Southbridge Performance

In our hard drive transfer tests, we copy our two folders from our source drive to an identical target drive to test the transfer speed of the disk controller. Our 780a board has the fastest transfer rates although the SB600 on the 790FX and SB700 on the 780G products keep pace with the NVIDIA offerings.

Large File Copy Test - 7.55GB

Small File Copy Test - 602MB 

We utilized a Maxtor One Touch external 300GB drive for our USB 2.0 transfer tests that feature the same file folders used in our hard drive transfer test. This particular setup has support for Firewire 400, Firewire 800, and USB 2.0. Our Firewire tests are dependent on the IEEE 1394 chipset utilized and will be covered in the motherboard review.

USB - Large File Copy Test - 7.55GB

USB - Small File Copy Test - 602MB 

Historically, NVIDIA and Intel have had very good USB performance compared to AMD/ATI. AMD finally addressed USB performance concerns with the SB600 although performance still lags compared to other chipsets. The SB700 utilized on the 780G boards offered additional performance improvements and is about on par with Intel and NVIDIA now.

The SB600 equipped 790FX board trails the NVIDA and SB700 equipped 780G slightly in our transfer tests. Overall, the differences are fairly minor in actual usage and will not be noticed by users.

Gaming Performance Memory and Overclocking Performance
Comments Locked

38 Comments

View All Comments

  • SiliconDoc - Monday, July 28, 2008 - link

    Very glad this happens : " The good news is that ASUS has replicated several of our problems and we expect a new BIOS release shortly for use in the motherboard review. "
    That's what I call useful review that isn't a waste of time. Glad you have the reputation and the pull. ( one wonders what they do at Acer - I guess they wait for you guys to tell them...)
  • piroroadkill - Sunday, May 11, 2008 - link

    I agree with the guys who are saying they need to make discrete (not discreet, jesus) GPUs consume much less power when idling, even if that means a hybridpower style segmentation of the gpu, but it should be done all on the hardware, completely transparent to the chipset and system
  • KGR - Saturday, May 10, 2008 - link

    Maybe hybrid sli doesnt help frame rates too much , but it can make sense when nvidia integrates the Ageia pysics in gpu, then the mgpu can take the load of physics and the dgpu the graphics in hybrid mode, i dont know if it is possible but i think it is...
  • duploxxx - Thursday, May 8, 2008 - link

    Always like to read the reviews and comments from your site, but why don't you just provide proof with real data instead of a hit in the dark. You already have big parts of the data in an other review.
    (http://www.anandtech.com/video/showdoc.aspx?i=3232...">http://www.anandtech.com/video/showdoc.aspx?i=3232...

    " Whether or not this price tag is worth the premium over the nForce 750a SLI boards is up for debate. It's not really in our opinion as we do not believe the current AMD processor series is capable of the required computational power needed to support 3-way SLI or Quad SLI configurations. This is not a knock against NVIDIA as AMD has the same problem with Quad CrossFire; it just reflects the current state of the processor offerings from AMD."

    why don't you just put 9750-9850+790fx+2-3way crossfire against q6600/q9300+x38+2-3way and compare total price/performance/power but perhaps need to add a x48 board since the lack of pci-e lanes on the x38

    you could do the same with lower spec P35 but then again this board has no decent feature set against current amd chipset offerings when you talk about multi gpu setup but would still be interesting to read what happens when using CF on this board against amd770
  • gipper - Wednesday, May 7, 2008 - link

    So why isn't the 750a going to be the perfect HTPC motherboard?

    Aren't the two requirements for the perfect HTPC motherboard native 1080p output via HDMI and 7.1 LPCM audio on the same HDMI connector? Also, the post processing with a phenom matches the AMD 780 chip feature set.

    So, I don't understand why you would say that the AMD 780 is better for HTPC's.

    Or are you guys suggesting that it's best to wait for the AMD 780 refresh that includes 7.1 LPCM because the integrated graphics perform so much better?
  • Gary Key - Thursday, May 8, 2008 - link

    I personally believe the 750a would make an excellent HTPC system if you utilize a ATX case design, might plan on using it for gaming with a discreet video card, and can afford it. The GF8300 board that just arrived is a better solution at first glance (if a uATX design and not having SLI capability is important) and compares favorably to the 780G from a price to performance viewpoint, more so than the GF8200. We will have an update on it next week.
    We received the 175.16 drivers right after the article went live and will have some post-processing comparisons (174.14s did not handle this right) this weekend between the two chipsets. Right now, it is a toss up in my opinion, and due to that fact, I would go NV for the multi-channel LPCM.
  • The Jedi - Wednesday, May 7, 2008 - link

    A couple of points here:
    [QUOTE]
    This is absolutely unacceptable and would prevent us from recommending the 780a as anything more than just another SLI motherboard. HybridPower is quite possibly the best feature for a high-end SLI user and if it won't work with 30" displays then its usefulness is severely degraded.
    [/QUOTE]
    I'll tell ya I use a 26" LCD TV on my desktop and it's big enough. I don't need 2560x1600. 1080p (1200p) is fine and matches the pixels on HDTV. Anything 1080p capable is completely reasonable. Just up the AA or AF if the FPS are too fast for ya. Just because Dell or Apple says Uber-users need a 30-inch LCD to be cool doesn't make it true. 24", 26", 27", these are great on today's desks. I really think a 30" LCD on my desk would be too big.

    Gary Key, you da man, seriously, but proofread the article for typos.

    Last point, and this goes for all of Anandtech's staff: Respect due, but seriously: NO dGPU. Call it A VIDEO CARD. Or -- A GRAPHICS CARD. Also, no calling a product from a CPU or GPU company a 'part' . Call it a chip -- or a CPU or a graphics chip, etc.
  • strikeback03 - Thursday, May 8, 2008 - link

    I'd love to see a 2560x1600 24-26" display, the more resolution the better. If that 9 megapixel LCD weren't several thousand dollars it would be sweet.
  • Wolfcastle - Wednesday, May 7, 2008 - link

    The author should clean up the grammar a bit. Anandtech has a large audience.
  • James5mith - Wednesday, May 7, 2008 - link

    Maybe I'm just foolish here, but for the extreme overclocking crowd, I see an immediate and tangible benefit:

    If you happen to fry your video card while OC'ing it, you can use the onboard video as a stopgap until you get it repaired.

Log in

Don't have an account? Sign up now