATA drives are fairly thin, so it might be fine. Going back to the Streacom, it does look like the ASRock offering would work well in regard to clearance even disregarding the mSATA port as the light gray SATA ports should clear the heat pipes. The USB3 port won't though.
  • philipma1957 - Monday, December 31, 2012 - link

    I built 2 asrock builds with the msata as the only drive. btw this z77 review with no regard to oc is pretty weird.

    I have a 3770k with a hd7970 gpu and an msata in a small case the cooler master elite it is a very fast powerful machine. I use the asrock and love it. it does have a flaw the msata slot is sata II
  • Ananke - Monday, December 31, 2012 - link

    I have i3-3225 (the same as in the article). In my opinion, for the money, the best is ASUS P8H77-I.
    It does have 6 SATA ports - a must for a file server. So, basically install Windows 8 on a SSD, add HDDs and create Storage Space - 5 SATA will allow you to create software RAID 5, without the need of SATA extension controller. BIOS is nice and stable. The board is $100 on Newegg.

    The ASUS Z77 Deluxe is nice, if anybody needs all the additional functionality in a small form factor. However, only 4 SATA - means no good for video, file, backup server. You get the "overclocking" ability though. I doubt how practical is overclocking into so small space, probably to a handful of people. Teh board costs $185.

    So, I would say $100 is better than $185, plus you get all the 6 SATA ports - priceless.
  • DarkStryke - Monday, December 31, 2012 - link

    Not everyone who games wants to have a huge tower. I've built more then one system based around the silverstone FT03-mini that runs a 3750k / Z77 deluxe-i and a GTX 670.

    I bring mine to lan parties and people are amazed at the power in such a small box, and it's just as fast as any desktop single GPU alternative.
  • Ananke - Monday, December 31, 2012 - link

    ASUS P8H77-I is a mini ITX board - the cheaper variant of the reviewed deluxe board. It costs $100.
  • ggathagan - Wednesday, January 2, 2013 - link

    I agree; the H77 makes much more sense for most ITX builds.
    I built a system with the P8H77-I, a GTX670 and the FT03-MINI.

    I don't think the daughter card of the Z77 Deluxe would have fit in the case.
  • tramways - Monday, December 31, 2012 - link

    I registered here because the reviewer is lamenting that some boards use the ALC889 instead of the ALC892 codecs.
    The 889 like the 882 before it and the 898 after it is a much better codec than the 892.
    The 883,888,892 codecs are the cheaper low performance DAC/ADC chips.
    I would buy a board with the ALC889 or preferably the ALC898,but not with the ALC892.
    all the best in 2013
    Paul
  • limki - Monday, December 31, 2012 - link

    too bad I already ordered mine last week ... MSI Z77IA
    to tell the truth, i don't really mind [ at 136€ its a bit pricier than asrock with my supplier]
    the conclusion for this board seems a bit biased to me
    but hey, if you're not looking for a tiny powerhouse, you don't need z77
    - in SUGO 05(and most small cases), MB is horizontally and PSU is above it, so cables and airflow will always be nasty
    - using a discrete GPU, you don't care about not having DVI or DP
    - no additional controller (USB/SATA) -> I don't plan on using more than 2(won't fit into case), so why bother?
    //btw is the SATA 6/3/m correct 2+2? shouldn't be also 2+2+1?
    - and if I'm to take the "military grade" stuff at least half seriously, ...
  • EnzoFX - Monday, December 31, 2012 - link

    Do the post times include those pesky AHCI driver loading screen? I hate that it adds so much more to the boot process.

Log in

Don't have an account? Sign up now