Toshiba Portege R835: Less Ultra, More Notebook
by Dustin Sklavos on March 30, 2012 11:35 AM EST- Posted in
- Laptops
- Intel
- Toshiba
- Sandy Bridge
- Notebooks
System Performance
Essentially what we're dealing with when we look at the Toshiba Portege R835's full voltage mobile processor is just how much performance an ultrabook sacrifices to hit that 17W TDP on the CPU. There's more to it than that, but there are also potentially some interesting wrinkles going on with the Intel Core i5-2450M in the R835 that may manifest themselves.
The PCMarks are always going to skew wildly towards any system that enjoys an SSD, so the bottom shelf 5400RPM hard drive in the Portege R835 isn't doing it any favors here. Let's see what happens when we shift performance squarely to the CPU.
The i5-2450M pulls off an impressive run, demonstrating that there's still a notable difference between a low voltage and a standard voltage chip. The R700's last-generation processor is soundly beaten by this generation's low voltage chips, the turbo-less i3-2367M excluded.
Without DirectX 11 support, Sandy Bridge graphics can't run 3DMark11, but 3DMarks Vantage and 06 demonstrate the importance of both having a faster processor and a faster IGP core. You're not going to be running wild in Battlefield 3 on the Portege R835, but nerds like me can still enjoy games like Magic: the Gathering - Duels of the Planeswalkers 2012 on the IGP.
Facebook
Twitter
RSS
81 Comments
View All Comments
damianrobertjones - Saturday, March 31, 2012 - link
"I think you guys pay too much attention to the high end. Maybe you should start doing reviews on more mainstream models that people actually BUY"+1. The site might get a whole new flood of people paying a visit. I don;t know five people that would even THINK about spending over £600 on a laptop as it's ALL around the basement price.
SongEmu - Saturday, March 31, 2012 - link
If you're in the market for a super cheap notebook, you're probably not an Anandtech regular. And even if you are, you're not reading reviews on your craptop. You're typically ticking off check boxes, i.e.:dual core proc
DVD drive
HDD > 120 GB
X inch monitor.
Done.
There is nothing exciting under $600. not for notebooks.
ScottHavens - Friday, March 30, 2012 - link
I saw the resolution was only 1366x768 on a 13.3" display and just skipped the rest.ScottHavens - Friday, March 30, 2012 - link
I gave in and read the rest of the review; I see that my complaint has been addressed by the author. When will it get addressed by the manufacturers?rudolphna - Friday, March 30, 2012 - link
Such snobs people are anymore. So this is basically the same thing as my previous post, but did you not realize that 99% of laptops sold to actual normal consumers are 1366x768, both in 14" and 15.6" versions? At the price point, maybe you should not complain. And seriously? 768 in a 13.3" screen isn't good enough? My my my.welshy992 - Friday, March 30, 2012 - link
768p in a 15.6 inch screen is really bad. You can't do anything useful with that. The resolution is so cramped. You can't even open an entire word document or a web page without always having to scroll. Did you not realize that 99% of laptops sold USED to have a higher vertical resolution than 768p?If all you do on your laptop is Facebook, watch movies, and play games, then yes 768p in a 15.6 inch form factor is fine. For spreadsheets, coding, word docs, or any other form of content creation it is not worth it. I'd rather chain myself to a desk with an external monitor like I'm doing right now.
Coup27 - Friday, March 30, 2012 - link
rudolphna this is quite clearly a enthusiasts website by enthusiasts. The people who walk into bestbuy and buy a $400 laptop with a 1366x768 TN LCD with a 5,400rpm HDD and think it's great because they have no knowledge to say otherwise. These people will also not be reading Anandtech. I don't want Anandtech to read like a BBC Technology review or equivilent.I also disagree with you on another point. Long before SSDs we had to accept the performance from a 5400rpm HDD. Now, it's quite clear that this performance for any user who knows how to use a laptop to its potential, is crap.
rudolphna - Friday, March 30, 2012 - link
Well considering that I AM an enthusiast, and I have a desktop using Anandtech recommended components (2500k, P8Z68-V Pro, Crucial M4, Fractal Design Define R3 etc) I understand the point of view. However there are enthusiasts like me, that don't need or want a high end laptop.My aforementioned laptop IS 768p, and I can do everything you just mentioned, perfectly fine. Sure I have to scroll. That's not really a big deal to me. Well, except coding.
Anandtech does reviews of low end PSUs, and laptops with A6s, etc. But they do the most expensive ones they can find. Anandtech may be an enthusiast site, but it wouldn't hurt to do a mainstream review every now and again.
YES the SSD is fast. But for what I need my laptop to do, I don't NEED one. Nor do 99% of people who buy laptops who the most intensive thing they will do is facebook games. If you keep your laptop clean and running light, as I do, I have no problems with a standard 5,400RPM drive. Granted, I'm pretty sure that Western Digitals 5400RPM drives are faster than Toshiba and Hitachis, but that' s beside the point.
steven75 - Friday, March 30, 2012 - link
If you're happy with a junky, poor performing laptop, more power to you. But don't expect most enthusiasts to agree with you. It's odd that you think they will.TrackSmart - Friday, March 30, 2012 - link
I respectfully disagree. I personally don't need to see lots of reviews of the cookie-cutter $400 laptops you describe. Maybe one or two examples per year, just to set the benchmark for what you get for that price point. If one of them breaks the mold in an important way, then yes, review it. But otherwise, why bother? I can describe most of them to you already.That's not snobbery. I also agree that these $400 laptops it will do everything that the average person needs to do. But they occupy a part of the market where there profits are so low that there is little room for differentiation between models.