Rosewill Blackhawk Ultra Case Review: Were It Not For Competition
by Dustin Sklavos on March 28, 2013 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Rosewill
- HPTX
- ATX
- XL-ATX
Noise and Thermal Testing
When I saw the Rosewill Blackhawk Ultra lacked a fan controller, I immediately became much more skeptical about its performance. Thermally it should do a stellar job, but with no way to modulate fan noise, Rosewill basically has to count on the fans being quiet at stock. An integrated fan controller is practically essential at this price point, so they have to make up a lot of ground to be competitive.
Unfortunately things get a bit worse here, too. The Phantom 630 (which earned our Bronze Editor's Choice) is sitting at the exact same price point, and if you're not running bigger than XL-ATX, NZXT's vastly more feature rich enclosure may prove to be a very difficult competitor to beat.
Ambient temperatures during testing were almost 22C on the dot.
At our stock settings, Rosewill's offering is at least able to put up the thermal performance it needs to in order to be competitive. It's unlikely anyone using this case will run their hardware at stock, but it's good to know the cooling capacity is definitely accounted for.
Unfortunately, noise levels turn out to be a real issue. In the Blackhawk Ultra's defense, while the measured 37.1 dB of idle noise is pretty loud, the character of the noise is actually pretty tolerable. It's very low-pitched due to the size of the fans used; the case essentially sounds like a box of low wind. NZXT's Phantom 630 runs a lot quieter, though, with only a minor three degree uptick in CPU temperatues.
Overclock the system and temperatures begin to compress a little, but Rosewill also continues to perform near the top.
Despite its excellent airflow, though, Rosewill just can't keep the noise levels down. A large part of that is simply due to the fact that the case's noise floor is 37.1 dB, loud enough to drown out most of the other components in the first place.
Unfortunately I don't have results for the NZXT Phantom 630 in our full fat testbed, where I do think the Blackhawk Ultra promises to acquit itself better. The only cases I've tested so far with that testbed are in different price brackets, but this should at least illuminate why spending more on a case isn't a bad idea if you're going for a high end build.
Rosewill's case gets you a not-inconsiderable five degree delta over the In-Win GT1 on the CPU, and GPU thermals are also down by a couple of degrees. In an SLI configuration, the GeForces are going to be pushing their fans to hit a target temperature of 88-90C, so thermals in that instance won't be as telling as noise levels will be.
And here's Rosewill's ace in the hole. While idle noise is still unpleasant, load noise is worlds better than the competing cases. This is why you buy an enthusiast class case for a high end build; the superior airflow keeps the fans on the GeForces from having to go at full tilt, and as a result, the noise level is actually comparatively tolerable.
Facebook
Twitter
RSS
27 Comments
View All Comments
marc1000 - Thursday, March 28, 2013 - link
I guess that's the reason he complains about the cable management issue. It's more of a "chicken and egg" problem lol !!!Jorus - Saturday, August 31, 2013 - link
Did you notice the lack of tie downs? This doesn't excuse the mess in the case but not much to work with under the motherboard for cable management. A shame. I really like the layout. Lack of toolless 3.5, lack of tie downs, small grommets and bad spacing as well, and having to remove front bezel to put in 5.25's. NZXT Phantom 630 or Enermax Fulmo GT is looking like better options for the price range.doubletake - Thursday, March 28, 2013 - link
I feel AnandTech should sponsor Dustin with a personal trainer + intense workout regimen, so he can (hopefully) stop complaining about a case's weight, and the "difficulty" in mounting notched side panels. Apart from that, I enjoy the rest of the content in his reviews.HisDivineOrder - Thursday, March 28, 2013 - link
You could always Kickstarter one.Ninhalem - Thursday, March 28, 2013 - link
I can lift a decent amount of weight (usually lifting 50 to 60 lb gauges all day at work), and I can understand some of Dustin's issues. I don't want to have to lift my case all day long because 1) I'm afraid of dropping the sucker (weighs about 45 lbs) and destroying components, and 2) there are not a lot of decent hand holds on cases especially when you need to lift in a specific configuration (especially when you have a custom loop inside where items aren't always secured down).As for the notched side panels, I usually don't have difficulty with those, but putting both the side panels on after a cleaning is just annoying. I don't like to be annoyed after spending 3 hours cleaning the inside. It is not hard implementing engineering changes to put swing doors on these cases especially if you are charging over $150 USD.
Observist - Thursday, March 28, 2013 - link
Well, Dustin does say that 60 lbs is almost half his body weight, so he's not a big guy. If, like many computer enthusiasts, he were carrying around an extra 200 lbs at all times, lifting a 60 lb case wouldn't be such a big deal, but alas, you're giving him crap for being small.Th-z - Thursday, March 28, 2013 - link
Suggestion: please include filter as a category in your spec table in your case reviews, Dustin. Maybe it's something you don't care so you never/rarely mention even for a case with dust filters in your reviews, but your readers may want to know. Nowadays I don't consider any case without intergrated, easy to remove filters, because even for case with filters, I also have to check the density of filters, and how many fan slots are covered (especially for the intakes). So at least some mentions of it would be appreciated, having some pictures taken would be even greater.Onus - Thursday, March 28, 2013 - link
While a good argument can be made that such shouldn't be necessary at this price point, adding a fan controller oneself and adding fan filters (e.g. nylon hosiery stretched on a frame) will address the noise and dust issues without doing any real harm to cooling performance. The fan controller is incidentally another excellent use for a 5-1/4" bay.freedom4556 - Thursday, March 28, 2013 - link
I don't understand the general disdain for 5.25" bays perpetrated in Anandtech case reviews. I can easily see someone wanting two optical drives for simultaneous rip/burn and a fan controller, and if that's a double height model then that's four bays right there. A case of this ridiculous magnitude should have had four bays as a minimum (which it does). How likely is needing 10 3.5" drives verses two opticals and a fan controller (or two, given how many fans this case supports)? Personally, I think that the suggestion that anyone buying a case this massive would want to whip out and use "an external enclosure and a USB cable" (pg 2) for installing stuff from DVD or watching a blu-ray is asinine, especially when the case comes with a hard drive dock (a more likely use for the "an external enclosure and a USB cable" scenario). Enough with the pie-in-the-sky 'everything's digital distribution and in the cloud' rhetoric already. It's just not true, and not all (even most?) of us have 100 mbps internet connections at our disposal. </soapbox>Grok42 - Friday, March 29, 2013 - link
I am the source of some of this so called general disdain on the case review comments. If you look back through my posts I never complain about them on large cases such as these. My chief complaint is the lack of choice. There are only two mITX cases sans an external drive bay and both of those are recently released. I built my Core i7 3770 / 16GB / Ti 560 gaming rig out of one of them the Lian Li QB25 so I put my $120 where my mouth is. I couldn't be happier with this setup and not once did I need to use an optical drive to install the system or the ~30 games I have on it.The fact is that the vast majority of computers don't have optical drives anymore. If you could phones and tablets as computers then the vast majority don't have any external storage including SD cards. Given that I like to be on the bleeding edge of computing and build custom computers why do I have to put up with cases full of legacy bays I don't need or want? Building custom computers is going to die if the industry clings to the past completely.
As to you other straw man arguments. I long since ripped all my DVDs to my media server. I haven't bought a DVD in years. If you like renting them and buying them more power to you but you also have to admit there is a large portion of the population that doesn't do this anymore and it is only getting larger. 4 years ago all this might have been pie in the sky but today everyone has laptops and tablets without optical drives and are happy watching all their media via digital distribution. These aren't techs but grandmothers. Finally I certainly don't have a 100mbps internet connection. My parents have a 1.5mb and I have a 6mb connection. We commonly stream 3 videos on different TVs without issue and sometimes 4.