ASUS TUF Z97 Mark S Conclusion

To end with a cliché: beauty is in the eye of the beholder. For those that like a clean white camouflage design, it is easy to be seduced by the Z97 Mark S. After the positive responses ASUS received after showing a preview at Computex, it was almost a no-brainer release for them. This was something their following requested, and in my opinion it has been implemented well. There definitely feels like an attention to detail, even if the detractors might call it a paint-job over a TUF Mark 1.

Putting aesthetics to the side and looking at the motherboard pragmatically, it offers a few controllers over the base Z97 implementation, such as extra SATA ports and extra USB ports both from ASMedia controllers. Networking is provided by Intel I218-V and Realtek 8111GR controllers, with the bundled TurboLAN software allowing for packet prioritization. Audio comes in the form of an adjusted Realtek ALC1150 setup with PCB separation and filter caps, and PCIe layouts support x8/x8 multi-GPU gaming configurations.

The motherboard comes with Thermal Armor pre-attached, giving the white PCB of the motherboard a cleaner look, and in the box are a number of slot protectors and port defenders to reduce dust or corrosion. TUF branded motherboards are designed for their longer five year warranty, and while these might help extend that, they are not a condition for the warranty. ASUS instead offers air baffles for directional airflow and fan management software to help the situation as well as implementing components with a longer life span.

In terms of benchmarks, the Z97 Mark S comes out very well. Idle power consumption was a little high, but load power consumption was average and POST times were a reasonable 11 seconds. The Z97 Mark S takes the record for the best DPC Latency we have ever seen on a motherboard (an award it shares with the Maximus VII Impact we are currently testing), and also has very good audio scores. Due to its use of MultiCore Turbo, it also scores highly in our CPU tests.

The BIOS and software situation for ASUS products is ever evolving. While the package is missing some minor tweaks I would like to see, both the software and BIOS are more well-rounded than others and offer good tools in general. TUF motherboards have very good fan control systems, attempting to tune for power and noise, and I am pleased to see RPM/Temperature graphs in the mix as well. There is a lack of OC options in the OS software, and no one-touch button for overclocking, despite the Z97 chipset being used which might deter users who have never fiddled in a BIOS before.

Pricing of the ASUS Z97 Mark S has yet to be announced, but we assume it to be in the $260-$300 region alongside the other Z97 TUF motherboards. At $300 it might be a bit of a stretch price, even for a limited edition motherboard, but at $260-$275 it makes more sense.

It is very rare we get a chance to review the first production motherboard from a limited edition line but the Z97 Mark S performed solid from the start. For anyone wanting to show off a white motherboard build, the buck starts at the Mark S with a few white LEDs. Even if a user keeps it in a closed case for private viewings, the fact that it is a TUF range product is a big plus.

All ASUS needs to do now is create a TUF line of GPUs, and a limited edition white one, and put the two together. Failing that, I expect to see the Galaxy booth at CES to pair a Mark S with their white HOF cards. At Computex ASUS showed off an example build with one of their pre-release units:

 

Gaming Benchmarks
Comments Locked

45 Comments

View All Comments

  • WithoutWeakness - Monday, November 10, 2014 - link

    Solid board with good looks. The last paragraph is on point and more than one person will most certainly pair this with a GALAX HOF card, some Dominator Platinums, and white LEDs throughout for a very clean, high-performance rig. Glad to see more options on the market, especially considering the recent trend of every manufacturer pumping out black/red boards.
  • MrRez - Wednesday, November 26, 2014 - link

    Here is my build using this board as the centre piece :)

    http://linustechtips.com/main/topic/257519-my-firs...
  • lilmoe - Monday, November 10, 2014 - link

    If a screw falls in there, you're "screwed".
  • Yuriman - Monday, November 10, 2014 - link

    Plastic covers over hot components, requiring the use of small fans seems like a bad idea.
  • Flunk - Monday, November 10, 2014 - link

    Never fear, the plastic doesn't actually cover anything hot. It serves basically no purpose past dust protection and looking pretty, but it shouldn't cause any overheating.

    Don't get me wrong, I love ASUS (I have a P8Z68-v PRO in my gaming desktop), but the "thermal armor" thing is totally pointless. It wouldn't stop me from buying a board, but it's entirely for looks.
  • Samus - Monday, November 10, 2014 - link

    it does look good, for those that care. me, well, I put a cover on my case and might look in there 2 years later...
  • Wwhat - Thursday, November 27, 2014 - link

    I think the idea might be that the CPU cooler and GPU cooler's heat that gets into the case doesn't get to the motherboard? Or maybe it's just nonsensical bullshit, *shrug*
  • pocketdrummer - Friday, April 17, 2015 - link

    Actually, it still seems like a bad design especially if it's for dust protection. They put an UNFILTERED intake fan on the rear of the computer (right next to the exhaust fans, mind you) and pipe it underneath the plastic cover. If anything, you're going to inject dust up underneath the cover that's supposed to prevent dust.

    This makes no sense.

    Basically it looks cool. That's about it.
  • Tamarocker88 - Monday, July 13, 2015 - link

    The intake fan on the rear of the computer is actually filtered. There's a small removable filter included. As for dust getting stuck under the plastic cover, the BIOS includes fan controls to automatically reverse the flow of the board's fans periodically, preventing buildup. This combined with the bottom and front of the case having removable filters should provide for a great dust protection system.
  • ZeDestructor - Monday, November 10, 2014 - link

    I have the older Sabretooth Z77 right now. I installed, then removed the fans, and there was no meaningful change in temperatures.

Log in

Don't have an account? Sign up now