Miscellaneous Aspects and Concluding Remarks

Over the course of the review, I have mentioned at multiple places that the MAGNUS EN980 has a surprisingly great noise profile. In order to get a rough quantitative feel of this aspect, a Sound Meter app on the OnePlus 3 was used to graph the loudness rating. The phone was kept right on top of the chassis - equivalent to putting one's ears right on top of the unit while in operation.

At idle, the operation of the water pump and the 620 RPM fan result in loudness ratings between 28 dB and 35 dB. On the other hand, when subject to maximum stress, the rating climbs up to around 70 dB.

Coming to the business end of the review, Zotac must first be congratulated for maintaining an excellent noise profile for the PC. The compact watercooling setup has proved to be very effective. The thermal design is able to keep component temperatures low under both idle and loading conditions, preventing excessive thermal stress from shortening lifespan of components.

The EN980 and the NUC6i5SYK can make it together in a single frame, but the performance packed into the former is way out of the NUC's league - particularly from a gaming viewpoint

The EN980 is not without its faults or scope for improvement: For example, the front USB ports can't be used for booting / installing an OS (and the information is buried deep in the manual). The DDR3L memory can't be 'overclocked' by much and the BIOS options could do with some overhaul. The M.2 SATA SSD reached more than 70C for long durations with the AIDA64 System Stability test. A thermal solution for the M.2 slot is definitely needed. Most SATA drives should be fine, but, if the same chassis / cooling design is used for a NVMe drive in the future, there is some scope for overheating. We could also use some improvements in the chassis design - in particular, a carry handle of some sort for better portability - would be nice to have. It would also be useful to route one of the four display outputs to the front panel. The two power bricks solution is a bit clunky. We  might get better efficiency with a slightly larger footprint and an internal slim PSU. Dated internals (no support for DDR4 SODIMMs or M.2 PCIe SSDs) are a bit disappointing for a premium machine, but those point to how long Zotac has actually been working on perfecting this product.

Make no mistake - despite the list of feedback points being longer than the list of positives, the Zotac ZBOX MAGNUS EN980 is hands-down the most innovative small form-factor machine to have come to the market in the last several years. We haven't seen something this different and impressive (in terms of CPU and GPU performance for a given size) since Intel introduced the Sandy Bridge NUCs. Credit must be given where it is due, and no praise is too less for the R&D team at Zotac for pulling this off.

Creating a technically impressive product is only one side of the equation. The product must also be priced right to have the right impact in the market. Our personal opinion is that the $1600 barebones price is a bit on the higher side. However, Zotac indicated that their market research pointed to the price being reasonable for the specifications. We have also seen that the gaming market is not as price-sensitive as the other consumer market segments, and this might lend credence to Zotac's observations.

The Zotac ZBOX MAGNUS EN980's system performance and VR-ready GPU configuration should satisfy the vast majority of gaming enthusiasts. We have a compact unit that is able to properly support a high-end desktop GPU while maintaining excellent thermal and acoustic parameters. Pretty much the only people who might find it unattractive are those who tend to upgrade components selectively over the lifespan of their gaming system, or DIY enthusiasts who want the latest and greatest in choice of components for their PC build.

We hope Zotac is committed to this chassis design and thermal solution for future products in the premium gaming mini-PC space. In the short term, the ZBOX MAGNUS EN980's internals should be updated with a Pascal GPU. When Kaby Lake comes around, we hope Zotac integrates a motherboard with more modern features. Given the cost of the unit, we are sure prospective consumers wouldn't mind a few hundred dollars more for a Z-series chipset with, say, Thunderbolt 3 and a few more USB 3.0 ports spread around the chassis.

Power Consumption and Thermal Performance
Comments Locked

30 Comments

View All Comments

  • Oxford Guy - Saturday, August 27, 2016 - link

    "As for 70 dB - note that it is at maximum stress, and with the microphone placed right on top of the unit. It is unlikely that the unit will be subject to that much load, and even if it is, it is probably some intensive game or the other - the audio from those titles will easily drown out the fan / pump noise.

    It is also important to stress that it is a rough estimate - the readings were not carried out in a soundproof room and no special care was taken during the recording of the graph. I can say subjectively that is is much more silent compared to any other non-watercooled desktop PC I have seen or built. I encourage you to check it out in person if you can (or, you can pitch this to the SPCR guys and they will provide you a more reliable verdict that can be the final word - after all, that is their speciality)."

    So you're saying the load noise reading that we need to see, the usual one, just isn't in the article. Instead, we were given an academic reading that doesn't really tell us anything useful?
  • mr_tawan - Friday, August 26, 2016 - link

    I think I saw some youtuber (Linus, if I'm not mistaken) dissemble this system.
  • The_Assimilator - Friday, August 26, 2016 - link

    Thanks, it's https://www.youtube.com/watch?v=5Qu7qckqulY - much more informative.
  • fanofanand - Thursday, August 25, 2016 - link

    $1845 for last year's tech. *Yawn*
  • milkod2001 - Friday, August 26, 2016 - link

    Zotac caters for IT noobs with zero clue what is inside. Plenty out there so it might sell quite well. The rest can build 4K ready PC monster for that price.
  • Wineohe - Friday, August 26, 2016 - link

    Yes the effort put forward for this review should have been saved for a Pascal variant.
  • kyuu - Friday, August 26, 2016 - link

    Way too expensive given the components and it's barely smaller than a mITX case. But I guess someone must be buying these overpriced boutique systems since they keep making them.
  • AnnonymousCoward - Saturday, August 27, 2016 - link

    My mid-tower is significantly quieter, cooler, faster, cheaper, and has 1TB SSD. (well duh, but it's worth saying)

    Btw Page 1 could have used a picture with a known object like a soccer ball to show relative size.
  • Calista - Sunday, August 28, 2016 - link

    What's the point in creating a tiny box if it demands a huge external power brick?
  • Namisecond - Monday, August 29, 2016 - link

    Would LOVE to see Anandtech review and compare these machines with the most recent iteration of the Alienware Alpha.

Log in

Don't have an account? Sign up now