Conclusion

Our opinion regarding the performance of the new HX750i can be summarized in one word – excellent. It is apparent that Corsair strives to uphold the reputation of the HX PSU series, which may not be their most advanced series anymore but it remains of special significance to the company. The HX750i that we reviewed here today may be the least powerful unit of the HXi series but it remains capable of easily powering a dual GPU gaming system or an advanced professional setup. With a reasonable power output and outstanding performance, the HX750i appeals to enthusiasts that wish to power typical performance and gaming computers but not triple or quad GPU monsters. Furthermore, the HX750i is visually subtle but appealing, and modular with all-black wires for every device, features that advanced system builders and modders will certainly appreciate.

In terms of quality, the HX750i does not disappoint at all. Essentially, the HX750i appears to be a "reinforced" version of the RM series high output units. Both units are based on the same platform and make use of the same cooling fan, but the components used to create the HX750i are of excellent quality – not that the RM series' components are bad, but moving to all-Japanese electrolytic capacitors tends to be reassuring for users. CWT does an excellent job on the assembly of the unit as well, as we cannot find any significant soldering or mechanical cohesion flaws. Corsair covers the HXi units with a seven-year warranty.

As for the performance of the PSU, the numbers speak for themselves. The HX750i is a unit that easily honors its 80 Plus Platinum certification, even when subjected to high ambient temperatures. The quality of the output is great, with superb voltage regulation and very good ripple suppression. Finally, the high efficiency results in low operating temperatures, which in turn result in very low noise.

In fact, the HX750i operates without its fan at loads lower than 300 Watts, meaning that the fan of the PSU will most likely remain off for as long as the system is performing typical everyday tasks, such as browsing the net, listening to music, or watching movies. Even when the fan starts, it never becomes annoyingly loud, not even when the HX750i is forced to operate at maximum load for prolonged periods. Inside a system capable of pushing a 750W PSU this hard, it is unlikely that the sound coming from the PSU would be noticeable over the noise generated by the cooling systems of the components.

There is really only one issue with the HX750i – the retail price of $170 is quite steep, even considering its performance and features. There are not many 80 Plus Platinum 750W-760W units currently available and the Corsair HX750i is the most expensive of them all. The strange part is that the AX760i, a unit with even better performance and more features, currently retails for $164 after rebate, making the very existence of the HX750i a strange situation.

It appears that Corsair shot themselves in the foot, as there is no reason not to prefer the AX760i to the HX750i, not even if the AX760i is selling at $184 without any rebate, let alone while it is cheaper than the HX750i. For a few weeks before Christmas, the HX750i was available for $130 after rebate, a much more reasonable price for this unit and strategically priced between the AX760i and the RM750. If the price falls to that point again, then the HX750i would be a good option for those seeking a PSU with a little better performance than an RM750 and greater value than an AX760i.

As long as the price of the HX750i remains near (let alone above) the price of an AX760i, there is no real reason for anyone not to go with an AX760i instead. It offers slightly better performance in a more compact chassis, with the result being that there's a lot of overlap right now. Eventually we expect the HX750i to end up priced right between the AX760i and HM750, closer to the $150 price point; considering both the HM750 and AX760i are selling well below MSRP while the HX750i remains at MSRP, it's bound to happen, and when it does the HX750i becomes a much better value proposition for those looking for an excellent 80 Plus Platinum PSU.

Hot Test Results
Comments Locked

32 Comments

View All Comments

  • icebox - Wednesday, January 14, 2015 - link

    I had this for a few months now, it's an excellent PSU.
    But I'm curious about which way it should be mounted:
    Fan side up so heat can escape easily when the fan is off or fan side down ?
  • RedEye9 - Wednesday, January 14, 2015 - link

    I have a bottom mounted 750 watt corsair ps with a load/temp activated fan. It would cycle when mounted fan side down to blow out accumulated heat. I turned it fan side up and the fan never cycles. (silence)
  • jonnyGURU - Friday, January 16, 2015 - link

    ^^ This. Fan down and the heat will rise into the PSU PCB until the fan kicks in. Fan up and the heat rises out of the PSU housing and the fan will hardly ever kick in.

    While the Corsair marketing says that the PSU's fan doesn't turn on until 30% load, that really depends on multiple conditions. The fan controller used in these uses an algorithm of load, temperature and duration to determine when the fan should turn on and at what speed.
  • EzioAs - Wednesday, January 14, 2015 - link

    Doesn't really matter actually but if your chassis has a filtered bottom intake, might as well mount it with the fan facing down.
  • Strunf - Thursday, January 15, 2015 - link

    Better with the fan facing up as you said the heat will escape easily and the fan will hardly ever spin since you don't use too much power most of the time.
  • malkolm - Wednesday, January 14, 2015 - link

    Nice review, thx for it!

    Actually i do not agree with you mentioning, that a 750W System is intrinsically so load that the noise of a PSU doesnt matter at all. I dont know if it's a european thing, but at least here the ultra-low noise market is growing extraordinarily, meaning more and more people are build machines, even their top-end gaming rigs, and demand it to be litteraly inaudible.

    Really big tower coolers, custom GPU designs and of course custom water cooling (again a rapidly growing market in the EU) help with this, but the one thing most people end with is the annoying scenario of having the PSU left as the only source of noise. Of course one can buy one of these semi-passive devices designed for 1500Watts to power their 600Watts gaming rig just to make sure its fan doesnt start to run, but thats not a viable option for most users.

    There are only a few companies who had an ear for those users, with beQuiet! (German brand/company i think) beeing to most renown and most recommended manufacturer for this market. I guess Corsair is also good advised to focus more on their accoustics.
  • Kutark - Wednesday, January 14, 2015 - link

    Using a 1500w PSU to make it more silent is just irresponsible. PSU's have much better efficiency when they're between about 40 and 70% load. Getting a 1500w psu like that, despite the additional cost with buying, generally means you will be operating at a load level that is moderately to highly inefficient.
  • Dr.Neale - Saturday, January 17, 2015 - link

    Not if you get a 80+ Titanium rated semi-passive 1500W PSU, e.g. Corsair AX1500i. It's very, very quiet (with the fan facing upwards, of course).

    Of course, the 80+ Platinum SeaSonic 520W fanless PSU (SS-520FL2) is totally silent, with no coil whine to speak of, and 1/3 the price. It's good for a quiet single-GPU build.

    N.B. Low ripple is especially important for the longevity of your computer components. And the lower the ripple, the higher the quality, and price.

    That's my experience, anyway.
  • EzioAs - Wednesday, January 14, 2015 - link

    Doesn't really matter actually but if your chassis has a filtered bottom intake, might as well mount it with the fan facing down.
  • EzioAs - Wednesday, January 14, 2015 - link

    I was actually trying to reply to icebox...when are we going to get an edit fuction?

Log in

Don't have an account? Sign up now