Video: Finally High Profile H.264

Section by Brian Klug

There are a few things different with video capture on the iPhone 5 thanks to improvements to both the ISP inside Apple’s A6 SoC, and also software UI changes. First off, because the iPhone 5 display is now 16:9, there’s no cropped view by default or aspect-correct view with letterboxing for video capture. Instead the iPhone 5 video capture window takes an iPad-like approach with transparent UI elements for preview and shooting video.

What’s new is the ability to take still images at 1920x1080 while recording video by tapping a still image capture button that appears while recording. This is a feature we’ve seen onboard a ton of other smartphones and works the same way here. Note that you can’t magically get a wider field of view or the whole CMOS area while shooting video, it’s essentially dumping one frame from video capture as a JPEG instead of into an H.264 container.


In addition the iPhone 5’s tweaked Sony CMOS still uses a smaller center region for video capture. The difference in field of view is pretty big, but nothing that users haven’t already dealt with in the past.

The iPhone 5 brings two main things to video capture. The first is improved electronic image stabilization tweaks and improvements to ISP. The difference is visible but not too dramatic unless you know what you’re looking for. I would wager most users won’t notice a huge step forward from the 4S but if you’re using an iPhone 4 this will be a marked improvement.

The other improvement is video encoding. The iPhone 5 now shoots rear facing 1080p30 video at 17 Mbps H.264 high profile with CABAC. This is a huge step in encoding from the relatively absurd 22–24 Mbps baseline H.264 that the iPhone 4S would shoot at 1080p30. The result is vastly more quality per bit on the iPhone 5, for a big reduction in storage space per minute of video. I did some digging around and found that the A6 uses an Imagination Technologies PowerVR VXE380 for encoding and VXD390 for decoding, which is what I thought was in the previous SoC as well but perhaps wasn’t clocked high enough for encode at high profile. This brings the iPhone 5’s encoder on paper up to match what I see other smartphones running their 1080p video at as well (17 Mbps high profile).

On the front facing camera Apple is shooting 720p30 at 11 Mbps H.264 baseline, as opposed to the VGA at 3.5 Mbps that the 4S shot. Interestingly enough both front and rear shooting modes still are just mono audio, 64 kbps AAC. I would’ve liked to see stereo here since almost all the competition is shooting stereo, and it’d put those 3 microphones to use.


To get a feel for video quality, I stuck my iPhone 4S and iPhone 5 in my dual camera bracket with pistol grip and made a series of three videos. I then combined them and put them side by side for ease of comparison. I’ve uploaded the result to YouTube, but you can also grab the original videos (548 MB zip) if you’d like from the site directly without the transcode.

Overall the most dramatic improvement is the front facing camera, which is obviously night and day. Better image stabilization is noticeable while I’m walking around being intentionally shaky, but nothing hugely dramatic. The main rear facing video improvement seems to be an increase in sharpness (watch the power lines and wires in the native resolution version) and slightly wider field of view. That’s to say nothing of the fact that this quality comes at a bitrate that’s lower than the previous version but with better encode settings.

Camera Stills: Improved Low Light Cellular Connectivity: LTE with MDM9615
Comments Locked

276 Comments

View All Comments

  • rarson - Thursday, October 18, 2012 - link

    Me too, other than the stupid proprietary connection that jacks the price of everything up.
  • Spunjji - Friday, October 19, 2012 - link

    I sit pretty firmly in this camp, too. Despite the physical durability flaws, I do find the overall package of the iPhone 4/4S/5 to be superior to most comparable 'Droid handset. I just find the software to be unbearably obstructive to my desired use patterns.
  • steven75 - Wednesday, October 17, 2012 - link

    Maybe some people want a still larger display but keep the industry leading app support, industry leading hardware ecosystem, airplay, apple store support, industry leading resale value, industry leading OS upgrade support, and without any carrier bloatware?

    Seems pretty possible to me.
  • GotThumbs - Tuesday, October 16, 2012 - link

    "we've just got to deal with it." Wrong. You have to "deal with it".

    Believe it or not....everyone does NOT own one of these phones. The idea of getting a brand new item, be it a car, camera, laptop, tablet or phone and having to deal with the fact that that the companies quality controls are sub-standard is one of the lamest things I've heard....Oh! besides the number one example...... "You're holding if wrong" - Steve Jobs.

    I try to not let this kind of monologue that reeks of Apple fanism not bother me...but come on! Talk about romancing about a freaking phone. Please keep it to a level of unemotional comparisons and the feel free to give your personal thoughts and not assume to speak for everyone else.

    The fact that you felt compelled to write 5 or more paragraphs on the anodizing process is just pathetic. I stopped reading about it after the first paragraph and skipped to the bottom. I thought this is supposed to be a phone review, not a discovery channel episode on the anodizing process. I can't speak for you or anyone else, but I'm pretty comfortable telling you most consumers probably don't care about the process of anodizing, they just expect a quality product for their money.

    People are paying good money...in a bad economy and your saying all they can do is "deal with it"? How about having an open mind and mention they have the choice to buy a different phone or wait for Apple to fix it in their next generation. Your only position appears to be....suck it up, its Apple and thats just part of being in the collective.

    Again,,,,, YOU do not speak for everyone so please drop the "WE".

    Rant done.

    Best wishes to all on your choices in life.
  • crankerchick - Tuesday, October 16, 2012 - link

    Talk about overreaction. Keep the statement within the context of the article. iPhone users have to deal with it if they want to remain iPhone users. Anand is an iPhone user as well are more than a few people reading his review--thus the use of the word "we" instead of the use of the term "iPhone users."

    That said, he should take care lose the "we" but wow, what a rant for something that one can easily use common sense and say, "No I'm not stuck with it." Other bloggers and review sites do the same thing.

    LOL, everyone is always looking for someone to point the fanboy finger at.
  • KPOM - Tuesday, October 16, 2012 - link

    Apparently you have never read an AnandTech review. They go into that kind of detail all the time. That's what people like about them. You aren't going to read that in a CNet, The Verge, or Engadget article. You might get some of that at Ars Technica. But AnandTech goes into excruciating detail.
  • VivekGowri - Tuesday, October 16, 2012 - link

    I mean, it's not like Apple is going to radically alter it a month after production starts, so if you want an iPhone 5, your options are to either put a case on it, or suck it up and live with the scratches. Alternatively, you could buy a 4S (if you want iOS) or any other phone that floats your boat.

    I'm a guy that daily drives a Galaxy Nexus, so accusing me of iOS fanboyism isn't necessarily the most productive way of going about your day.
  • phillyry - Sunday, October 21, 2012 - link

    Yes!

    Well said Vivek.

    But ya, Apple should still have the pressure put on them. So, I could see how people might take it the wrong way. 'Cause it could seem like you're just like, "It's all good Apple, we'll just suck it up." When, in actuality, your ideas are as you stated here. As per the OP's rant, I definitely thought it was off-base but could see where he would draw that conclusion, as it came across that way to me too. And, perhaps like me, he has a hard time keeping track of who uses which phone from the podcasts.

    Again, well retorted though.
  • jiffylube1024 - Tuesday, October 16, 2012 - link

    You are seriously complaining about the depth the review went into on the anodizing
    process? You're reading a review of a product and you're complaining that you're being given more information? How about you just skip over that section if it doesn't interest you.

    I lol'ed that you called that kind of serious scientific investigation into the anodizing process (which I found incredibly informative) "pathetic". Real, fact-based journalism apparently bores you; you'd just rather read opinion pieces and pass judgment on them. How high minded of you!

    Other reviews don't even mention anything about the anodizing process other than that it's there. I don't get why you'd even bother reading a review on AnandTECH if you don't care about the technology...

    As for the author's position to "deal with it" (the anodization scratch issue) -- what more can the author do? He can't fix the problem or even address it from a manufacturing standpoint. The review points out the issues with it; the decision making process is up to the consumer and the fixing of the problem is up to the manufacturer.
  • GotThumbs - Wednesday, October 17, 2012 - link

    "Other reviews don't even mention anything about the anodizing process other than that it's there. I don't get why you'd even bother reading a review on AnandTECH if you don't care about the technology..."

    Anodizing a piece of aluminum does not constitute "technology" when compared to the design of a SoC or camera, at least in my opinion. I see it as a finishing process. My point is that a side link to more detailed information on the anodizing process would have sufficed and kept the reader on track with the hardware review.

    I visit Anandtech on a daily basis and have been reading/visiting this site from the early years when Anand was still in High School. I thoroughly enjoy reading/learning about how new technologies in hardware are evolving and when they are compared to other current hardware available in the marketplace. But I feel there has been a growing tendency in Apple product reviews to have a hint of personal/emotional input rather than sticking to an analytical/technical assessment and let each reader digest the information without the personal emotional spin. It's like todays "News" casters interjecting thier personal thoughts/opinions on a news story. I prefer to get the facts and come to my own conclusion.

    In case you haven't realized, more and more in todays society, we are "Marketed to" in ways that are growing exponentially. Todays marketing companies continue to market to us using methods not just like Product Placement in TV shows, Reality shows, Movies, Red Carpet runways. etc., but on FB, Twitter, blogs, and weak "tech reviews" like CNN's (Read more like product ads than a review) etc. Because of this bombardment of marketing from every possible source imaginable and newly evolving, I don't think its wrong to call out a reviewer when I feel there is even a whiff of non-neutrality. They can take it with a grain of salt or ponder on their next review to be sure they are approaching it in a clear and unbiased manner.

    Complacency in a society and lowering on one's expectations is not something to embrace, its to be challenged and called out.

    Listen, no one is perfect and yes I may have been a little high strung in my post, but it was fueled by emotion and passion and I won't apologize for that.

    I do apologize to Vivek Gowri if I offended him in any way. It was not my intent.

    Best wishes

Log in

Don't have an account? Sign up now