This year has seen a revitalized Dell aggressively attacking HP on the enterprise workstation front. While HP has been content to recycle last year's models, Dell has made substantial strides in improving their desktop workstation offerings across the board. We had a chance to check out their T3600 this year and found it to be a demonstratively superior offering to the competing HP Z420, and today we have the T1650, a model that updates the lackluster T1600 with a new chassis and some new hardware.

In addition to being our first look at Dell's new entry level workstation, this is also our first look at Intel's new Ivy Bridge based Xeons. While the improvements from Sandy Bridge were underwhelming for enthusiasts and incremental for desktop-using consumers, on the enterprise side the combination of reduced power and thermal envelopes and increased IPC make Ivy Bridge a much, much better value proposition.

Dell outfitted our review system pretty close to as fast as it can get; we have the fastest video card option, the second fastest CPU option, and middle-of-the-road storage and memory options. You can get pretty close to it with their $1,679 top-end preconfigured machine, but our system does have some notable differences.

Dell Precision T1650 Specifications
Chassis Dell Custom
Processor Intel Xeon E3-1280 v2
(4x3.6GHz + HTT, Turbo to 4GHz, 32nm, 8MB L3, 69W)
Motherboard Dell Custom with C216 Chipset
Memory 2x4GB Micron Non-ECC DDR3-1600 (max 4x8GB ECC)
Graphics NVIDIA Quadro 2000 1GB GDDR5
(192 CUDA cores, 625MHz/1250MHz/2.6GHz core/shaders/memory, 128-bit memory bus)
Hard Drive(s) 2x Seagate Barracuda 7200.12 500GB 7200RPM SATA 6Gbps HDD in Striped RAID
Optical Drive(s) PLDS DVD-ROM DH-16D6S
Power Supply Dell Custom 80 Plus Gold
Networking Intel 82579LM Gigabit Ethernet
Audio Realtek ALC269
Speaker and mic/line-in jacks
Front Side Optical drive
2x USB 2.0
2x USB 3.0
Headphone and mic jacks
Top -
Back Side PS/2 keyboard and mouse ports
4x USB 2.0
2x USB 3.0
2x DisplayPort (disabled)
Ethernet
Serial
VGA (disabled)
Headphone and mic/line-in jacks
DVI-D (Quadro)
2x DisplayPort (Quadro)
Operating System Windows 7 Professional 64-bit SP1
Extras 80 Plus Gold power supply
USB 3.0
vPro
Warranty 3-year parts and 3-year on-site service
Pricing Starting at: $549
Price as configured: $2,790

Our review configuration is on the quirky side (as they often are), but I do want to draw your attention to the Intel Xeon E3-1280 v2. While I'm not a fan of Intel's branding, with the "v2" designating an Ivy Bridge core, it's not really that much more nonsensical than any of their other branding. What we do get is a CPU without an IGP (thus subtracting 8W off of the TDP) but more interestingly, a CPU that actually turbos up to 4GHz on a single core. None of their desktop chips thus far have scraped the 4GHz barrier, but this Xeon can hit it and the next one up on the ladder can even hit 4.1GHz. Ultimately what we have here is what should wind up being the fastest single-threaded processor we've tested and a very respectable one under multi-threaded situations (though undoubtedly inadequate compared to the hexa- and octo-core Xeons we've tested).

The updated C216 chipset brings to the table the same difference Intel brought to consumer desktops jumping from the 6 to 7 series chipsets: USB 3.0 support. All four of the C216's USB 3.0 ports are accounted for, with two on the front of the chassis (along with two USB 2.0 ports) and two on the rear.

Handling graphics duties is the stalwart NVIDIA Quadro 2000, and that's as fast as it gets for the T1650. The system is only designed to support cards up to 75W (meaning no PCIe power connector), and the remaining graphics options are fairly underwhelming. AMD's new GCN-based workstation cards are unavailable; the fastest FirePro available is still using a Turks core. As a refresher, the Quadro 2000 is essentially a cut-down GF106 (GeForce GTS 450); it features all 192 CUDA cores, but the memory bus remains at 128-bit and all of the clocks have been reduced to conserve power.

Dell continues to employ a RAID 0 as a cost efficient means of increasing storage throughput without resorting to SSDs. Our review unit only features a DVD-ROM, but since we never use the optical drive in testing anyhow it's no great loss, and the upgrade to a DVD writer is a moderately inexpensive one.

All in all, the T1650 is as basic as Dell's Precision workstations get, but already I'm a bit uneasy. The chassis definitely has the stylistic improvements of its bigger brothers, but as you'll see in the build section, it seems some corners were cut to get the T1650 down to its low starting price.

Application and Futuremark Performance
POST A COMMENT

38 Comments

View All Comments

  • cknobman - Tuesday, July 31, 2012 - link

    That is one BFUGLY case!!!!

    Where do these designers come up with this stuff?
    Reply
  • Gunbuster - Tuesday, July 31, 2012 - link

    Indeed. Paying the "Workstation" markup they could have at least made it look good like the older Precision boxes. Reply
  • Urbanos - Wednesday, August 01, 2012 - link

    why no E5-1600 cpu's in the comparison? Reply
  • cwpippin - Wednesday, August 01, 2012 - link

    Does anyone see the resemblance to the IBM ThinkCenter workstations? Man, these are fugly machines. Good thing we are buying performance, not looks.
    (http://stoutey.com/?attachment_id=237)
    Reply
  • Valutin - Thursday, August 02, 2012 - link

    Good machine, the Ivy-bridge goodness allows for a boost in performance.

    But as a few pointed out, ECC is a must for a CAD workstation and for some critical work.
    It slightly impacts performance.
    On our side, we still opted for several 3D workstations without it as we wanted to increase productivity with overclocking.

    I am just surprised by some comments, it's obvious that 2700 USD for a box is expensive, but for a Xeon+quadro 2000 set-up and all the ISV certification behind, that's quite in line and you don't buy this kind of stuff for general ledger work...

    One point Coming standard is also the 3 years on-site warranty (at least from our side of the world), which is nice to have from a business point of view.

    I was expecting that Dell would have update the flow of their machine but it appears that either the flow was already great, either price reduction was too aggressive on that one.
    I still prefer the SFF in IBM and HP's line, they better fit my vision of small CAD box. :)
    Reply
  • canyon.mid - Thursday, August 02, 2012 - link

    Compilation benchmarks? Reply
  • slickdoors - Sunday, August 12, 2012 - link

    i bought one the Dell Alienware R3-5507 Aurora R3 Desktop PC (Intel Core i7 2600 3.4GHz, 8GB, 2TB, DVDRW, Windows 7 Home Premium 64 bit) from slickdoors in shenzhen China. hope Windows 8 will coming soon. Reply
  • Stupid and new - Wednesday, May 15, 2013 - link

    These machines are a total waste of money. I have a T7600, cost $5500. The absurdly expensive processor in these things suck for 3D modeling. They don't offer a i7 option. I bought $800 pc from Micro Center with a solidstate and i7, put a the same graphics card in it which cost $400 and it runs circles around my T7600. I build it for a co-worker when his office machine died. I felt like a dumbass after that. The key 3d modeling with any type of engineering software is, the programs only support 1 processor. The, the i7 processors are a steal on every level even rendering were the it utilizes all cores. On a side note, I own a M6600 with an i7 for personal use and it is smoking fast, couldn't be happier with it. Reply

Log in

Don't have an account? Sign up now