Dell G2410H Review: A Green 24" LCD
by Brian Klug on May 7, 2010 1:43 AM EST
Black and White Point Uniformity
In addition to the performance a center, we’ve also added 9-point testing for brightness, both white and black. This is done the same way we measure color uniformity, except we only care about measured intensity. We set the monitor through OSD controls as close to 200 nits as possible, and then measured those 9 points.
Brightness - Black Uniformity
We do the same again for the black point, note that the difference in color in the table down below is exaggurated. Differences in luminosity of 0.04 like we see here aren't visible except with extreme scrutiny.
Overall, uniformity here is pretty decent. Our plots exaggerate differences, and in practice the G2410H has excellent black and white uniformity across the entire display at 200 nits, 100 nits, and maximum brightness. We weren’t ever distracted by any brightness bleeding, anywhere on the display.
Facebook
Twitter
RSS
39 Comments
View All Comments
tno - Friday, May 7, 2010 - link
"unless you’re using an HDMI to DVI cable, you should be running the LCD at native resolution."I am currently using two HDMI to DVI cables in my HT set-up. HTPC (DVI) to receiver (HDMI) and receiver (HDMI) to old Sony XBR 1080i (DVI). This is all HDCP comliant so I don't have any issues. Since I'm moving very far away I will be leaving my tried and true Sony and in the interim between moving and getting a NEW TV I picked u a rather cheap OLD TV (Dell W3000). This older model does not have HDMI either so I will still be using an HDMI to DVI cable. Is this a bad thing?
I'm running at 720p out of the PC on this 13//x768 dislay? Will this be a problem? Should I set the PC to the native rez? Thanks for the article BTW. Great job. I have loved my CRTs, (the XBR plus a behemoth 2048x1536 NEC model for my PC) and hung to them more because of the bargains that they were. I gladly traded the exertion required to lift them for the cheap price and better PQ was just bonus. But the prospect of moving them has lessened their appeal so I will be tube free from now on.
tno
quiksilvr - Friday, May 7, 2010 - link
I'll state what I stated before when I commented on the release of the G2410 and heard about these "letdowns".Ahem...
If there are no speakers, WHY DO YOU NEED HDMI? It has HDCP compliant DVI-D. Just spend the whopping $5 and get the DVI-D to HDMI adapter. It's not like this thins is 2560x1400. Its a run of the mill 1080p screen.
aftlizard - Friday, May 7, 2010 - link
Why do I need HDMI if I don't need audio? Because I don't want to spend the extra money if I don't have to. If I have the cable already or want to spend money on the cable I can find hdmi cables cheaper than a converter or even an hdmi-dvi cable.aftlizard - Friday, May 7, 2010 - link
Why do I need HDMI if I don't need audio? Because I don't want to spend the extra money if I don't have to. If I have the cable already or want to spend money on the cable I can find hdmi cables cheaper than a converter or even an hdmi-dvi cable.james.jwb - Friday, May 7, 2010 - link
Next monitor upgrade: 24-inch or larger, IPS or better, 120 Hz performance.When that comes I'll be happy ;)
JarredWalton - Friday, May 7, 2010 - link
I don't know that anyone has done IPS (or PVA/MVA for that matter) at anything above 60Hz. I could be wrong, I freely admit this, but virtually every 120Hz display I've heard about was a TN panel. Blech. When you consider the pixel response times, though, it starts to make a bit of sense. 120Hz should be doable with the 6ms IPS panels, but the 2ms TN panels might switch a bit faster. (Note that in our testing, even the 2ms TN panels still show much 2-3 frames.)Anyway, I'm with you. I'd like 120Hz IPS, with a high resolution 30" panel. LOL. I think I'd need quad-link DVI to do that.
james.jwb - Friday, May 7, 2010 - link
display port should do it?svojoe - Friday, May 7, 2010 - link
for off griders like myself this is sooooo awesome. 13 watts! Holy crap thats such low power consumption I can not feel bad about draining down my batteries!Brian Klug - Saturday, May 8, 2010 - link
Out of curiosity, are you on a PV system or something else? I'm moving into a place that's entirely solar powered with a 1:1 PV offset. I'm glad there's someone out there excited by the prospect of a low-power monitor, I mean, 11 watts still is impressive to me as well. Especially considering the brightness you get for that amount of power.-Brian Klug
Porksmuggler - Saturday, May 8, 2010 - link
Thanks for putting the panel type TN on the first page. $339 for a TN with no HDMI, no thanks. The 1080P isn't puzzling at all, it's all about saving on panel cost. Anyone feel like doing the math on how long you would have to use this "green" LCD to make up for the sticker bloat?