Fractal Design Core 1000: How Little is Too Little
by Dustin Sklavos on April 13, 2012 11:35 AM EST- Posted in
- Cases/Cooling/PSUs
- MicroATX
- Mini-Tower
- Fractal Design
Noise and Thermal Testing, Stock
Obviously, looking at our charts this isn't going to be a particularly fair fight for the Fractal Design Core 1000. That's an unfortunate product of the gradual process of building up test results with the recently refreshed testbed. With that said, the Core 1000 does benefit from a positive-pressure cooling design that we've seen prove very effective in the past, and it's at least interesting to see how much performance you lose by going with a smaller, extreme budget enclosure.
Ambient temperatures during testing with the Core 1000 were between 22.8C and 23.2C, in line with the ambient temperatures the other cases were tested under.
Thermal performance for the major components is, thus far, roughly comparable to Corsair's much more expensive Obsidian 550D. Note, however, that the 550D is a larger enclosure with far less ventilation and a much more specific thermal and acoustic design than the Core 1000. SSD thermals aren't stellar, but they're not actually horrible either. A 3.5" drive will be more apt to experience some of the intake fan's airflow; the 2.5" drive is simply too flat to catch any (and really, the SSD doesn't need to stay that cool).
Once again the Core 1000's fan speeds are offering performance roughly comparable to the more expensive Corsair 550D, but look at the noise levels. While idling both enclosures are at the noise floor of our sound meter, but under load the 550D is far more graceful. That's what you're spending the extra money for. There's no way around it: the Core 1000, even at stock settings, is noisy, and the gulf between fan speeds on the Core 1000 and Antec Eleven Hundred demonstrates that the less expensive enclosure also doesn't have anywhere near as much thermal headroom to work with. Which brings us to the overclocked results....
Facebook
Twitter
RSS
53 Comments
View All Comments
tambok2012 - Saturday, April 14, 2012 - link
I just got this pictures from our country philippineshttp://www.tipidpc.com/viewtopic.php?tid=261886&am...
mariush - Saturday, April 14, 2012 - link
Our Cooler Master Hyper 212 Evo is by no means [..], but its 159mm height caused the tops of the heatpipes to press against the side panel, bowing it outward a little.Yeah, because someone who buys a $40-45 dollar case is obviously going to to buy a $30 cpu cooler when the retail processor come with a perfectly good stock cooler.
How out of touch can some reviewers become...
This is not a case designed for overclockers, no need for special coolers, the stock ones are fine for regular users.
The only flaw I see is the small cage. A 4-5 unit one would meet more users' needs.
stoggy - Saturday, April 14, 2012 - link
how disconnected? He is using a downward facing PS, in a top slot. That will severily reduce his ability to overclock too, extra heat.Lesson to learn, Its easier to cool more heat in a smaller space then it is to cool less heat in a greater space. Google it, check in Heating/AC, simple physics too.
Possible solutions for reviewers concerns:
1. Zip-Ties. We use to use them. Back when case mods ment saws and drills.
2. Proper Power supply
3. Grinder to lower the heat pipes, this might not be enough though, In which case i would suggest a drill. Probably with a 1/4" bit.
4. Growing a pair.
5. Have fun.
JarredWalton - Saturday, April 14, 2012 - link
"This is not a case designed for overclockers, no need for special coolers, the stock ones are fine for regular users."Speaking of being out of touch, who are you to say what a case is or isn't supposed to support? This is a review, and the point about the CPU cooler is exactly that: if you happen to be the type of user that has or plans to purchase an aftermarket cooler, the case has some cooler height limitations. That's useful information, and there are many (MANY) people that read AnandTech that are hardware enthusiasts who overclock just about every PC they own.
Your comment is pretty much exactly what we've said: if you plan on a moderate config running stock, the case will work fine. Then again, if you're doing that, just about ANY case will work fine. If we tested with the stock Intel HSF, however, we'd be adding noise and reducing cooling efficiency, all in the name of saving $30. The same people that won't want to buy a superior $30 cooler also won't want to buy an i7-2700K, or an SSD, or a GTX 560 GPU, etc. We test with a higher end setup along with overclocked settings because if that will work in a case, then everything lower spec will also work.
mariush - Saturday, April 14, 2012 - link
"...however, we'd be adding noise and reducing cooling efficiency, all in the name of saving $30"That's EXACTLY what most users buying this case did, give up features commonly found on larger cases to save 20-30$.
The stock Intel and AMD coolers are not exactly low quality ones. Users can actually perform a reasonable overclocking with them - they don't HAVE TO buy a better cooler just to overclock.
In such a small case, even with good coolers the cooling efficiency will be reduced. By the time you add a large video card and the large cpu heatsink into this case, you'll barely have any airflow at all.
So coupling this case with high performance after market cooler doesn't really make sense, and by writing it out you make it seem like a flaw, instead of something obvious.
For a real world example, why would I pay 40$ for this case, then pay 30$ for an aftermarket cooler, when I could just as well pay 60$ for an Antec Three Hundred case that comes from the start with a 140mm top fan and a 120mm side fan, has more "slots" for 120mm fans and better airflow due to the power supply being mounted at the bottom?
The Antec 300 case coupled with a stock CPU cooler will almost definitely keep the processor cooler, compared to a large cooler in a crowded Fractal Design case.
samoya22 - Sunday, April 15, 2012 - link
The Antec 300!Oh, wait...that's not the...?
UltraTech79 - Sunday, April 15, 2012 - link
I spent 29.99 at compUSA about 8 yerars ago for a better case AND it came with a freakn 250W power supply that has not exploaded and killed anyone yet! (parents low power comp)This think is pure junk. Whats with the mesh in front? Why try and get fancy with limited funds? Stick with the basics. And a vent on the side? REALLY? If you fucking have a system that needs that extra kind of cooling, you sure as fuck have the money to toss $30 more at a case.
UltraTech79 - Sunday, April 15, 2012 - link
Already found a far supirior case for 10$ more. Free shipping. Why was this ugly piece of junk even reviewed??http://www.newegg.com/Product/Product.aspx?Item=N8...
This guy is only 20$ ! And its still better!
http://www.newegg.com/Product/Product.aspx?Item=N8...
Mugur - Monday, April 16, 2012 - link
I don't think they are in the same class. Frankly I consider the case reviewed great for an inexpensive mATX build. And I'm sure that there are a lot of ugly tin and plastic 20$ cases... :-)GPCustomPC - Wednesday, April 25, 2012 - link
Does the Cooler Master Hyper 212 Evo really fit inside this case? It states 150mm of clearance and the EVO is said to be 159mm.