ASUS E35M1-M Pro Review - Anyone For Fusion?
by Brendan van Varik on October 25, 2011 5:00 AM EST- Posted in
- Asus
- Motherboards
- Fusion
- E-350
Board Features
| ASUS E35M1-M Pro | |
| Market Segment | HTPC |
| CPU Interface | FT1 BGA |
| CPU Support | Fusion |
| Chipset | Hudson-M1 (A50M) |
| Memory Slots |
Two DDR3 DIMM Maximum 8 GB Non-ECC Unbuffered |
| Expansion Slots |
1 x PCIe x16 (x4 speed) 1 x PCIe x1 2 x PCI |
| Onboard |
5 x SATA 6 Gbps Ports 1 x USB 3.0 header 4 x USB 2.0 headers 2 x Fan Headers 1 x Front Panel Audio Connector 1 x SPDIF Out Connector |
| Onboard LAN | Realtek® 8111E PCIe Gigabit LAN controller |
| Onboard Audio |
ALC892 8-Channel High Definition Audio CODEC Supports DTS Surround Sensation Ultra-PC |
| Power Connectors |
24-pin ATX Power Connector 4-pin 12V CPU Power Connector |
| Fan Headers |
1 x CPU (3-pin) 1 x CHA (3-pin) |
| IO Panel |
1 x PS/2 Port 2 x USB 3.0 4 x USB 2.0 1 x HDMI 1 x D-SUB 1 x DVI 1 x eSATA 6 Gbps 1 x Gigabit Ethernet 3 x Audio Jacks |
| BIOS Version | 0506 |
| Warranty Period | 3 Year |
With regards to the networking and sound processors, ASUS have used the Realtek solutions. It is normal to see the Realtek chips onboard on a motherboard within this price range, but ASUS do occasionally use the Intel solutions on their higher end motherboards.
In The Box
2x SATA 6 Gbps cables
IO shield
1x CPU fan
Users guide
Driver DVD
No USB 3.0 bracket has been supplied but instead of the two SATA 6 Gbps cables which the manual stated, we received four cables in the box.
Software
As the software found with this board has been covered by both Ian in his ASUS P8Z68 Pro review and by me in the ASUS P8P67 review, I will just give you a quick run through. The software installation was easy - you have the choice to install all of the software which comes on the DVD or you can install each individual driver as you please. In our case, all of the drivers were installed in order to allow for a fair test.
From within the ASUS Suite II, you can overclock your system, change and apply fan settings, monitor temperatures and voltages, change the power saving settings to your requirements as well as being able to update the BIOS. There are no issues with this software from what I can see.
Facebook
Twitter
RSS
66 Comments
View All Comments
Aries1470 - Thursday, October 27, 2011 - link
p.s. I Forgot to mention that although it is capable of blue-ray etc it is only a DX9 that they have paired it with. They did not use the other options that S3 provide for at least a DX10.1silverblue - Thursday, October 27, 2011 - link
Nano X2 is a very promising technology, but reviews (and comparisons) have been somewhat lacking thus far. Unlike the 65nm single core variants, these are 40nm, and from looking at them in comparison to the E-350 and Zacate, they're the fastest, if only slightly ahead of the AMD part. It would be good to see VIA and AMD do well in this market.There was a look here in the Brazos review:
http://www.anandtech.com/show/4134/the-brazos-revi...
There's a video here of the 4350's power consumption and video playback:
http://www.youtube.com/watch?v=5FI4ctKzGnQ
Here's one of the 4650 quad core variant:
http://www.youtube.com/watch?v=EXeROMRmqTA&fea...
Aries1470 - Sunday, October 30, 2011 - link
Hi silverblue,Just wanted to say thank you for the links. Would have been great in the brazos review if they also had the power consumption, not just how powerful it is ;-)
Great youtube links too.
Just didn't know that the Nano X2 was better than the Brazos. You hear all about AMD but nearly nothing about VIA.
UrQuan3 - Wednesday, November 9, 2011 - link
After Via sold S3 (their graphics group) I have heard very little from them. They had a good looking chipset in the works, but we probably won't see it now. I'm actually tempted to ask for one of the engineering samples like the one Anand reviewed.Finraziel - Monday, October 31, 2011 - link
Used this board's little mini-itx brother, the E35M1-I, in a build for my mom a while ago... Built into a mini-itx case with laptop power supply, a 500 GB WD Blue drive and a slimline DVD burner, along with one 120mm scythe fan (the slim version so it would fit), and it only used just over 20 watts in idle... Of course, it's not quite the same board, but I'm still guessing that 250 watt PSU is still pretty inefficient.My mom's completely happy with this system btw, she browses the web, plays some casual games, some minimal office work, and for that kind of usage this system offers plenty of power. Also with the 20-25 watt power draw, it doesn't matter that she never turns her PC off.
Harry Lloyd - Monday, October 31, 2011 - link
How come this board has eSATA, and NOT ONE FM1 board does?