I remember the speculation that lead up to Apple's iPad launch. The list of things everyone expected the device to do was absurd, and the theories on the architecture behind Apple's first branded SoC was just as fantastic. The simplest answer is sometimes the right one and as Ars Technica's Jon Stokes pointed out, the A4 was nothing more than a hardened ARM Cortex A8 core running at 1GHz in the iPad (and 800MHz in the iPhone 4).

The Cortex A8 is something we've covered extensively here so I won't go into great detail right now. It's a dual-issue, in-order architecture with a 13 stage integer pipeline and a non-pipelined FPU.

When Apple announced the iPad 2, it also briefly announced the A5 SoC. The only detail given? The A5 is a dual-core processor with a GPU that's 9x faster than what's in the A4.

There are only two recent ARM architectures that have multicore support: the ARM11 and the ARM Cortex A9. The A8 doesn't come in a multicore variant. Given how many other SoC vendors are shipping dual-core Cortex A9 SoCs, the A5 was likely no different than NVIDIA's Tegra 2, TI's OMAP 4 or Samsung's Exynos in that regard: armed with a pair of Cortex A9s running at 1GHz. Update: Geekbench reports clock speed at 900MHz. Update 2: Apple confirms 1GHz clock speed on the iPad 2 specs page.

Architecture Comparison
  ARM11 ARM Cortex A8 ARM Cortex A9 Qualcomm Scorpion
Issue Width single-issue dual-issue dual-issue dual-issue
Pipeline Depth 8 stages 13 stages 9 stages 13 stages
Out of Order Execution N N Y Partial
FPU Optional VFPv2 (not-pipelined) VFPv3 (not-pipelined) Optional VFPv3-D16 (pipelined) VFPv3 (pipelined)
NEON N/A Y (64-bit wide) Optional MPE (64-bit wide) Y (128-bit wide)
Process Technology 90nm 65nm/45nm 40nm 40nm
Typical Clock Speeds 412MHz 600MHz/1GHz 1GHz 1GHz

The Cortex A9 is similar to the A8 but with an out-of-order execution engine and a shallower pipeline (9 stages). The result is better-than-A8 performance at the same clock speed. The A9 also adds a fully pipelined FPU.

Now it's unclear what the rest of the A5 SoC looks like, but from the CPU standpoint I think it's safe to say that there are a pair of ARM Cortex A9s in there. We can look at the increase in Geekbench Floating Point scores for some proof:

Geekbench 2 - Floating Point Performance
  Apple iPad Apple iPad 2
Overall FP Score 456 915
Mandlebrot (single-threaded) 79.5 Mflops 279.1 Mflops
Mandlebrot (multi-threaded) 79.4 Mflops 554.7 Mflops
Dot Product (single-threaded) 245.7 Mflops 221.7 Mflops
Dot Product (multi-threaded) 247.2 Mflops 436.8 Mflops
LU Decomposition (single-threaded) 54.5 Mflops 205.4 Mflops
LU Decomposition (multi-threaded) 54.8 Mflops 421.6 Mflops
Primality Test (single-threaded) 71.2 Mflops 177.8 Mflops
Primality Test (multi-threaded) 69.3 Mflops 318.1 Mflops
Sharpen Image (single-threaded) 1.51 Mpixels/s 1.68 Mpixels/s
Sharpen Image (multi-threaded) 1.51 Mpixels/s 3.34 Mpixels/s
Blur Image (single-threaded) 760.2 Kpixels/s 665.5 Kpixels/s
Blur Image (multi-threaded) 753.2 Kpixels/s 1.32 Mpixels/s

Single threaded FPU performance is multiples of what we saw with the original iPad. This sort of an improvement in single-core performance is likely due to the pipelined Cortex A9 FPU. Looking at Linpack we see the same sort of huge improvement:

Linpack

Whether this performance advantage matters is another matter entirely. Although there aren't many FP intensive iPad apps available today, moving to the A5 is all about enabling developers - not playing catch up to software.

Memory size, bandwidth and operating frequencies are all unknowns that I was hoping to find out more about once I put hands on the iPad 2. Geekbench reports the iPad 2 at 512MB of memory, double the original iPad's 256MB. Remember that Apple has to deal with lower profit margins than it'd like with the iPad, but it refuses to cut corners on screen quality so something else has to give.

L2 cache size has also apparently increased from 512KB to 1MB. The L2 cache is shared among both cores and 1MB seems to be the sweet spot this generation.

Geekbench 2 - Memory Performance
  Apple iPad Apple iPad 2
Overall Memory Score 644 787
Read Sequential (single-threaded scalar) 340.6 MB/s 334.2 MB/s
Write Sequential (single-threaded scalar) 842.4 MB/s 1.07 GB/s
Stdlib Allocate (single-threaded scalar) 1.74 Mallocs/s 1.86 Mallocs/s
Stdlib Write (single-threaded scalar) 1.20 GB/s 2.30 GB/s
Stdlib Copy (single-threaded scalar) 740.6 MB/s 522.0 MB/s

Geekbench's memory tests show an improvement in effective bandwidth as well. The biggest improvement is in the stdlib write test which shows a near doubling of bandwidth from 1.2GB/s to 2.3GB/s. Unfortunately this isn't enough data to draw conclusions about bus width or DRAM operating frequency. Given the increases in CPU and GPU performance, an increase in memory bandwidth to go along with the two isn't surprising.

Geekbench shows a healthy increase in integer performance, both in single and multithreaded scenarios. The multithreaded advantage makes sense (two are better than one), but the lead in single threaded tests shows the benefit the A9 can deliver thanks to its shorter pipeline and ability to reorder instructions around stalls.

Geekbench 2 - Integer Performance
  Apple iPad Apple iPad 2
Overall FP Score 365 688
Blowfish (single-threaded) 13.9 MB/s 13.2 MB/s
Blowfish (multi-threaded) 14.3 MB/s 26.1 MB/s
Text Compression (single-threaded) 1.23 MB/s 1.50 MB/s
Text Compression (multi-threaded) 1.20 MB/s 2.82 MB/s
Text Decompression (single-threaded) 1.11 MB/s 2.09 MB/s
Text Decompression (multi-threaded) 1.08 MB/s 3.28 MB/s
Image Compress (single-threaded) 3.36 Mpixels/s 3.79 Mpixels/s
Image Compress (multi-threaded) 3.41 Mpixels/s 7.51 Mpixels/s
Image Decompress (single-threaded) 6.02 Mpixels/s 6.68 Mpixels/s
Image Decompress (multi-threaded) 5.98 Mpixels/s 13.1 Mpixels/s
Lua (single-threaded) 172.1 Knodes/s 273.4 Knodes/s
Lua (multi-threaded) 171.9 Knodes/s 542.9 Knodes/s

On average Geekbench shows a 31% increase in single threaded integer performance over the A4 in the original iPad. NVIDIA told me they saw a 20% increase in instructions executed per clock for the A9 vs. A8 and if we remove the one outlier (text decompression) that's about what we see here as well.

Geekbench 2
  Overall Integer FP Memory Stream
Apple iPad 448 365 456 644 325
Apple iPad 2 750 688 915 787 324

The increases in integer performance and memory bandwidth are likely what will have the largest impact on your experience. The fact that we're seeing big gains in single as well as multi-threaded workloads means the performance improvement should be universal across all CPU-bound apps.

What does all of this mean for performance in the real world? The iPad 2 is much faster than its predecessor. Let's start with our trusty javascript benchmarks: SunSpider and BrowserMark.

SunSpider Javascript Benchmark 0.9

Apple improved the Safari JavaScript engine in iOS 4.3, which right off the bat helped the original iPad become more competitive in this test. Even with both pads running iOS 4.3, the iPad 2 is 80% faster than the original iPad here.

The Motorola Xoom we recently reviewed scored a few percent slower than the iPad 2 in SunSpider as well. Running different OSes and browsers, it's difficult to conclude much when comparing the A5 to Tegra 2.

A bug in BrowserMark kept us from running it for the Xoom review but it's since been fixed. Again we're looking at mostly JavaScript performance here. Rightware modeled its benchmark after the JavaScript frameworks and functions used by websites like Facebook, Amazon and Gmail among others. The results are simply one aspect of web browsing performance, but an important one:

Rightware BrowserMark

The move from the A4 in the iPad 1 to the A5 in the iPad 2 boosts scores by 47%. More impressive however is just how much faster the Xoom is here. I suspect this has more to do with Google's software optimizations in the Honeycomb browser than hardware, but let's see how these tablets fare in our web page loading tests.

We debuted an early version of our 2011 web page loading tests in the Xoom review. Two things have changed since then: 1) iOS 4.3 came out, and 2) we changed our timing methods to produce more accurate results. It turns out that Honeycomb's browser was stopping our page load timer sooner than iOS', which resulted in some funny numbers when we got to the 4.3/Honeycomb comparison. To ensure accuracy we went back to timing by hand (each test was repeated at least 5 times and we present an average of the results). We also added two more pages to the test suite (Digg and Facebook).

2011 Page Load Test - Average

The iPad 2 generally loads web pages faster than the Xoom. On average it's a ~20% increase in performance. I wouldn't say that the improvement is necessarily noticeable when surfing most sites, but it's definitely measurable.

The move to iOS 4.3 really narrowed the gap between the original iPad and the Xoom. In some cases the two actually render pages in the same amount of time, however that's typically for lighter pages that are easy to render. Up the complexity and the Xoom easily distances itself from the original iPad.

2011 Page Load Test - AnandTech.com

2011 Page Load Test - Amazon.com

2011 Page Load Test - CNN.com

2011 Page Load Test - Digg.com

2011 Page Load Test - Engadget.com

2011 Page Load Test - Facebook.com

2011 Page Load Test - NYTimes.com

2011 Page Load Test - Reddit.com

We'll touch on this more in the full review but it's not all about performance when talking about web browsing between the iPad 2 and the Xoom. Although the iPad 2 may have faster render times on average, the Xoom still supports tabbed browsing which definitely has its advantages.

Introduction The GPU: PowerVR SGX 543MP2
POST A COMMENT

82 Comments

View All Comments

  • name99 - Saturday, March 12, 2011 - link

    Depends on what you mean by "properly".
    In the city iPad location services work astonishingly well. God knows how they do it, I guess the SkyHook database is just huge.
    On the other hand, if you plan to go hiking with your iPad, you might be disappointed.

    One way to test this (if you have a mac) is to see how well your mac provides location. Grab a location-aware app (google maps in Safari is an easy choice) and ask it to locate you. (Note that you need WiFi to be on for this to work usefully, so if you're doing it at a desktop mac, make sure WiFi is on.)

    If you have a portable, try it in a few different places. Are you happy with the results? Because that's about what you'll get from iPad without GPS.
    Reply
  • Mr Alpha - Saturday, March 12, 2011 - link

    I don't believe it can. According to another famous Steve Jobs email iOS doesn't support getting internet access via tethering. On the other hand iOS 4.3 added hotspot to iPhone 4, which you should be able to use to get internet to a WiFi only iPad. Reply
  • solgae1784 - Saturday, March 12, 2011 - link

    It looks like AT&T will allow iPad 3G to be used as a personal hotspot. Not sure about Verizon.

    http://www.att.com/gen/press-room?pid=19295&cd...
    Reply
  • ATC - Saturday, March 12, 2011 - link

    Yes you can. I have an iPhone 4 with 4.3 installed and with the new HotSpot feature of iOS 4.3 you can do just that. However, in the US my understanding is that you need a tethering data plan and AT&T or Verizon will charge you more to activate the HotSpot feature. Of course you can always get around that by JB your iPhone.

    I'm in Canada and the HotSpot feature works here for free and works great (I've been using it for the past 3 days to share my 6GB data with my iPhone). But there are a few things to consider when doing this. One, your iPhone's battery runs down much faster (it's using 3G data and Wifi at the same time). Second, while I haven't tested this, I think you lose location service/GPS on your iPad because only the 3G iPad has a GPS (I could be wrong though).
    Reply
  • 3DoubleD - Monday, March 14, 2011 - link

    I would be cautious here. I bought a Kindle with only WiFi thinking I could just tether to Android phone for internet access on the go... I was WRONG.

    In the case of the Kindle, the WiFi chip does not support connecting to non-router based wireless networks. So the Kindle cannot connect to any wireless network that you created with your phone, tablet, or laptop.

    So, the answer to your question is dependent on the wireless chipset used in the iPad. My recommendation is to find proof that someone has successfully tethered an iPhone with an iPad2 before wasting $800.
    Reply
  • silverblue - Saturday, March 12, 2011 - link

    Definite improvement there; can't wait for HDR and more shader effects such as bump mapping to appear in mobile games. I knew years ago that the SGX was capable of AA but it's not something we've really seen up until now.

    I wonder how much faster this implementation is as compared to the SGX540 found in Hummingbird?
    Reply
  • rish95 - Saturday, March 12, 2011 - link

    Well Imagination Tech says a dual core SGX543 is over 4X faster than the SGX 540.

    So even though the iPad is at 1024 x 768 you can still expect 60% higher frame rate, but the power per pixel is much higher.
    Reply
  • tipoo - Saturday, March 12, 2011 - link

    Well that's disappointing. I hardly expected it to replace a dedicated camera, but with an iPhone 4-ish camera and the processing power it has it could have allowed for some neat things. But if the camera sucks, meh.

    Also, whats that vintage camera shown in all the test shoots?
    Reply
  • Sarah_ - Saturday, March 12, 2011 - link

    It's a Kine-Exakta II, made in 1948 :)
    The one in the picture is not functional but it definitely looks cool!

    http://captjack.exaktaphile.com/Kine-Exakta%20II%2...
    Reply
  • tipoo - Wednesday, March 16, 2011 - link

    Thanks! Reply

Log in

Don't have an account? Sign up now