Sunbeam Trio

Still, at the relatively cheap end of the spectrum is Sunbeam's Trio case. As the time of writing, it was available for as little as $70 online. For the most part, the Trio looks more like a gamer's case, but this doesn't mean that it couldn't appeal to a slightly more mature crowd either.


Click to enlarge.

Finished in a glossy piano-black shine not unlike the X-Cruiser, the Trio is another case where keeping a cotton cloth on hand to keep it clean will make a big difference. The front bezel is entirely made of plastic, except for the metal ventilation grill on the right.

The typical auxiliary ports are on the right side of the case, but there are also volume controls for the headphone out and microphone input, which is definitely a nice touch.

Opening the large plastic front door gives us a look at the four optical bays, two floppy bays, power and reset buttons and LEDs.


Click to enlarge.

Also notice how, like the X-Cruiser, the Trio has three blue gauges monitoring volume, fan speed, and temperature. In the following close-up, note how this case's gauges are better labeled than the ones on the Aspire.

Moving on, let's take a look at the rear of this case.

There are a couple of things to point out about the back exhaust, the first of which is the perforation. While the holes certainly look big enough, there's actually just about as much metal here as space for air to pass through, which is a less efficient design than the spacious hexagon cutouts that other cases have in this roundup.


Click to enlarge.

Luckily, it does have something going for it that most of these cases do not, and that is the option of running either dual 80mm or a single 120mm fan. The trio does include a 120mm one though, so unless there's a much better use for it elsewhere, it probably makes the most sense just to leave it there.

To get a better idea of what the Trio looks like from the side, we're going to jump immediately to some pictures of the case with the test bed fully installed.

DynaPower F3323 (cont’d) Sunbeam Trio (cont’d)
Comments Locked

48 Comments

View All Comments

  • Abecedaria - Sunday, September 11, 2005 - link

    What was the criteria for choosing these cases? Most of them look nasty-plasticy and even the Antec P-180, although it looks good, has a veery plasticy feel.

    Where was Silverstone in your review? They have some of the best cases available:
    http://www.silverstonetek.com/product-case.htm">http://www.silverstonetek.com/product-case.htm
    and from their new subsidiary:
    http://www.tuniq.com.tw/Chassis/chassis.htm">http://www.tuniq.com.tw/Chassis/chassis.htm

    These things rock.

    abc
  • unclebud - Monday, September 12, 2005 - link

    please consider reviewing the performance 640 next time?
    it currently includes a smartpower v2 400w, for $129
    thanks in advance
  • Rudee - Saturday, September 10, 2005 - link

    There is an error in the article. The Sonata II does indeed have a removable air filter in the front of the case, thus should not be given a score of "0" for this catagory.
  • Tamale - Saturday, September 10, 2005 - link

    The filter is removable from the bottom of the case only.. while this certainly is 'removable', it is nowhere near as accessible as the other cases which I gave this point to. I struggled with the idea of giving the case .5 for this category, but it wouldn't have made a difference in the end, and I really don't feel that most users would go through the trouble of tipping the case over just to clean the filter, so no points were awarded.

    Thanks for pointing out the detail though.
  • Rudee - Saturday, September 10, 2005 - link

    The Sonata II case is great. I was able to overclock a AMD 64 3700 to 2700mhz using the stock AMD heatsink and fan with one Panaflo 92mm fan in the duct over the CPU. Temps are great and I ended up returning my Zalman 7700 as I didn't need it.
  • dgkulzer - Friday, September 9, 2005 - link

    After 1 month of use I am very happy with my P180. Assembly does take a bit longer than a standard case if you are trying to hide your cables but that isnt much of an issue to me. I put a Phantom 500 PSU in it and because its longer than most other PSU's I had to replace the lower fan with a thinner model (Nexus 120). I have 4 hard drives in the lower chamber and the Nexus at 5 volts keeps them very cool - I havent had the Phantom fan kick on yet either.

    This is one case that looks better in person than it does in pictures, the pictures make it look like a little fridge or something but it looks pretty sweet on your desk :)
  • mschira - Friday, September 9, 2005 - link

    I guess the two compartment design is great for watercooling. You could put the pump reservoir etc in the lower compartment. If something leaks, the electronic is save.
    I think that's great thing...
    M.
    P.S. onla trouble is where to put the power suply...
  • Griswold - Friday, September 9, 2005 - link

    Kids, having a flashy computer under your desk doesnt make the chicks like you more. Say no to stupid side windows!
  • Tamale - Friday, September 9, 2005 - link

    you seem to forget that most kids who think it would look cool to have the window in the first place probably don't care about girls anyway ;)

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool
  • Griswold - Sunday, September 11, 2005 - link

    quote:

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool


    Besides the total lack of EM shielding (which is enough reason to not do what you did, not only because it's not allowed in many countries (I know, I know, US is different, there, the cops wont stop you if your car has only 3 wheels..)), a full acrylic case is a nice show thingie. I just find side windows embarrassing, especially when the rest of the case looks like Optimus Prime's chest armor.

Log in

Don't have an account? Sign up now