Gaming Performance: Source Engine

With Half-Life 2: Episode One ready for launch in the next week, Lost Coast performance may become far more important. Episode One will also make use of the new HDR lighting and improved graphics along with game play being more than one short level. We tested with HDR enabled, all detail settings at high, and 8xAF. We also ran benchmarks at identical settings using Day of Defeat: Source.

Gaming Performance - Day of Defeat: Source


Gaming Performance - Day of Defeat: Source


Gaming Performance - Day of Defeat: Source


Gaming Performance - Half-Life 2: Lost Coast


Gaming Performance - Half-Life 2: Lost Coast


Gaming Performance - Half-Life 2: Lost Coast


The X1400 almost manages to reach playable frame rates... almost. Meanwhile, the M1710 has become CPU limited at the lower resolutions when we don't have 4xAA enabled. Unlike some of the other games, the 7800 chip struggles to provide reasonable frame rates in this game, barely breaking the 30 FPS mark. On the other hand, the bottleneck is clearly the GPU core itself and not the memory bandwidth, as enabling 4xAA is essentially free. 1280x800 would be required in order to get truly playable frame rates with the 7800 chip.

Day of Defeat: Source is more CPU limited than Lost Coast, and different map content allows the 7800 to run at 1440x900 with basically acceptable frame rates. It's interesting that where the slower graphics cards actually do better on DODS, the M1710 is able to scale to higher frame rates with the lower resolutions in Lost Coast. The 2.16 GHz Core Duo CPU appears to max out at about 47 FPS in DODS, at least on 945PM chipsets.

Gaming Performance: Far Cry Gaming Performance: Quake 4
Comments Locked

34 Comments

View All Comments

  • NullSubroutine - Tuesday, May 30, 2006 - link

    In the article the author mentioned the painfulness of disassembling the laptop system, however I disagree. While not being two thumb screws like on some desktops, after taking apart the laptop (which doesnt void your warrenty, as tell had me disassemble so to take the CD/DVD drive in and out to fix a glitch) after a few times, it becomes a breeze. I can take it apart in less than a minute.

    I would have liked to have seen the comparison of the 7900 GS vs the 7800. As a early i9400 buyer, I was plagued with the 7800 (didnt realize it wasnt the 7800 Go GTX until after it was purchased), there is some good info on i think its called notebookforums or something on how to overclock your gpu with some volt mods. I could get 485/965 on 1.3 volt mod, but it gets hot, and accept a 450/960 on 1.2v (default is 1.1) the 130watt psu helps (I highly recommend) and you should prop up your laptop. I use two 'crystal light cup packs' under each backside pad; I actually perfer it propped as it is easier to type with the backside elevated a bit.

    Unfortunetely, dell isnt shipping the 7900 Go GTX, otherwise you could drop that video card right into an older shipping model of the i9400. You can always slightly mod your case and put the 7800 Go GTX in there...but I'm personally gonna wait (and save money) to get the 7900 Go GTX later, or get the 8800 Go GTX sometime later this year if it is released (dell will offer it for the m1710 and it will fit right into the i9400). But this is only if I really decide to droop myself low enough to switch to Vista....shutters....I really hate MS for making DX10 Vista only.

    Also, Dell said the Memron will work perfectly (needing at most a bios update) with either laptop.
  • ElFenix - Tuesday, May 30, 2006 - link

    and what pipe configuration does it have?

    thanks!
  • JarredWalton - Wednesday, May 31, 2006 - link

    20 pixel, 7 vertex (I think), 375/1000 clocks are typical. I'm not positive what the Dell model has on clocks, as there is some variation, but it should still be quite a bit faster than the GF Go 7800. I figure the GF Go 7900 GTX adds another 20-30% in performance, however, as it has even higher clocks (500/1200 with 24/8 pipelines).
  • anandlurker - Tuesday, May 30, 2006 - link

    I'm glad that Anandtech include Source DoD for benchmarking, i love this game but when i bought my $300 7800gt just to play this game, the results were mediocre and rather disappointing for this kinda of price. I hope future benchmark from Anandtech include this game, it's a nice simple multiplayer game that seems to render 7800 series useless(pricewise).

  • JarredWalton - Wednesday, May 31, 2006 - link

    The fastest scores I've seen on DODS top out at around 67 FPS with audio enabled. (Overclocked FX-62 running 3.08 GHz.) The game is very CPU limited, at least with any reasonable GPU. That said, I find 40 FPS to be very playable on this particular title, though lots of people want higher frame rates.
  • turkster - Tuesday, May 30, 2006 - link

    you dont even need the modified INF drivers, the installed Nvidia drivers that came with my M1710 will allow me fix aspect ratio and set scaling options without any problem.

    For those interested my M1710 (T2500 2Ghz, 2GB RAM) with 7900GS graphics card scored 3805 in 3dmark06 straight out of the box with no tweaks or new drivers etc. This seems a quite respectable score and puts it considerably ahead of the 7800go. I havent done any further benchmarks yet but my experience so far shows that it is quite capable of playing FEAR at 1920x1200 4xAA perfectly smoothly, similarly FarCry and HL2. As such it would seems like quite a good option for those who cant quite stomach the rather steep price of 7900GTX.
  • JarredWalton - Tuesday, May 30, 2006 - link

    So there is an option to do 1:1 scaling - I've removed the paragraph on this. I would have never thought to look in the drivers for this, and it certainly could be placed in a more prominent position. I guess I'm just used to older laptops that did this via BIOS/keyboard shortcuts. (I'm getting old.... LOL)
  • mrSHEiK124 - Tuesday, May 30, 2006 - link

    You actually can have the laptop scale resolution while preserving aspect ratio, you just need to install nVIDIA's desktop drivers w/the modified INF that allows them to run on mobile parts and then you can use the scaling settings built into the drivers.
  • ahmshaegar - Tuesday, May 30, 2006 - link

    Now I don't know about the Nvidia-based laptops, but I have the Dell Inspiron E1505 (with ATI x1400 Mobility) and to have the aspect resolution preserved when changing resolutions, there's an option in the control panels (both CCC and the old ATI control panels have the option to preserve aspect ratio when changing resolutions.) I'm guessing that it would be the same for Nvidia.
  • Thor86 - Tuesday, May 30, 2006 - link

    So, instead of reviewing DTRs, which it seems no-one really cares about, how about a review of ultra-portables?

Log in

Don't have an account? Sign up now