NEC PA271W - Display Uniformity

As we’ve mentioned, NEC goes to great lengths with their PA271W display to make it as uniform as possible. With the sacrifices in maximum light output we hope that we will see a measurable difference on the NEC in both brightness and color uniformity.

The brightness uniformity chart shows results that are far and away the best I have measured to date. The total deviation from the maximum to the minimum value is only 10 nits, and we are used to seeing a swing of 30 or even more nits on this test. The average deviation is only 1.66%, so this is a really fantastic result showing that NEC has managed to engineer a more uniformly bright panel than anyone else.

Measuring the black uniformity is harder, as we have no 200 nits target that the white uniformity has. In this case we wind up with an average black level of 0.35 nits, but a higher standard deviation of 18.7%. The issues fall in the upper-right area of the screen which also had the brightest areas in the white uniformity testing, so there might be a little more light leakage coming in from that area of the panel it seems. Note that this non-uniformity will likely vary by panel as well. Given that the panel is uniformly lit, and that affects the color accuracy to a great deal, I would expect the panel to have a fairly consistent dE across the display.

LCD Color Uniformity

The NEC delivers here again. We wind up with average and median dE values of 1.84 and 1.81, and a standard deviation of only 0.27 dE. The upper right corner seems to have a bit of an issue again, likely due to that lighting uniformity issue, but the rest of the panel is remarkably close together. The colors are all uniform in error across the screen and the issue seems to be a slight rise in grayscale error as you move away from the center. Compared to any other panel I have reviewed, the NEC is far more uniform and will exhibit less of a color shift across the unit, which is important on a screen this size. It still isn’t perfect by any means, but it’s better than anything else I have tested.

I also realized with this review that the vertical axis here was shifting between each review, so I’m going to keep this at 8 for this review, and then see going forward if that is correct. This will make it easier to compare across different displays.

NEC PA271W - Color Quality and Color Gamut NEC PA271W - Input Lag and Power Use
Comments Locked

69 Comments

View All Comments

  • sviola - Wednesday, May 2, 2012 - link

    If it wasn't for LCDs, probably no one would have monitors/tvs bigger than 30" (and a CRT that size was huge and extremely heavy).
  • DanNeely - Wednesday, May 2, 2012 - link

    Rear projection TVs got into the 50/60" class.
  • Mumrik - Wednesday, May 2, 2012 - link

    And 32" was the standard size for a widescreen TV in the living room around here...
  • ctbaars - Wednesday, May 2, 2012 - link

    I remember the same kind of argument when we went from Vinyl to CD :/ I'm not quite buying it.
  • Mumrik - Wednesday, May 2, 2012 - link

    I'm still using a Sony FW900.

    To be honest, it's not in tip-top shape anymore - the picture could be sharper. I had hoped to be able to use it until OLED arrived in the mainstream (as it was supposed to do YEARS ago). At this point I'm starting to consider 24-27" IPS panels.
  • JohnMD1022 - Wednesday, May 2, 2012 - link

    My NEC Multisync FE992 still performs flawlessly.

    When it begins to fail, I'll replace it.

    Meanwhile, with each passing day, LCD technology improves and prices drop. :)
  • futrtrubl - Tuesday, May 1, 2012 - link

    The numbers seem off for a couple of the displays with their minimum brightness settings drawing MORE power. That's the two NECs, the Apple and a Dell and BenQ.
  • JarredWalton - Tuesday, May 1, 2012 - link

    You are correct, sir! I've updated the chart so that the colors and min/max values are now correct.
  • cheinonen - Tuesday, May 1, 2012 - link

    Sorry about that, they got flipped in a version of the spreadsheet I use for the numbers and I thought they were fixed in the most recent one, but I'll update that again so it doesn't happen next time.
  • asasa45454 - Tuesday, May 1, 2012 - link

    Are you going to review them? They have input lag ~10ms, 2560x1440.

Log in

Don't have an account? Sign up now