Intel's Ivy Bridge: An HTPC Perspective
by Ganesh T S on April 23, 2012 12:01 PM EST- Posted in
- Home Theater
- Intel
- HTPC
- Ivy Bridge
Before proceeding to the business end of the review, let us take a look at some power consumption numbers. The G.Skill ECO RAM was set to DDR3 1600 during the measurements. We measured the average power drawn at the wall under different conditions. In the table below, the Blu-ray movie from the optical disk was played using CyberLink PowerDVD 12. The Prime95 + Furmark benchmark was run for 1 hour before any measurements were taken. The MKVs were played back from a NAS attached to the network. The testbed itself was connected to a GbE switch (as was the NAS). In all cases, a wireless keyboard and mouse were connected to the testbed.
| Ivy Bridge HTPC Power Consumption | |
| Idle | 37.7 W |
| Prime95 + Furmark (Full loading) | 127.1 W |
| Blu-ray from optical drive | 57.6 W |
| 1080p24 MKV Playback (MPC-HC + QuickSync + EVR-CP) | 47.1 W |
| 1080p24 MKV Playback (MPC-HC + QuickSync + madVR) | 49.8 W |
The Ivy Bridge platform ticks all the checkboxes for the average HTPC user. Setting up MPC-HC with LAV Filters was a walk in the park. With good and stable support for DXVA2 APIs in the drivers, even softwares like XBMC can take advantage of the GPU's capabilities. The QuickSync decoder and DXVA decoder are equally efficient, and essential video processing steps such as cadence detection and deinterlacing work beautifully
For advanced users, the GPU is capable of supporting madVR for most usage scenarios even with slow memory in the system. With fast, low-latency DRAM, it is even possible that madVR can be used as a renderer for the most complicated streams. More investigation needs to be carried out to check the GPU's performance under different madVR algorithms, but the initial results appear very promising.
Does this signify the end of the road for the discrete HTPC GPU? Unfortunately, that is not the case. The Ivy Bridge platform is indeed a HTPC dream come true, but it is not future proof. While Intel will end up pleasing a large HTPC audience with Ivy Bridge, there are still a number of areas which Intel seems to have overlooked:
- Despite the rising popularity of 10-bit H.264 encodes, the GPU doesn't seem to support decoding them in hardware. That said, software decoding of 1080p 10-bit H.264 is not complex enough to overwhelm the i7-3770K (but, that may not be true for the lower end CPUs).
- The video industry is pushing 4K and it makes more sense to a lot of people compared to the 3D push. 4K will see a much faster rate of adoption compared to 3D, but Ivy Bridge seems to have missed the boat here. AMD's Southern Islands as well as NVIDIA's Kepler GPUs support 4K output over HDMI, but none of the current motherboards for Ivy Bridge CPUs support 4K over HDMI.
- It is not clear whether the Ivy Bridge GPU supports decode of 4K H.264 clips. With the current drivers and LAV Filter implementation, 4K clips were decoded in software mode. This could easily be fixed through a driver / software update. In any case, without the ability to drive a 4K display, the capability would be of limited use.
Discrete HTPC GPUs are necessary only if one has plans to upgrade to 4K in the near term. Otherwise, the Ivy Bridge platform has everything that a HTPC user would ever need.
Facebook
Twitter
RSS
70 Comments
View All Comments
ganeshts - Tuesday, April 24, 2012 - link
The FSE mode performed visibly worse for me compared to FSW in the few cases that I tried. I have got the rest of the settings that Andrew @ MR used. I may try it and see if it improves things. My aim was to get madVR to render without any dropped frames, and I was able to get that at DDR3-1600 (which is what Andrew used too) for almost all the clips I had (except 720p60, which I didn't try till yesterday).satish0072001 - Tuesday, April 24, 2012 - link
Video decoding and rendering benchmarksCan you provide the learning guide how you've got those scores? It will be very helpful for some of us... I know about hqv score.. but this one is new to me.. kindly help :)
From where can I get these benchmarks if i have to compare my existing system with the IVB results?
LuckyKnight - Tuesday, April 24, 2012 - link
In the article there is a promise of a BIOS update to fix the 23.97Hz issue. Wasn't something similar also promised for sandy bridge in the same article over a year ago!! That never happened did it. I want to build a HTPC already!ganeshts - Tuesday, April 24, 2012 - link
Well, something did happen with SNB.. they got it to 23.972 Hz :) If you think about it, video cards with AMD and NVIDIA GPUs also end up in the 23.974 - 23.978 range, and only very rarely do I actually see a GPU outputting exactly 23.976023976 Hz.If Intel gets between 23.974 - 23.978 in a stable manner, I will consider the matter closed.
Shaggie - Thursday, April 26, 2012 - link
Is there still the problem like with SB that the driver puts color space to limited range when connecting to the tv with HDMI and resets it with every refresh rate switch/reboot with the integrated graphics?Stabgotham - Monday, April 30, 2012 - link
Is there a point to getting an H77 board with Ivy Bridge if all you are using it for is as an HTPC (sans overclock)? I can't tell what the benefit would be to justify the price increase.crisliv - Wednesday, June 13, 2012 - link
Nice article! As always.About the note:
"The good news is that Intel is claiming that this issue is fully resolved in the latest production BIOS on their motherboard. This means that BIOS updates to the current boards from other manufacturers should also get the fix. Hopefully, we should be able to independently test and confirm this soon."
What does it mean exactly? Does it mean that this BIOS update should get refresh rate closer to the 23.976 than it was in your test? And "on their motherboard" - does it mean that this BIOS update is for Intel MB only?
True that in AMD and nVidia the out of the box refresh rate for 23 is never precisely 23.976, but the custom timings on nVidia allows you to get closer to is. There is no custom timing settings on the HD4000, right?
LuckyKnight - Thursday, June 14, 2012 - link
Do we have an update regarding 23.967hz?theboyknowsclass - Tuesday, July 24, 2012 - link
it's been a while, and couldn't find any follow upHdale85 - Thursday, August 23, 2012 - link
I've been looking at an Ivy Bridge setup with the H77/Z77 chipset but I can't find any information about the audio support? Can it bitstream TrueHD and DTS-HD tracks? The older chipsets do it so I would find it strange that the new ones don't, but I don't see it mentioned on any of the new boards or in the intel information.