Fractal Design Define R3: A Fan Favorite Keeps the Noise Down
by Dustin Sklavos on November 11, 2011 1:22 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- Fractal Design
Noise and Thermal Testing, Overclocked
While I'm certain the R3 could handle our overclocked testbed with aplomb if its cooling system were modified, its stock configuration, geared more towards silence, does make things a bit more complicated. Still, modification to the cooling is an allowance Fractal Design offers that the NZXT H2 and to a lesser extent the Antec Solo II have trouble competing with.
CPU thermals are pretty poor and at least a little troubling (nobody wants to see cores running north of 90C), but again, the middle-of-the-road thermal performance elsewhere is justified by the silent running. A key point worth noticing, too, is the SSD temperatures recorded: the SSD is sitting behind an intake fan, and it's pretty clear that the R3 is able to pull in plenty of cool outside air through the ventilation in the sides of the front panel. Fractal Design dodged the bullet that mortally wounded NZXT's H2. I suspect a pair of SilverStone AP120s would go a long way towards improving thermals while still keeping a pretty quiet noise profile.
Unfortunately, while the R3's able to keep things quiet at idle, under load the case and CPU fans have to work overtime and the Solo II and H2 steal the lead. Still, performance isn't necessarily that bad here and again, the R3 has room to grow.
Facebook
Twitter
RSS
83 Comments
View All Comments
ven - Friday, November 11, 2011 - link
If anybody wants ever more silent PC take a look at the CM silencio 550.Great look i was stunned by the mirror finish front panel of that case(yes of course that means more prone to scratches and finger prints).Only thing it lacks the R3 is by the fan count but that is not the problem for those who need a Ultimate silent PC if anybody decided there preference is silence then silencio will be a great option.And for those who has trade-of between silence and performance go for the R3.They both have same price range(95-110$)
piroroadkill - Friday, November 11, 2011 - link
Good call. Looks nice, and has a removable cage too, if you want a massive card.ven - Friday, November 11, 2011 - link
Yes, that's a nice option i like the silencio especially for that.And also silhouetted holes at rear of the case for water cooling making this case a solution for small,silent gaming ring.Dustin, check this case immediately it's a great competitor for R3.
For more information:
http://www.guru3d.com/article/cooler-master-silenc...
Peskarik - Saturday, November 12, 2011 - link
I looked at this case when I was choosing, also at Thermaltake Element S.Silencio does not have enough cooling expansion capacity.
ven - Friday, November 11, 2011 - link
sorry not front panel the front door i meant to refer.geniekid - Friday, November 11, 2011 - link
SPCR.com gives the nod to the R3 and the H2 over the Silencio, but it does note that the Silencio is cheaper than both (about $70 vs $100).http://www.silentpcreview.com/article1210-page8.ht...
I certainly wouldn't mind AT reviewing it though :)
Dustin Sklavos - Friday, November 11, 2011 - link
Cooler Master stuff is a bit harder to get in and honestly I wasn't impressed with the Silencio 550 when iBuyPower used it for their workstation, since it utterly failed to dampen hard drive noise.Peskarik - Saturday, November 12, 2011 - link
What about Thermaltake Element S? Especially the version with side fan?XiZeL - Friday, November 11, 2011 - link
Would a corsair H100 Fit well in this and would perform well?thinking about this case with a i5.2500k with reference 6950(blowing air out)
slacr - Friday, November 11, 2011 - link
Fit, sortof.Fit well, no. I originally wanted to place a 2*120mm radiator in the roof of my case, but the top cutouts are 2*140 with fan mount holes for 120 in the middle of them. This results in a spacing between the two 120mm mounts being too far apart for standard radiator hole spacing. Trying to use a 2*140 radiator will place it too close to the motherboard. So in order to fit it properly in this case you have to make modifications.
They did adress the watercooling/H100 issue with a different case, the Arc, see link here: http://www.fractal-design.com/?view=product&pr...
I don't have any experience with that case though.