Mass Effect 2

Electronic Arts’ space-faring RPG is our Unreal Engine 3 game. While it doesn’t have a built in benchmark, it does let us force anti-aliasing through driver control panels, giving us a better idea of UE3’s performance at higher quality settings. Since we can’t use a recording/benchmark in ME2, we use FRAPS to record a short run.

Mass Effect 2’s results end up mirroring DIRT 2 here, which isn’t a good thing for AMD. Once again the 6990 has more in common with the 6950CF than it does the 6970CF, and overclocking will not solve the problem. Meanwhile NVIDIA easily takes the game with even the GTX 560 SLI. The one bright spot here is that the 6990’s advantage over the 5970 has recovered, pushing out to 21%.

DIRT 2 Wolfenstein
Comments Locked

130 Comments

View All Comments

  • Figaro56 - Tuesday, March 8, 2011 - link

    Just be prepared to upgrade your GPU every year. If you think they are going to stop leap frogging performance you are not being realistic.
  • san1s - Tuesday, March 8, 2011 - link

    "AMD even went so far as to suggest that reviewers not directly disassemble their 6990"
    The next picture: The card disassembled
    haha
  • Ryan Smith - Tuesday, March 8, 2011 - link

    To AMD's credit, they were good sports offered to take any pictures we needed. So all of those disassembled shots came from them. They were really adamant about it being a bad idea to take these things apart if you intended to use them in the future.
  • strikeback03 - Tuesday, March 8, 2011 - link

    I was looking for a comment on whether you did all your testing before disassembling or whether you got some of their super paste to reassemble.
  • 7Enigma - Tuesday, March 8, 2011 - link

    My problem with the shot is the poor application of thermal paste from the picture. In a card of this magnitude having a perfect coating of thermal compound is critical. And knowing marketing if that is the shot they SHOW, how good do you really think the application is on one purchased in retail channels?
  • iwod - Tuesday, March 8, 2011 - link

    I haven't been following CrossFire / SLI or these Single Card Dual GPU closely. ( Which to me are the same as two card anyway )

    Do they still need drivers to have a specific profile of the game to take advantage? I.e an Unknown Game to the Drivers will gain 0 benefits from the 2nd GPU?

    If that is so, then they are not even worth a look.
  • Figaro56 - Tuesday, March 8, 2011 - link

    Most of the big games support SLI and CrossfireX today. For example, I play Battlefield BC2 myself and using 2 video cards blows the doors of a single card and is well worth the investment, especially if you have a 2560x1600 resolution monitor like I do. For 2 ATI cards in Crossfire you install a separate crossfire profiles pack in addition to the catalyst drivers. The profiles pack supports all the game crossfire optimization. The AI mode in the catalyst drivers exploits the game profile pack setting for crossfire so you want that enabled.

    A dual GPU HD 6990 is essentially crossfire on a single card, but for some reason it doesn't perform as well as dual single GPU cards in crossfire. Go figure.

    If you play old games that don't support SLI or Crossfire then YES there is 0 gain. If you have not tried any of the new games what are you waiting for? It doesn't suck you know?!
  • cactusdog - Tuesday, March 8, 2011 - link

    I agree, unless you have eyefinity and one slot, paying a premium for heat and noise doesnt make sense. For most people with 1 screen a 6970 or 580 is more than enough.
  • Samus - Tuesday, March 8, 2011 - link

    i'd be shocked if they sold even one of these without it being returned at some point. the noise levels are astonishing. at full blast the thing doesn't even meet federal vehicle emissions noise regulations without being classified as a motorcycle!
  • MadAd - Tuesday, March 8, 2011 - link

    8%? where do we buy tubes of this phase change material? do they sell it like arctic silver?

Log in

Don't have an account? Sign up now