Gaming Performance

Gaming Performance - Battlefield 2

Gaming Performance - F.E.A.R.

Gaming Performance - Half Life 2

Gaming Performance - Quake 4

Gaming Performance - Serious Sam II

Gaming Performance - Splinter Cell Chaos Theory

The overall gaming performance of all three platforms with the Pentium D 805 is actually decent considering the processor speed, memory bandwidth, and heavy reliance upon the video card to generate these scores. As in the synthetic tests, the higher memory settings on the Abit board have a detrimental effect on our gaming scores. The Abit and Asus boards at the same memory settings are basically equal in these benchmarks which shows that memory performance can make a difference (however slight) in your gaming experience.

Encoding and Compression Performance Final Words
Comments Locked

33 Comments

View All Comments

  • CYBERX1800XT - Thursday, July 6, 2006 - link

    it's going to take alot to convince me that abit's quality in electroitics(resistors,capicitors,pnp transistors and voltage regulators) hasn't overshadowed there so-called new make over. all i have to say is 'anyone remember the abit be-6 revision 2?? i do,,i also remember 12 hours after buying an abit mobo,,at least 14 caps literally blew up. so all this halla-ballhooey about the product line refreshment may just be hype. i'm not scowling at anyone at anandtech,,i believe and trust there reviews. who i don't trust is abit's choice in 2nd or 3rd rate electroitics. besides,,who cares,,this is a rather whimpy board. for the cost of this mobo,,you could easily spend 20 more bucks and get a ASUS A8R-MVP,,and have crossfire to boot. i'm sorry to sound so negative,,but abit left a bad taste in my mouth in 2000. and it has yet to have left. i honestly apologize to everyone at anandtech. not demeaning any of you guys,i totally trust your revievs. but i switched to amd,,and i only bought 1 abit board. and that will never happen again. i will ONLY use ASUS!!!
  • araczynski - Wednesday, July 5, 2006 - link

    personally i find the inclusion of onboard audio on ALL motherboards to be quite the waste of consumer dollars. what kind of an "enthusiast" puts up with onboard audio? granted its more then fine for windows, but when you're aiming a mobo at an enthusiast you don't have to make him pay for some crappy soundchip that he'll never do more with then disable in the bios.

    and yes, get rid of the floppy connector (usb version for those that can't live without them).
  • Pirks - Wednesday, July 5, 2006 - link

    quote:

    personally i find the inclusion of onboard audio on ALL motherboards to be quite the waste of consumer dollars
    Not quite that simple - it's actually cheaper to make mobos with audio than without it. With audio you have one manufacturing line cranking out mobos, just one model => CHEAP. If you wanna get mobos w/o audio, you gonna get TWO manufacturing lines cranking out mobos => EXPENSIVE. This is why they always produce only ONE SINGLE MOBO MODEL, EVERYTHING INCLUDED - all the floppy and legacy crap - 'cause that's CHEAP. You go to options, exclude this, exclude that blah blah - and the price -wooosh!- soars up to clouds and the blue sky :)
  • bob4432 - Wednesday, July 5, 2006 - link

    glad to see a floppy is still around. i am probably the only person that uses one, but i appreciatet the m/b manf for taking me into consideration :D
  • afrodite - Tuesday, July 4, 2006 - link

    Say what!?!

    The problem here is the boneheaded optical drive manufacturers not using SATA on their drives, not Intel removing obsolete technology.

    I say:
    Get rid of PATA
    Get rid of Floppy-drives
    Get rid of mouse and keyboard ports

    Then use all that lovely real estate on the board to put a digital tv receiver or bluetooth-module or wifi or firewire or just more USB-slots or whatever you want..

    Please, what year is it now, 2006 or 1996.. floppydrive connectors on a "next-gen motherboard"??
  • mine - Saturday, July 8, 2006 - link

    second that

    iwhat about the following scenario.... you will never forget that :

    3 young Mac videoeditors rolling on the floor with wet trousers looking @ a Windows XP install with an open case
    an attached floppy and F6

    these people have never seen a floppy in their whole life and these things are one click away on Mac OS X
  • Pirks - Tuesday, July 4, 2006 - link

    quote:

    I say: Get rid of PATA Get rid of Floppy-drives Get rid of mouse and keyboard ports Then use all that lovely real estate on the board to put a digital tv receiver or bluetooth-module or wifi or firewire or just more USB-slots or whatever you want.
    Hmm, why this smells like a Mac? ;)
  • JarredWalton - Tuesday, July 4, 2006 - link

    Until we have the replacements ready, completely removing support for older technologies is jumping the gun. We need a next-generation operating system that doesn't ever require a floppy drive (which we will get with Windows Vista). More importantly, we need SATA optical drives that are at least as good as the PATA counterparts, and with equivalent prices. Right now, I'm only aware of one company making SATA DVDR drives (Plextor), and the consensus seems to be that the drives aren't all that great. Widespread support for SATA optical drives (meaning software support -- what good is a DVDR if your favorite burning application doesn't support it?) is still lacking.

    The end result is that every motherboard manufacturer that uses ICH8 is pretty much forced to include another chip on the motherboard to handle IDE support. Intel isn't getting rid of IDE support; they're just placing the burden of including such support on the motherboard manufacturers. Seriously, how many transistors does it take to support IDE? Perhaps the reason it was removed was to reduce pin counts on the Southbridge, but I doubt it. We're not even asking for anything special in terms of IDE support; just include the same old IDE support that has been present on motherboards for the past decade or so.
  • jonp - Monday, July 3, 2006 - link

    quote:

    We utilized the stock heatsink/fan in our normal testing but also verified a couple of larger Socket-775 cooling solutions would fit in this area during our overclocking tests.

    quote:

    Cooling: Zalman CNPS9500


    Is the Zalman unit "stock"?
  • Gary Key - Monday, July 3, 2006 - link

    We used the stock retail heatsink for all testing except overclocking. We use the Zalman for overclocking and also tried the Tuniq 120 for fitment issues.

Log in

Don't have an account? Sign up now