The ASRock CoreHT 252B scored full marks in our streamer test suite. However, this was not without extensive tinkering around with respect to codecs and splitters. One of the irksome issues with respect to Intel HD Graphics is that the drivers do not play well with the open source DXVA video decoders. Because of this, the native MPC Video Decoder and XBMC's DXVA2 acceleration are simply unusable on Intel GPU based systems.

In this section, I will outline the steps taken to get a working stable-XBMC-build based setup on a CoreHT 252B running Windows 7. The aim of this section is to get the following:

  • Retain XBMC UI for navigation and playback as much as possible
  • Play Blu-ray ISOs and discs through XBMC
  • Get hardware acceleration for all possible video codecs
  • Utilize bitstreaming capability for HD audio
  • Match display refresh rate to video frame rate

Achieving the above requires the following mix of open source and commercial software:

  1. ArcSoft Total Media Theater 5 with the checkactivate.dll hack (from Step 2 in this post).
  2. Virtual CloneDrive
  3. Latest stable build of MPC-HC
  4. Latest version of LAV Filters
  5. Latest stable version of XBMC

Since Intel's GPU drivers don't work properly with XBMC's native DXVA acceleration, we are forced to use MPC-HC as an external player. However, MPC-HC's default DXVA codecs also don't work. I have also found that the internal splitters of MPC-HC are not as bug-free as the LAV Splitter.

Setting up MPC-HC

  • Install LAV Splitter and accept all the default settings
  • Install LAV Audio Decoder and configure the codecs you want to bitstream
  • Install MPC-HC and import the registry settings available here, which will configure MPC-HC as follows (in order)
    • Prefer Microsoft DTV-DVD Decoder (for MPEG-2 and H.264 DXVA acceleration)
    • Prefer ArcSoft Video Decoder (for both progressive and interlaced VC-1 DXVA decode)
    • Prefer LAV Splitter
    • Prefer LAV Audio Decoder
    • The corresponding internal filters are obviously disabled
  • Note that the registry settings don't set the auto refresh rate feature. Fiddle around with the MPC-HC settings in a manner suitable for your setup.

After the above steps, you should be able to get any media file (H.264 / MPEG-2 / VC-1) to play back properly through MPC-HC.

Configuring Blu-ray Playback

Assuming that Virtual CloneDrive and ArcSoft TMT5 are installed in the default locations, you will just need to extract the batch files in the For_XBMC folder inside the archive here. The For_XBMC folder can be extracted to, say, C:\For_XBMC. The latest build of ArcSoft TMT5 already has auto refresh rate enabled.

The next step is to get XBMC to use these external players.

Using MPC-HC and ArcSoft TMT5 inside XBMC

XBMC's software decode works very well for Real Media, MPEG-4 and other streams for which GPU decode acceleration is not available. After installing XBMC, we need to place the playercorefactory.xml (part of the archive here  in "C:\Users\${UserName}\AppData\Roaming\XBMC\userdata". Alternatively, you could just back up the original playercorefactory.xml in "C:\Program Files (x86)\XBMC\system" (assuming you are the only XBMC user in the system) and replace it with the downloaded XML file.

There are lots of resources online about this topic . Of particular relevance to the setup described above are this AVForums post and this AVSForum post.

With the above setup, you should be able to stream videos and watch Blu-ray discs and ISOs without leaving the XBMC UI. The only downside is that you lose the fancy Video OSD during playback, but that is the price you will need to pay with an Intel GPU based system if you want hardware decode and stable HD audio bitstreaming from within XBMC right now.

Cadence Detection and Deinterlacing Miscellaneous Concerns
POST A COMMENT

54 Comments

View All Comments

  • glypto - Wednesday, September 07, 2011 - link

    "if you are a stickler for image and video quality, go with AMD, and if you want the best of freeware / open source software to do the work for you, go with NVIDIA"

    Ganeshts, what system would you recommend for Linux + XBMC then ?
    Reply
  • Penti - Wednesday, September 07, 2011 - link

    I none integrated solution would be my suggestion. But pure XBMC machine you would probably get by with ION-NG or the like. But for a moment disregarding that. You can't get a decent CPU (still some need for software decoding, or transcoding) and a decent GPU (that can do video decoding and postprocessing or well drivers to handle OGL and VDPAU in XBMX/Linux case, as well as audio properly) otherwise. I'm sure Ganesh can agree on that point.

    That means that there are a lot of options and combinations as well as cases, sizes and so on. But don't expect stuff to be trouble free anywhere when it comes to stuff like this.
    Reply
  • Googer - Thursday, September 08, 2011 - link

    I think hitachi cinemastar hard drives might have been a better pick due to their claim of quieter, lower power, and 24/7 operating abilities. Reply
  • Googer - Thursday, September 08, 2011 - link

    The lack of a TUNER or CABLEcard Slot or even a free pci-e slot for DVR use makes this HTPC a tad less appealing. Reply

Log in

Don't have an account? Sign up now