Dell U2711 - Near Professional Quality at a Pro-Am Price

If you're a professional image or video editor, it's possible that the U2711 will fall a bit short. Specifically, we've seen better color accuracy, especially after calibration. For the price, we'd recommend looking at HP's LP3065, or one of the other 30" S-IPS displays. However, the U2711 does win out in quite a few areas. If you want a fine dot pitch, there's no better desktop LCD right now. The U2711 also supports 30-bit deep color with 12-bit internal processing; most displays with 30-bit color output cost twice as much! Look at the HP DreamColor LP2480zx for example: $1800 online and it's a 24" 1920x1200 LCD. (Note that we haven't tested that particular LCD; for the price we would hope color accuracy is better than the U2711, but we can't say for sure.)

Since the U2711 uses an IPS panel, viewing angles are a non-issue. Off-angle viewing isn't perfect, but it's far better than what you get from any TN panel and as good as any LCD on the market. Color quality and accuracy on IPS panels are also very good, and given the various compromises you can make we feel IPS is the best overall solution for LCDs right now. Very likely we won't get anything better until OLEDs, SEDs, or some other display technology takes over, and right now the cost of larger OLED solutions is prohibitively high.

Another great feature on the U2711 is the large number of video input options. HDMI, DisplayPort, and two dual-link DVI connections will be the preferred method of connecting, but you can also use VGA, component, or composite video. The ability to handle lower resolutions very well is a definite plus, though with a decent GPU you can often let the graphics chip do the scaling and not worry about shortcomings in the LCD's scaler. The problem with LCD scalers is that they also add a bit of latency. We don't know how much, but we do know that the U2711 has about 15ms more latency than other IPS displays that we've tested in the past. The latency may also come from the 12-bit internal color processing, but that would be part of the scaling hardware. Having seven different video inputs is going to be overkill for just about every potential user, but we could certainly see situations where using two or three of the inputs is feasible, e.g. PC, HDTV, and gaming console. The U2711 supports an optional audio bar along with audio out, but in either case you'll be limited to 2-channel audio, so you might want to look somewhere else for an ideal home theater display.


Aspiring imaging or video professional looking for a capable display will find the U2711 is a great option. We've seen better color accuracy, true, but few displays offer out-of-box colors that are anywhere close to this good. Dell guarantees every U2711 will have a Delta E of less than 5.0 without any extra calibration, and our test unit delivered an extremely good result of 2.24 (average Delta E). Buying a separate colorimeter and software will set you back another $200-$300, though you could then use just about any IPS or PVA LCD. The U2711 also delivered very good color uniformity. I still like the larger 30" LCDs, but then I have access to a colorimeter, I only need one video input, and I prefer a larger dot pitch.

We suspect "true" professionals will still prefer more expensive solutions that can achieve a Delta E of less than 2.0 for every color patch, but that's a very small market. If you're wondering if you might notice the colors where the U2711 "only" scores ~4.0, then you likely don't need to worry about it. In fact, we think most professionals would only "see" the problem if they had access to a colorimeter; you really won't notice any problems with the uncalibrated results using your naked eye.


Bottom line is that if you're looking for a large LCD with lots of features, a high resolution, great colors, and what we feel is the best current LCD panel technology, the Dell U2711 should be at the top of your list. $1050 isn't chump change by any stretch of the imagination, but you won't find quality like this in a sub-$500 LCD. In fact, the only real competition right now comes from the 30" S-IPS panels that have been around for several years. If you want something a little smaller, or if you have a need for 30-bit color support, the U2711 is a better buy than anything else currently on the market. This is a great high resolution display that delivers on the quality and features fronts, and we're pleased to award the Dell U2711 our Gold Editors' Choice award.

Resolution Support and OSD
Comments Locked

153 Comments

View All Comments

  • ninjackn - Friday, January 22, 2010 - link

    The color gamut issues stems from issues with applications not using ICC profiles. It was a huge problem in windows XP because so few applications cared to use color profiles. It's gotten a lot better with windows vista/7 (or with OSX) but it still pops up from time to time, specifically with all those images on the web missing color information.

    Here's a website that shows what i'm talking about:
    http://www.gballard.net/psd/go_live_page_profile/e...">http://www.gballard.net/psd/go_live_page_profile/e...

  • JarredWalton - Friday, January 22, 2010 - link

    Okay, I read through that, tried it on Firefox 3.5.7, IE8, and Safari 4. I get the problem now... it's not having a wide color gamut LCD, but rather viewing images that have an ICC profile in applications that don't respect those profiles, right?

    In terms of internet publishing, I'd have to agree that we need to standardize, and since sRGB is already the standard there's no point in going elsewhere. For an imaging professional where the content isn't going on the web, though, wouldn't you want the better color space? I always "save for web" if I'm going to post an image online, and that strips out any ICC profile information (AFAIK).

    I need to go play with this on the U2711 with and without a monitor profile (and using sRGB and Adobe RGB) to see what effect - if any - it has on the experience. Stay tuned....
  • CSMR - Friday, January 22, 2010 - link

    Save for web should give an sRGB label and does with Photoshop CS3. No point in stipping it out.
    FF is color managed. As soon as IE becomes color-managed it will be fine to use any color spaces in web images. Microsoft has been fairly good about color management of late, so hopefully in IE9, fingers crossed.
  • velis - Friday, January 22, 2010 - link

    To me, this monitor is more interesting from a different viewpoint:
    It's one of the rare few monitors that offer 2560 resolution at less than 30" size. And even this one only has 109 DPI resolution.
    If this monitor was 22 - 24" in size, I'd buy it without second thought.
    Of course you need to run Word at 150% magnification, but the fonts look just awesome with so many pixels available to render them. Not to mention games. A "fairly powerful" graphics card is needed though.
    The only problem is that current display managers, be it Windows or Linux are all still raster ones and can't really adapt well to increased DPI displays.
    Perhaps if more monitors like this would show up on the market, MS and Linux gurus would finally develop true vector user interfaces. Then we could have 150, 200 and even more DPI displays. I'm wondering how many more years before displays catch up to what printers had some 20 years ago already.
  • CSMR - Friday, January 22, 2010 - link

    High dpi is very useable, even with normal pixel pitches 120dpi can be a good option. But yes vector graphics would make the benefit of higher dpi displays even greater.
    There is vector support in WPF since Vista so Windows is getting there at least.
    Plus modern applications (including OS) tend to have raster graphics at various dpis, I think often including 150, so that is improving even without vector graphics.

    But the fact is most people don't need very high dpi so we have to wait for the cost to come down. Also for displayport to become common once dvi reaches its limit and that will take a while.
  • dasgib - Friday, January 22, 2010 - link

    I'm really curious about to know if the matte displays of the U2711 has the known "anti-glare effect" which many people complain about on 24" IPS monitors (like the HP LP2475w and Dell U2410)?

    I don't like glossy displays (as most people do), but I had to send the stated HP display back because of that anti-glare effect.
  • MadMan007 - Friday, January 22, 2010 - link

    I have the HP and it's not bad as far as anti-glare coating although not the best I've seen - that would be a Samsung but sadly it was TN. It helps to sit a reasonable distance away, like a mere 2 feet or more. Every single Dell I've seen is far worse in terms of grainy anti-glare which is a shame because it means I can't consider Dell monitors at all, it just drives me too crazy to see whites all sandy-sparkly-grainy. It really makes me wonder how more Dell users don't even notice it at all.

    Maybe they've gotten better though? I'd sure like to know.
  • dasgib - Friday, January 22, 2010 - link

    I just asked Jarred about this via email. Hopefully we get an answer soon :)
  • JarredWalton - Friday, January 22, 2010 - link

    I haven't noticed any negative effects from the anti-glare coating. I use a Dell 3007WFP normally and haven't ever noticed a problem there either. Mostly, I see the "grainy effect" on cheap TN panels, but maybe I'm just one of those people that isn't bothered by what you're referring to. Anyway, FWIW I feel the U2711 has the same appearance as the 3007WFP and I enjoy the picture. I don't notice "more graininess" or anything like that.
  • MadMan007 - Friday, January 22, 2010 - link

    There may be some confusion here over the word 'graininess.' It is not a screen-door effect, pixel pitch by-product or defect in the actual image. It is the screen coating itself - it's not 'grainy' per se in the way a film might be grainy, it's 'sparkly' is my best word for it. Another way to describe it is if you took some sand and lightly dusted the screen surface with it - the image itself looks fine but there's always this layer above it that has its own effect on the image. It makes things 'sparkly' -tiny random dots of coloration across the specturm. For some people it may blend together, I don't know, but I can't see how it's possible to miss entirely. Dell's anti-glare is known to be heavby and particularly prone to this effect which is why it's brought up. Check out forum threads about Dell monitors and you'll find plenty of people noting it.

    Now someone who uses a Dell monitor all the time may get used to it especially if they never have another monitor next to it. But Jarred you surely have seen a variety of screens. Have you ever set them up side-by-side with your Dell? What about a laptop screen if you have one? Or if you have access to a glossy screen at least to compare, they by nature will not have any anti-glare coating problem.

Log in

Don't have an account? Sign up now