For just over a week, I’ve been using two phones interchangeably. The first is the Lava Xolo X900 with Medfield inside, the second is the flagship of HTC’s new One series, the HTC One X on AT&T. It’s a device with lofty goals, as it’s the flagship of HTC’s new branding and strategic positioning behind a single line of devices, industrial design, and focus. The strategy mirrors that of Samsung’s with their Galaxy series, and if successful will rekindle the excitement behind HTC’s brand.

The One X on AT&T is really a One XL (L for LTE), however in the USA the device carries full One X branding. We’ve got the International One X and One S variants which will be reviewed in short order, but for today we’re talking specifically about the One X on AT&T.

The One X is without doubt unlike any other HTC smartphone I’ve held to date. In fact, it’s a testament to how revised HTC’s industrial design is that I can even write that sentence. The phone is machined, not injection molded, from a single machined piece of polycarbonate plastic, and feels anything but cheap in the palm. If Nokia was really the first to demonstrate that you can have a polymer (read: plastic) device without making it feel second rate, HTC is the second OEM to do it properly. Probably the biggest part of that effort is giving the surface a proper texture. In this case the HTC One X backside is given a sand blasting for texture, while the sides remain slick with a piano finish gloss. It’s a great juxtaposition of textures that makes it easy to identify proper grip, and likewise break any homogenaity.

The buttons blend into the glossy sides of the One X, getting pretty close to the optimal combination of protrusion and clickiness. The power/standby button at top is no exception. Speaking of the top, there’s a secondary microphone for noise cancelation, headset jack, and finally the microSIM tray, which requires an ejector tool (provided in the box) like many other newer designs.

The case is again a single piece unibody construction. With exception of the microSIM tray, there are virtually no doors or covers, and the consequence is no flex, creaking, or chattering seams when the vibration motor is going. The speakerphone grille at the back and the earpiece at front are both arrays of pinholes no doubt cut with a laser through the polycarbonate. On the front, the notification LED (which shines green or amber) shines through one of the small holes. The only unfortunate part of this is that it’s hard to see the notification LED from extreme angles. At far right is the 1.3 MP front facing camera.

HTC has opted to place the microUSB port about one quarter of the way down on the left side of the phone. The result is that it’s possible to hold the device in portrait and type like normal without the cable poking into your hand. I also suspect that HTC has placed the majority of the PCB up top, and left the bottom three quarters of the device for the internal battery.

The rear of the device is again a softly textured finish. Our HTC One X is a dark, almost black color, but there’s also a white version as well. The white revision indubitably hides scuffing better than our black unit, though so far loss of texture at the contact points on the One X has been minimal. The surface roughness from HTC's bead/sand blasting is very high frequency, which is what makes it somewhat prone to appearing shiny after rubbing on planar surfaces. Interestingly enough I noticed that Nokia moved to a lower frequency surface texture on the Lumia 900 to combat this. I'm sure we'll eventually see HTC do something similar eventually. That said again the scuffing is minor.

There are five pogo pads at right for using a dock or accessory. I’m not sure whether the HTC Car Kit uses these pogo pins, but we’ve seen HTC and other OEMs use these for audio, power, and USB data signaling before. The camera module bulges out gently from the top center with a single LED flash at right.

The obvious mainstay of the One X is the 4.7" 720p infinity display which has a gentle curve at the left and right edges. The display isn’t curved, however the overall design makes it almost feel that way. Up top, HTC has done an excellent job hiding the ambient light and proximity sensor. I can spot the ambient light sensor, but it’s subtle, and I have no idea where the proximity sensor is, which is awesome. At bottom are the three capacitive buttons, which means the menu button becomes part of the UI for legacy applications that haven’t fully integrated it yet. I have no complaints with the capacitive buttons, this is something that has long since been completely settled and squared away. They’re backlit as well if the ambient brightness level is low enough. The result is even more vertical real estate than the Galaxy Nexus’ 720p display provides.

Overall I can’t understate how great the One X feels as a whole. It’s a new type of minimalism for the handset maker - mature, less chintzy and flashy like so many other Android devices. My only gripe is that the black color shows scuffs and loss of texture (from rubbing other solid surfaces at the contact points) more than I’d like - the white model probably makes more sense purely because I can’t imagine that showing.

What’s really interesting to me is just how many recent handsets from so many other OEMs have taken a similar design approach - microSIM, unibody polymer construction, no microSD card slot, and non removable battery. That combination of features seems necessary if you’re going to craft a device with competitive form factor this generation, and no doubt even more vendors will update with that profile. Polymer makes sense because it’s both a material transparent to RF, and easy to machine, and going with a microSIM makes sense since it’s all about minimizing area that isn’t dedicated to battery.

Next up is our specifications table. Again the chief differentiator between AT&T’s One XL turned One X is that the device has a Qualcomm Snapdragon S4 MSM8960 SoC, this is the first 28nm dual core Krait based part, and marks our first smartphone with it inside. The two krait cores are clocked at up to 1.5 GHz, and MSM8960 includes Adreno 225 graphics. The AT&T One X also includes 16 GB of onboard storage, and again there’s no microSD card expansion option.

Physical Comparison
  Apple iPhone 4S Samsung Galaxy S 2 Samsung Galaxy Nexus (GSM/UMTS) HTC One X (AT&T)
Height 115.2 mm (4.5") 125.3 mm (4.93") 135.5 mm (5.33") 134.8 mm (5.31")
Width 58.6 mm (2.31") 66.1 mm (2.60") 67.94 mm (2.67) 69.9 mm (2.75")
Depth 9.3 mm ( 0.37") 8.49 mm (0.33") 8.94 mm (0.35") 8.9 mm (0.35")
Weight 140 g (4.9 oz) 115 g (4.06 oz) 135 g (4.8 oz) 129 g (4.6 oz)
CPU Apple A5 @ ~800MHz Dual Core Cortex A9 1.2 GHz Exynos 4210 Dual Core Cortex A9 1.2 GHz Dual Core Cortex-A9 OMAP 4460 1.5 GHz Dual Core Qualcomm Snapdragon MSM8960
GPU PowerVR SGX 543MP2 ARM Mali-400 PowerVR SGX 540 @ 304 MHz Adreno 225
RAM 512MB LPDDR2-800 1 GB LPDDR2 1 GB LPDDR2 1 GB LPDDR2
NAND 16GB, 32GB or 64GB integrated 16 GB NAND with up to 32 GB microSD 16 GB NAND 16 GB NAND
Camera 8 MP with LED Flash, Front Facing Camera 8 MP AF/LED flash, 2 MP front facing 5 MP with AF/LED Flash, 1.3 MP front facing 8 MP with AF/LED Flash, 1.3 MP front facing
Screen 3.5" 640 x 960 LED backlit LCD 4.27" 800 x 480 SAMOLED+ 4.65" 1280x720 SAMOLED HD 4.7" 1280 x 720 LCD-TFT
Battery Internal 5.3 Whr Removable 6.11 Whr Removable 6.48 Whr Internal 6.66 Whr

To be totally honest, I always found the Sensation’s industrial design to be world class, it was a few other devices with carrier influence that showed definite drift away from HTC’s unique vision. Keeping that from happening with the One series should be the next big concern for HTC.

Software - ICS with Sense 4
POST A COMMENT

137 Comments

View All Comments

  • metafor - Wednesday, May 02, 2012 - link

    His point is that blacks on an LCD require far more power than on an AMOLED. Since a black pixel on an AMOLED = no power used.

    I'm curious as to how the power consumption of a fully white AMOLED screen of equal pixel density and screen size compares to that of an LCD -- at equal brightness of course. This actually shouldn't be very difficult to test and really would be nice in one of these reviews.

    Take the Galaxy Nexus or the upcoming GS3 and the One X, turn off everything (airplane mode, kill all background processes) and disable auto-lock/auto-dim. Turn the screen to various levels of brightness while displaying a pure white screen (several apps will do this).

    Then see how long the phone takes to go from 100% battery to 0%. Extrapolate based on how large the battery is in WH rating.

    Then compare the two.
    Reply
  • Lucian Armasu - Saturday, May 12, 2012 - link

    Which is why I find it very weird that Samsung didn't go with a more stock ICS dark look for their Galaxy S3. ICS feels like it was made for AMOLED displays, and yet Samsung refuses to use it. Shame. Reply
  • ilkhan - Tuesday, May 01, 2012 - link

    I stopped reading at this line:
    "however the device does not work with T-Mobile WCDMA and the One XL page lists the correct air interface support."
    The rest of it was totally irrelevant after that.
    Pity. That screen has been getting tons of praise.
    Maybe the OneX2 will include a proper GPU and TMo support.
    Reply
  • ilkhan - Tuesday, May 01, 2012 - link

    (no edits?)
    It was already borderline without a replaceable battery and without an mSD slot. The frequency support just closes the book for sure.

    Which really is a pity. The android phones first got started by word of mouth "expandable storage, easy to hack, total control, function over form", the antithesis of apple. Now they are racing to embrace all the bullshit that apple did 5 years ago. We don't need 7mm thick phones. Gimme the extra 2 extra mm of thickness if it means I get an mSD slot and replaceable larger battery, I'll be happier that way.
    Reply
  • metafor - Tuesday, May 01, 2012 - link

    Having come from a Sensation to a One S, I gotta say, I love the 7mm thin factor over almost everything else (the weight too). With dropbox and Google music, most of my needs for large storage has been eliminated. Reply
  • ImSpartacus - Tuesday, May 01, 2012 - link

    Just wait. When the market goes far enough in one direction, it opens up a niche market in the other direction.

    You might end up having to use a developer device or something like that, but you'll get your wish.
    Reply
  • Zoomer - Wednesday, May 02, 2012 - link

    I would like my 4 hardware buttons too. microSIM I suppose is acceptable, though the use of a special tool for access is not.

    So:
    AMOLED
    microSD
    Physical Buttons
    Trackball
    Swappable batteries would be a plus, if only for easier debugging / full off.
    Reply
  • Zoomer - Wednesday, May 02, 2012 - link

    Oh almost forgot, HTC branding on the top of the glass. HTC's the manufacturer, NOT AT&T. AT&T is just pipe. ;) Reply
  • kmmatney - Wednesday, May 02, 2012 - link

    You can always get an external USB battery to use an an extra battery (and it can charge other things to). Reply
  • sprockkets - Tuesday, May 01, 2012 - link

    That's why they make the One S. Shame that has to be the case, but you might like the metal case better. I wish I could open it like the sensation though. Reply

Log in

Don't have an account? Sign up now