Intel 975XBX
Basic Features


Intel 975XBX
Market Segment High-End/Enthusiast
CPU Interface Socket T (Socket 775)
Chipset Intel 975X + ICH7R
CPU Support Core 2 Duo, Pentium D, Celeron D, Pentium XE, LGA-775 based Pentium 4
Thermal Design 8-phase power
Fan-less (Passive) Cooling
Front Side Bus 1333 / 1067 / 800 / 533 MHz
Host Burn-In Mode 0 - 50% (in 1 percent increments)
Memory Speeds Default, DDR2 333, 400, 533, 667, and 800MHz
PCI Bus Speeds Default, 40.00MHz
PCIe Speeds Default, 101.32, 102.64, 103.96, 105.28, 106.6, 107.92, 109.24MHz
Set Processor Multiplier 6 to 40 (Depends on CPU) in 1X increments
Core Voltage Default, 1.2750V to 1.6000V (in 0.0125V increments)
DRAM Voltage Default, 1.80V, 1.90V, 2.00V, 2.10V, 2.20V
MCH Chipset Voltage Default, 1.525V, 1.600V, 1.650V, 1.725V
FSB Termination Voltage Default, 1.271V, 1.333V, 1.395V
Multi-GPU Option CrossFire (2 X8 PCIe)
Memory Slots Four 240-pin DDR2 DIMM Slots
Dual-Channel Configuration
Unbuffered ECC/non ECC Memory to 8GB Total
Expansion Slots 2 PCIe X16 (operates in 1X16 and 1X8 or 2X8 mode)
1 PCIe X16 (operates in X4 mode)
2 PCI 2.3
Onboard SATA 4 SATA 3Gb/s by ICH7R
Onboard IDE 1 UltraDMA 100/66/33 (2 Drives) by ICH7R
SATA/IDE RAID Intel ICH7R:
(4) x SATA 3Gb/s
RAID 0, RAID 1, RAID 5, RAID 10, and Intel Matrix Storage technology
Silicon Image SiI3114:
(4) x SATA 1.5Gb/s
RAID 0, RAID 1, RAID 0+1 (operates on PCI bus)
Onboard USB 2.0/IEEE-1394 8 USB2.0 ports by ICH7R
2 IEEE 1394a FireWire Ports by TI TSB43AB23
Onboard LAN Intel 82573L PCIe X1 Gb LAN
Onboard Audio Sigmatel STAC9221D, 8-channel capable HD Audio Codec featuring Dolby Master Studio technology
Power Connectors 24-pin ATX
8-pin EATX 12V
4-pin Molex Plug
Back Panel I/O Ports 1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Parallel
1 x Serial
1 x Audio I/O Panel
1 x Optical S/PDIF Out Port
1 x Coaxial S/PDIF Out Port
1 x RJ45
4 x USB
BIOS Revision Intel 6/20/2006

The Intel 975XBX, known by most as the BadAxe, was the first motherboard to officially support Core 2 Duo. AnandTech reviewed the board in January 2006 at Intel D975XBX: Intel brings their BadAxe to Market, but that early board was not really compatible with the just-launched Core 2 Duo processors. For Conroe compatibility the BadAxe must be Revision 0304 or later.

Click to enlarge

Since BadAxe was the only Conroe choice during much of the developmental testing, it quickly gained a list of user modifications that seems almost endless. The 975XBX is an Intel board that is actually capable of being overclocked and that actually has some decent adjustment options in the BIOS. This is not something you expect from Intel boards in the past, but it has definitely been an increasing part of Intel's top-end offerings.

The current BadAxe board has a few improved options in the BIOS, like overclock options to 50% instead of 30%, but it is otherwise still the exact same board AT reviewed this past January. For more information on the board please go to the AnandTech BadAxe review.

Basic Performance

While Intel does provide options that enable overclocking BadAxe, they still have a lot to learn about producing a motherboard for the Enthusiast. If you set a bad overclock on the BadAxe the board will NOT recover gracefully as ASUS, Gigabyte, DFI, and other Enthusiast boards normally manage. If you try to do some serious overclocking on this board you will quickly learn where the clear CMOS jumper is located and how to pop out the battery. In a failed OC on BadAxe, clearing CMOS and removing the battery are the only way to recover and reboot. This makes overclocking with BadAxe a very frustrating experience.

It is perhaps best to view the Intel 975Xbx as an incredibly stable motherboard built to last a very long time, as Intel motherboards normally are. It also allows overclocking, but the Intel BadAxe is not really set up for the kind of overclocking serious overclockers demand. It's is a difficult board to bring back from a failed OC.

Intel motherboards remain the standard against which others are measured in stock performance, and BadAxe is a fast and stable board running Core 2 Duo. It is not, though, a speed demon compared to the ASUS or other solid 975X motherboards as we have sometimes seen from Intel in the past.

Those who could care less about overclocking, or who only want to overclock modestly will likely be very pleased with BadAxe performance. So will overclockers who only want to overclock with multipliers since BadAxe supports the unlocked X6800 processor with multipliers both up and down from the stock 11x.

Overclocking

Intel 975XBX
Overclocking Testbed
Processor: Intel Core 2 Duo E6700
Dual Core, 2.67GHz, 4MB Unified Cache
1066FSB, 10x Multiplier
CPU Voltage: 1.395v (default 1.2V)
Cooling: Tuniq Tower 120 Air Cooling
Power Supply: OCZ GameXstream 700W
Memory: Corsair Twin2X2048-PC2-8500C5 (2x1GB)
(Micron Memory Chips)
Hard Drive Hitachi 250GB 7200RPM SATA2 16MB Cache
Maximum OC:
(Standard Ratio)
325x10
3250MHz (+22%)

Perhaps because overclocking was so difficult compared to other boards in this Buyers Guide we only managed to reach a 22% overclock with the E6700, or 3.25GHz. We reached a similar 21% OC with the 2.93GHz X6800, reaching a stable 3.55GHz.

Others who have modified the BadAxe board, or who have a much greater tolerance to OC pain than we do, have reached much higher overclocks than we reached in our tests. However, two editors, with different boards and processors, reached almost the same results with BadAxe.

If you want to run your 2.93 or E6600 at 4GHz without a huge hassle then choose another motherboard, like the ASUS P5W-DH Deluxe. If you want to run almost forever with no problems then choose BadAxe. You can even take BadAxe to stratospheric overclocks, but that requires hardware modifications.

ASUS P5W-DH Deluxe ASUS P5B Deluxe
Comments Locked

123 Comments

View All Comments

  • mongoosesRawesome - Wednesday, July 19, 2006 - link

    Im curious, can you go into some detail as to how you determine each memory's stable speeds at the various timings you reported?

    Did you test any of the value ram up to 1067 or would they not work at all?
  • shabby - Wednesday, July 19, 2006 - link

    Too bad you guys didnt test the asrock conroexfire, its basically similar to the one you tested now but with a 16x pcie slot and only ddr2 support.
  • Gary Key - Wednesday, July 19, 2006 - link

    quote:

    Too bad you guys didnt test the asrock conroexfire, its basically similar to the one you tested now but with a 16x pcie slot and only ddr2 support.


    We have more boards coming, the flood gates are getting ready to open from the motherboard suppliers over the course of the next four weeks. Although the press embargo release was moved up to last week, the motherboard suppliers were still targeting 7/27 for hardware releases into the market. We will review and post articles on Conroe capable boards as soon as we receive them. We still have some very good AM2 boards to review also. ;-)
  • jones377 - Wednesday, July 19, 2006 - link

    Can you guys run a few benchmarks with DDR1 on this board? It doesn't have to be the full suite, just some to get an idea of DDR1 performance with Conroe. Thanks!
  • Gary Key - Wednesday, July 19, 2006 - link

    quote:

    Can you guys run a few benchmarks with DDR1 on this board? It doesn't have to be the full suite, just some to get an idea of DDR1 performance with Conroe. Thanks!


    We are testing another DDR1 board shortly and will have those results up in the near future. Bios version 1.3 on this board improved DDR1 performance and we are expecting another bios spin shortly.
  • jones377 - Wednesday, July 19, 2006 - link

    quote:

    We are testing another DDR1 board shortly and will have those results up in the near future. Bios version 1.3 on this board improved DDR1 performance and we are expecting another bios spin shortly.

    What board is that? Another ASROCK? They have quite a few Conroe compatible ones based on VIA, ATI and the i865G chipsets.
  • Gary Key - Wednesday, July 19, 2006 - link

    Yes, we will be testing the ASRock 775i65G, there might also be a i865 board coming from PC Chips. We should see some additional value based boards in the near future from other suppliers based on the 946PL and SIS662 chipsets.
  • yacoub - Wednesday, July 19, 2006 - link

    Lists chipset as: Chipset Intel 975X + ICH8R

    I thought it was 965?
  • yacoub - Wednesday, July 19, 2006 - link

    And on the same page:

    "Despite the similarity of the ASUS 975X and 965 top boards, a closer look at options does tell you 965 is targeted a bit lower than 965. "
  • JarredWalton - Wednesday, July 19, 2006 - link

    Fixed - as you can imagine given the length, there will probably be a few more typos than normal. Our heads are all spinning a bit after putting this together. ;)

Log in

Don't have an account? Sign up now