Inside the Vertex 4

At a high level, Everest 2 is architecturally very similar to its predecessor. The SoC is still built on a 65nm G process and maintains the same basic architecture. Clock speeds are up now from 333MHz to 400MHz. There are also microarchitectural tweaks at work here – limits in Everest 1 have since been removed for Everest 2. Everest 2's sequencer is much improved, but getting more detail than this is basically impossible.


Everest 1's Block Diagram, Similar to Everest 2

Just as with previous OCZ drives, the Vertex 4 ships with its own custom designed PCB. Unlike most SSDs we've seen, the Vertex 4 places its Everest 2 controller in the center of the PCB – with NAND fanning out in a circle around it. The Indilinx SoC uses the drive housing as a heatsink as two thermal pads help conduct the heat away from the chip:


OCZ Vertex 4 512GB

In the 512GB version we find quad-die packaged Intel 25nm synchronous MLC NAND devices, sixteen of them in total. The 256GB version keeps the same number of devices but drops the die count per package from 4 to 2. Despite launching with Intel NAND, OCZ claims broad support for Flash from other vendors. Touting that advantage really only matters if there's cheaper NAND available on the market, today Intel NAND is still priced competitively enough to make it an obvious fit.


OCZ Vertex 4 512GB

OCZ is currently testing 20nm Intel NAND and 24nm Toggle Mode NAND with the Everest 2. Both are functional at this point, but neither is optimized in the current firmware. Should Toggle Mode NAND pricing or performance offer a measurable advantage, OCZ will introduce a separate product based on it. Currently, low-density 24nm Toggle NAND isn't price competitive and thus it's not used at launch. OCZ did add that a 1TB Vertex 4 would almost certainly use Toggle NAND as Toshiba's high-density pricing (64GB, octal die packages) is better than from IMFT these days. We're still at least a quarter away from seeing 20nm NAND used in volume, so enabling support for either of these options will require a firmware update.
With its sights fixed on OEMs, OCZ is far more concerned about drive longevity than it once was. OEMs don't like having to re-qualify components, they want a steady supply of the same product for the lifespan of whatever system they're selling. If a system is shipping to a government buyer, that lifespan can be extremely long. As a result, OCZ wanted to build a controller that was as forward looking as possible. Everest 2 needed to be able to migrate to 20nm without requiring another qualification pass from OCZ's customers. As NAND cell sizes shrink, error rates go up. Only so much can be dealt with at the NAND factory, the controller is extremely important to maintaining data validity.

The original Octane could correct up to 78 random bits for every 1KB of data using its BCH ECC engine. While that was more than sufficient for 25nm NAND, OCZ is planning for the future with Everest 2 and implemented a more robust ECC engine capable of correcting up to 128 random bits for every 1KB of data. OCZ believes the Everest 2's ECC capabilities are enough to ensure reliable operation with 20nm IMFT NAND and perhaps the first 1x-nm IMFT NAND as well. For consumers however, this has no bearing on the Vertex 4's performance/reliability as a drive today (Octane's ECC engine was enough).

1GB of DDR3-800 On-Board

The Everest 2 controller is flanked by a 512MB Micron DDR3-800 DRAM. Another 512MB chip exists on the flip side of the PCB bringing the total to a whopping 1GB of DDR3 memory on-board. OCZ makes no effort to hide the DRAM's purpose: Everest 2 will prefetch read requests from NAND into DRAM for quick servicing to the host. When serviced from DRAM, reads should complete as fast as the interface will allow it – in other words, the limit is the 6Gbps SATA interface, not the SSD.


OCZ Vertex 4 256GB

In order to get 128GB, 256GB and 512GB drives to market as quickly as possible, OCZ is shipping them all with 1GB of DRAM on-board. The 128GB and 256GB drives simply won't use all of the DRAM however. A future revision of the Vertex 4 will pair the 128/256GB drives with 512MB of memory instead to save on costs.


OCZ Vertex 4 256GB

The amount of memory bandwidth offered to the Everest 2 controller is insane – we're talking about 3.2GB/s, as much as many modern day smartphone SoCs, and as much as a desktop PC had a decade ago.

OCZ wouldn't tell me if the costs of shipping 1GB of DDR3 memory outweigh the savings from not having to pay SandForce for silicon anymore. Even though it owns Indilinx, R&D and manufacturing aren't free. All of that factored in, the cost of the Everest 2 controller is likely cheaper than SandForce's 2281, but it's not clear to me if the added cost of DRAM offsets that gap. None of this matters to end users, but it's an interesting discussion regardless. OCZ will have to deliver aggressive pricing regardless of its internal cost structure.

AES-256 Encryption

Similar to the Octane/Everest 1, all data written to NAND in the Vertex 4 goes through Everest 2's 256-bit AES encryption engine. Modern SSDs scramble data before writing to NAND to begin with (certain data patterns are more prone to errors in flash than others) and encryption offers security benefits in addition to working as a good scrambling engine. If you're going to support scrambling, the jump to enabling encryption isn't all that far.

Similar to other SSDs, the Vertex 4's encryption key is generated randomly at the factory. Unfortunately, also similar to other SSDs, there's no client facing tool to reset or manage the key. I believe the key is regenerated upon a secure erase and it can be tied to an ATA password, however what I'd really like to see is the bundling of a software package that can allow users to generate a new key and require a password at boot (not all ATA password implementations are super secure). I know there are third party applications that offer this functionality today, but I'd like to see something ship with one of these FDE drives by default so more consumers can actually use the feature. There's no point to having a self encrypting drive that gives up your data as soon as you plug it in to another system. While I'm making requests, I'd also like to see a way for OS X users to take advantage of built in full disk encryption.

Ndurance 2.0 and a 5-year Warranty

With Everest 2 OCZ supports redundant NAND arrays, similar to the latest Intel and SandForce controllers. By including redundant NAND on-board, the drive could withstand the failure of more than a single die without any data loss. The Vertex 4 doesn't have OCZ's redundant NAND technology enabled, although the enterprise version of the drive (Intrepid 3) will likely turn it on.

OCZ is also doing some granular manipulation of voltages at the NAND level in order to get the most endurance out of these drives (not all NAND is created equally, adjusting to characteristics of individual NAND devices can lead to more p/e cycles out of the drive). While this isn't really a concern for 25nm NAND on the Vertex 4 today, it is likely a feature we'll see played up with the move to 20nm and for eMLC versions of the drive targeted at the enterprise.

Confidence in reliability is at an all-time high with the Vertex 4 as it ships with a 5-year warranty, up from 3 years with the Octane, Vertex 2 and Vertex 3.

Introduction Random Read/Write Speed
POST A COMMENT

126 Comments

View All Comments

  • vegemeister - Monday, May 07, 2012 - link

    As long as it's not too much RAM to write out before the energy in the caps runs out, it's not really a problem. Reply
  • 7Enigma - Wednesday, April 04, 2012 - link

    But you can show all these pretty specs and graphs but until you fix something like this catastrophe I will avoid your SSD's like the plague:

    Oh and what controller is in this beauty......Indilinx Everest!

    http://www.newegg.com/Product/Product.aspx?SID=PSa...
    Reply
  • Comdrpopnfresh - Wednesday, April 04, 2012 - link

    It's nice to see the AES-256 encryption on it. That'll come in handy when the drive dies and has to be sent back to OCZ.
    I have 2 vertex2's and a vertex3, all of which died, and I have yet to eat or rma- OCZ provides no way to fulfill the warranty without compromising the security of user data. Used to be a big fan of OCZ, and loved their ssds... until this situation arose THREE TIMES.
    Reply
  • vegemeister - Monday, May 07, 2012 - link

    Sure they do -- encrypt it yourself in software. Anyway, why would you trust OCZ not to be able to decrypt data encrypted by closed-source firmware designed by OCZ? Reply
  • Hurk - Wednesday, April 04, 2012 - link

    where is the data for the 128gb version? it will be significantly different from the 256/512, and since im really loving SSD caching on new system builds, the smaller drive is more important to see the numbers for than the 256/512 for me. Reply
  • Kristian Vättö - Wednesday, April 04, 2012 - link

    Manufacturers often send bigger capacities for reviews (they are the highest performing ones, after all). I'm sure there will be a 128GB review once we get one, which is hopefully sooner than later :-) Reply
  • Reikon - Wednesday, April 04, 2012 - link

    Nice referral link there. Reply
  • JarredWalton - Thursday, April 05, 2012 - link

    No worries -- they've been marked as spam and are gone now. Let this serve as a warning to others: if you try to put in a referral link in a comment and we mark you as spam, all your comments go bye bye! Reply
  • iceman98343 - Thursday, April 05, 2012 - link

    sorry about that. c an you delete my last entry below. didn't see any TOS against referral links. Reply
  • Coup27 - Friday, April 06, 2012 - link

    For the uneducated, what is a referral link? Reply

Log in

Don't have an account? Sign up now