GIGABYTE Z170: Micro-ATX and Mini-ITX

GIGABYTE Z170MX-Gaming 5

Moving back to the gaming line and we get a couple of models in smaller form factors. The MX naming here implies a micro-ATX design.

Here we get what is technically an x8/x4/x4 arrangement, although two-way graphics solutions will typically block the third slot. The PCIe slots get the metal shielding, but due to the lack of space the M.2 slot is now between the PCIe and the chipset – this M.2 runs at PCIe 3.0 x4 for full bandwidth. The styling on the motherboard is similar to that seen on the Gaming 3, which means no rear panel cover but the red/black/white motifs are still present on the heatsinks.

The Alpine Ridge controller is in play here for the USB 3.1 A+C port combinations on the rear panel, while networking duties are through the gaming-focused Killer E2400 network controller. Realtek provides the ALC1150 audio in GIGABYTE’s enhanced solution, with an upgradable OP-AMP as part of the design.  Storage extends from the M.2 mentioned before to six SATA 6 Gbps ports that are split into pairs for the three SATA Express configurations.

GIGABYTE Z170N-Gaming 5

Marching into the mini-ITX arena for the gaming range is the Z170N-Gaming 5, with a heatsink/heatpipe arrangement that looks a little different than normal. The power delivery is adjusted too as a result. Functionality here by virtue of the small size extends to a Killer network port as well as the Intel 802.11ac 2T2R dual band AC-8260, Intel’s 3rd generation AC adapter which also supports Bluetooth 4.2. For such a small motherboard we also get the Alpine Ridge controller providing the usual USB 3.1 A+C combination, and it’s worth noting that the power connectors are on the outside of the motherboard which should make it easier to install than some previous GIGABYTE motherboards.

GIGABYTE Z170M-D3H - MSRP ($115)

The Z170M-D3H is aimed at being just the micro-ATX version of the Z170-D3H, with the focus being a few added features over the regular chipset integration. Surprisingly we get a pair of PCI ports from a bridge chip here, but the PCIe slots are given by a PCIe 3.0 x16 from the CPU and a PCIe 3.0 x4 from the chipset. Another four PCH lanes go to the M.2 slot in the middle, with six SATA ports / three SATA Express ports also included in the storage aspect of the motherboard. There is no USB 2.1 here, relying purely on USB 3.0. Networking uses the Intel I219-V and audio from the Realtek solution.

GIGABYTE Z170N-WIFI

The Z170N-WIFI follows a line of N-WIFI boards from GIGABYTE that has gone back several generations. The aim here is to make something that fits in similar to the Z170N-Gaming 5 but under that on the Ultra Durable line and that costs a little bit less. So while there are no power delivery heatsinks to speak of there are dual Intel I219-V network ports as well as the Intel AC-8260 dual band wireless card. Audio is an upgraded relatek solution and an ASMedia controller gives USB 3.1 A+C. GIGABYTE historically gives this board dual HDMI ports, and we get them here in 1.4b form. 

GIGABYTE Z170: Super-Overclock and Ultra Durable Supermicro Z170
Comments Locked

85 Comments

View All Comments

  • SirKnobsworth - Thursday, August 6, 2015 - link

    The uplink to the CPU is only 32 Gbps, so there's no point in attaching something with more 4 lanes to the chipset.
  • SirKnobsworth - Thursday, August 6, 2015 - link

    x8 isn't going to be a bottleneck for the GPU.
  • repoman27 - Wednesday, August 5, 2015 - link

    In case anyone else was wondering what LSPCON actually stands for, it's a Level Shifter / Protocol CONverter. I've been trying to parse that ever since the initial Alpine Ridge announcement / slide leaks.

    I'm glad to see that Alpine Ridge actually includes an integrated LSPCON, because that wasn't entirely certain based on the earlier reports.

    MegaChips appears to be first to announce a discrete LSPCON with their MCDP28 family: http://www.megachips.us/products/documents/MCDP28x...
  • timbotim - Wednesday, August 5, 2015 - link

    So far, I have only found that ASRock have a workaround for the win7-install-via-USB stick situation. Found it in the z170m pro4s manual on p.41 (Win7 USB Patcher). Out of interest does anyone know if using a USB adapter card in an expansion slot gets around the no-EHCI-in-Z170 problem?
  • Mithan - Wednesday, August 5, 2015 - link

    I want to buy a mITX board and upgrade to one of these babies, only issue is ... which one. I am sick of big cases.
  • Mr Perfect - Wednesday, August 5, 2015 - link

    Everyone loves a mini-ITX gaming motherboard, right?


    Right!

    Even if it says Fatal1ty?


    Damn it...
  • meacupla - Thursday, August 6, 2015 - link

    I think Asrock's mITX board is still better than Gigabyte's, if for only one little detail, which is the presence of a killer branded NIC.
  • Xpl1c1t - Wednesday, August 5, 2015 - link

    Gamers these days...
    Look at all the flashy slots, shrouds and heatsinks.
    Embarrassing.
  • dtsavage - Wednesday, August 5, 2015 - link

    3/55 = 5%

    5% of these boards are mATX. What is happening with this form factor?
  • Diagrafeas - Wednesday, August 5, 2015 - link

    I don't like these motherboards.
    My ideal configuration would be:

    1st Slot: PCIE x16(x16)
    2nd Slot: none (m.2 PCIE x4)
    3rd Slot: PCIE x16(x8 electrical from CPU)
    4rth Slot: none (m.2 PCIE x4)
    5th Slot: PCIE x16(x4 electrical shared with 1st m.2)
    6th Slot: PCIE x16(x4 electrical shared with 1st m.2)
    7th Slot: PCIE x16(x4 electrical)

    Which leaves
    6+4 USB3 (preferably 2 internal)
    4 USB2 (preferably 2 internal)
    2 SATA3
    1 Gigabit LAN
    x1 PCIE for wifi ac

Log in

Don't have an account? Sign up now