Dirt 2

Dirt 2 came to the PC in December 2009, developed by Codemasters with the EGO Engine. Resulting in favourable reviews, we use Dirt 2’s inbuilt benchmark under DirectX 11 to test the hardware. We test two different resolutions at two different quality settings, in single and dual GPU setups.

Dirt II - 1680x1050; High Quality; No AA

Dirt II - 1920x1080, Ultra, 8xAA

Metro 2033

Metro 2033 is the Crysis of the DirectX 11 world (or at least until Crysis 2 is released), challenging every system that tries to run it at any high-end settings. Developed by 4A Games and released in March 2010, we use the inbuilt DirectX 11 benchmark to test the hardware.

Metro 2033 - 1680x1050; High Quality; 4xAF

Metro 2033 - 1920x1080; Very High Quality; 4xAA; 16xAF

Conclusions

You cannot really budge any of the boards in their 3D performance. The Gigabyte board technically performs worse than either of the other P67 boards benchmarked, but the differences between them could easily be masked by statistical variance.

System Benchmarks Final Words
Comments Locked

137 Comments

View All Comments

  • James5mith - Friday, January 21, 2011 - link

    One big giant reason to use the Asus board? Intel® 82579 Gigabit Ethernet

    An Intel PHYS on an Intel board means one less PCIe lane taken up by the NIC. Not to mention, it's Intel not Realtek.
  • Mumrik - Friday, January 21, 2011 - link

    ‘if I’d rather take a $150 board rather than a $190 board, why are there $300 boards available?’

    No, the question is why you don't focus more on reviewing the lower end boards. Motherboards have become too expensive, especially when you consider how much is being moved onto the CPU. These were Asus' and Gigabyte's midrange boards. I'd love to hear more about the two below them in the two companies' lineups. Let's hear if there's a reason not to pick the 130-150 options.
  • erple2 - Friday, January 21, 2011 - link

    I think the question is still extremely valid - if the 150 dollar board gives you all of the performance of the 190 dollar boards, where does that leave the 300 dollar boards?

    You also bring up another good question - what can the 150 dollar board buy you that the 100 board doesn't have?

    My assumption is that there are various features that simply don't exist on the sub-100 dollar boards.

    BTW, I'm not sure that motherboards are really all that expensive. At least, not beyond "standard inflation". The same level of features (of the day) cost about the same amount as they do today, I think.
  • 7Enigma - Tuesday, January 25, 2011 - link

    If this is standard inflation we are in for a world of hurt....
  • sweetspot - Friday, January 21, 2011 - link

    Just me but id prefer 70fps in my games if sound quality was excellent vs 75-80 FPS and unusable sound mobo parts. And or have to pay additional for add on pci sound card cash which defeats the savings shown using the asrock 150 mobo yet sounds bad so pay 50-70 more for add on card, vs the 2 190 boards sounds are good, So the value set he describes in this review of the 40 dollar cheaper board is totaly stupid since he failed to show the boards major components correctly ( Yes sound on a mobo is consider a major component piece of the many).

    Sure reader can go elsewhere to get the info but the point of the review sites is to cover basic parts so people dont have to web hop all day for those details.
  • faxon - Friday, January 21, 2011 - link

    I wanna see a review of these vs the P67-GD65 from MSI. its the cheapest 8 SATA port board on the market and other sites have been saying it looks pretty good, wondering what you guys think before i buy it though
  • HauntFox - Friday, January 21, 2011 - link

    I just built a new system with this Asus board, it is quite nice, except I do not like the sata ports that point to the front. I barely have enough room to plug a sata cable into them with my case because the drive cage is in the way.
  • RussianSensation - Friday, January 21, 2011 - link

    Legit Reviews did a comparison, which can be found here: http://www.legitreviews.com/article/1500/1/

    1) Realtek vs. Intel - Besides a 3% lower CPU performance, the throughput is hardly any better wtih Intel. Also, unless you are networking multiple computers, we aren't going to be hitting 900+MB/sec in Internet speed.

    2) 16x/4x vs. 8x/8x in CrossFire - Since P67 chipset runs PCIe 2.0 at full speed unlike P55 chipset, the PCIe 4x slot off the P67 chipset actually has 2x the PCIe bandwidth compared to P55 16x/4x boards. Overall, when testing with HD6950s in CF, the performance difference is almost nonexistent.

    So overall, the stock P8P67 board looks like the one to get for those running single-GPUs.
  • Exodite - Monday, January 24, 2011 - link

    I'd get the ASUS just for the Intel LAN solution TBH.

    I can't say whether it's hard- or software, or a combination of the two, but Realtek ended up as a real step down from the Marvell solution in my previous motherboard and I'd avoid it in the future if I can.

    Most notably I went from a 30-40ms latency in WoW to 100-120ms with the Realtek. This was only recently rectified, well mostly rectified, with a driver update.

    So for me personally i'd definitely be worth it. It's nice to see a review that tests the LAN solutions but frankly just testing throughput and CPU usage is rather disingenuous as latency and jitter probably play a larger role in most network-related usage.
  • fixxxer0 - Saturday, January 22, 2011 - link

    how come there are no tests showing the SATA 6.0 speed comparisons?

Log in

Don't have an account? Sign up now