Power Consumption

We reported drive only power consumption in three scenarios: idle, during sequential writes and during high queue depth 4KB random writes. At idle the V+100 does incredibly well, but under load it is one of the most power hungry SSDs we've tested. As bad as that sounds we're still talking about half of the power usage of a 600GB VelociRaptor, but in a notebook don't expect to save any power under load - only at idle.

A big contributing factor to the high power usage is the controller's aggressive garbage collection. To be fair however, even the SandForce drives require similar power levels if faced with incompressible data.

Idle Power - Idle at Desktop

Load Power - 128KB Sequential Write

Load Power - 4KB Random Write, QD=32

AnandTech Storage Bench Final Words
Comments Locked

96 Comments

View All Comments

  • eckre - Saturday, November 13, 2010 - link

    So this seems like a perfect drive for a RAID because of it's aggressive always on garbage collection would make up for lack of TRIM support. ?

    Am I correct? Thoughts?
  • JohnWPB - Saturday, November 13, 2010 - link

    I have built probably 10 pc's in the last 2 yrs, and wonder if adding a SSD as a boot drive would be worth the effort.

    I see you guys making lots of comments, but as a newbie on SSD's, I would really like to see a thread on how to introduce a SSD to a system that has a bunch of SATA drives.

    Exactly how does one go about installing Windows XP Pro? I imagine that I should disconnect my SATA drives and just hook up the SSD and then do a CD install?

    Can programs like CasperXP ( mirror imaging program ), be used to do a mirror image backup from an SSD to a Sata drive ( C: boot drive SSD to D: mirror drive SATA ).

    My apologies if this was posted in the wrong thread.
  • Out of Box Experience - Saturday, November 20, 2010 - link

    QUOTE:
    Exactly how does one go about installing Windows XP Pro? I imagine that I should disconnect my SATA drives and just hook up the SSD and then do a CD install?
    ---------------------------------------------------------------------------------------------------------

    You are correct as far as I can tell...
    I just spent the past 2 days retesting the copy/paste speed of a Vertex 2 with the alignment tweak recommended by OCZ

    There was no speed benefit resulting from the alignment of the partition as OCZ described

    Copy and paste speed was still a miserable 3.6 megabutes per second

    But just to be on the safe side, I will start using ONLY Intel SSD's with Windows XP

    Anand says Intel controllers are alignment agnostic and should be the best for non-compressible data under XP

    So, untill other SSD manufacturers start making alignment agnostic controllers that are capeable of doing a copy and paste faster than my 5400RPM laptop drive under XP, I think I'll just stick with Intel

    (Better Flash Quality as well)
  • Ezekeel - Saturday, November 13, 2010 - link

    Hi Anand,

    you noted that due to the aggressive garbage-collection this SSD will have a large write-amplification, so the flash will wear-out more quickly. What would happen when using this SSD with an OS that supports TRIM? Will TRIM support the internal GC and lead to a smaller write-amplification and thus a longer lifetime of the SSD?
  • mpx - Sunday, November 14, 2010 - link

    Can you test how VMs behave on SSD? I understand it's partially there in synthetic IOPS and bandwith tests - that show what can you get max. from these drives. But "normal" load from multiple VMs should be different than normal load from a single OS, so drives that do good at normal load in current test migth be not performant under normal load of multiple VMs.

    This test with few VMs makes sense for larger drives (160, 256GB), as there just won't be enough place for multiple OSes on small drives. Also longevity becomes more important when you have few times larger load.
  • tecknurd - Sunday, November 14, 2010 - link

    I use Linux and its TRIM command support is sparse. Finally a drive that does not require the TRIM command. I know it comes at a cost of more wear and tear, but I do not mind because pros out weighs the cons. It will give me no noise from the storage system and it be about 60 times quicker than my hard drive to access files. I do not think $280 for 128 GB is not a bad deal for a SSD that does not require the TRIM command to function great. Though, one thing that comes to mind is does the Kingston SSDNow V+100 come with ECC because all hard drives includes ECC for data integrity.
  • Ezekeel - Sunday, November 14, 2010 - link

    Why sparse? The kernel supports TRIM since 2.6.33 (early 2010).
  • tecknurd - Wednesday, November 17, 2010 - link

    True, but the file system also have problems with SSD. Not all file system in Linux are SSD aware. EXT3 and EXT4 does not have good support to handle SSD.
  • Ezekeel - Friday, November 19, 2010 - link

    Linux filesystems ext3/ext4 are designed for magnetic drives - but that is also true for ntfs and hfs+, so the problems with SSD are not unique to Linux. However, it is true that while at least Windows7 does some automatic optimizations, you have to configure everything manually under Linux.
  • sprockkets - Sunday, November 21, 2010 - link

    All you have to do is format the drive with ext4, add the discard option, and you are set. TRIM is enabled automatically in the background; no need to manually run the command anymore.

    Even with the latest firmwares, this isn't an issue anyway.

Log in

Don't have an account? Sign up now