Lian Li PC-V1000

And finally, at the highest price point out of our selection, is the case that comes with our recently reviewed F1B desk. Since we have already reviewed this case in great detail before, we will only be using the case as a base of comparison and highlighting a couple of points regarding its price premium over the other cases in this roundup. The PC-V1000 was available for as little as $180, but typically closer to $200.


Click to enlarge.

Another reason why we'll show a bit of this case again now is because in our first review, we looked at a silver case, and this one is finished in black, which gives it a rather drastically different look.


Click to enlarge.

However, the most important reason why we're looking at this case again is because this time, the case came with even more cooling accessories, which will change the case's abilities to cope with high temperatures.


Click to enlarge.

For a quick recap of what makes this case so unique, a quick glance at this picture does the trick. The PC-V1000 inverts the typical computer, placing the power supply in its own area along with the hard drives, while the motherboard and external drives are all accessed via the other side of the case.

We noted before how the power supply compartment has issues with large power supplies, but after a careful inspection of this black model, we found a way to compensate for the problem.


Click to enlarge.

The problem is that there is a dividing plate separating the PSU from the second set of hard drives, and it is this plate that prevents longer supplies from fitting properly.

With this black model, this plate is removable, allowing the supply to slide all the way, but at the cost of making some of the hard drive bays difficult to impossible to use.

With even two of the bays hard to reach now, there are still four usable bays, which will be more than enough for most users.


Click to enlarge.


Antec P-180 (cont’d) Lian Li PC-V1000 (cont’d)
Comments Locked

48 Comments

View All Comments

  • RupertS - Thursday, September 8, 2005 - link

    The power supply is a good part of the total value of the case. Also, some of the cases may work better (cooling, sound) with the power supply they come with.

    Hard to compare prices like this.
  • johnsonx - Thursday, September 8, 2005 - link

    Ditto that... this complaint has been leveled before of course:

    Anandtech should at least mention what power supply is (or can be) included with the case, and give some sort of subjective rating of same. For example, the Aspire case is most often available with a 420W power supply (usually a mere $15 or so more than the PS-less version), but I've heard it's crap... but maybe it isn't; I'd like Anandtech to tell me.

    Likewise, the Sonata II ALWAYS (AFAIK) includes a SmartPower 2.0 450... doesn't that add significantly to the value equation? (granted, it'd be better if it were a TruePower 380 like the old Sonata, but a SmartPower 2.0 is nothing to scorn)

  • ElFenix - Thursday, September 8, 2005 - link

    everyone should read the reviews on SPCR before setting up a system on this case. the reviews are very thorough and tests it in multiple configurations, and it turns out there are things you can do to improve its thermal performance by quite a bit (such as duct taping over the holes next to the power supply)
  • flatblastard - Thursday, September 8, 2005 - link

    Duct tape on a brand new case? I don't think so..... Well, I personally wouldn't do it, but for modders/OCers I guess it might make sense.
  • fass mut - Thursday, September 8, 2005 - link

    what's the link to the article?
  • ElFenix - Thursday, September 8, 2005 - link

    all three articles, the first is over main features, the second is an absolutely silent computer, and the third is more mainstream rigs

    http://www.silentpcreview.com/article249-page1.htm...">http://www.silentpcreview.com/article249-page1.htm...
    http://www.silentpcreview.com/article254-page1.htm...">http://www.silentpcreview.com/article254-page1.htm...
    http://www.silentpcreview.com/article255-page1.htm...">http://www.silentpcreview.com/article255-page1.htm...
  • jonp - Thursday, September 8, 2005 - link

    Doesn't an ATX extension cable for $4 cover the power supply to motherboard distance concern? Granted, Antec could have included it with the case; but it's NO big deal to resolve. Shouldn't be an issued when deciding.
  • mjz - Thursday, September 8, 2005 - link

    i hate lian li cases. I spent probably 200 dollars on their case (2 years ago) and it vibrates too much, the sound is pissing me off. I guess it can't handle my raptor or something.
  • Tamale - Thursday, September 8, 2005 - link

    I too agree that way too many of these cases are kinda ridiculous looking, but someone said it best when they said "the Eclipse must look better in person"... it really does. I liken it to those fancy cd players from places like brookstone and the sharper image..

    It's flashy, sure, but at least it's kinda 'classy flashy', if you know what I mean. If that kinda look still doesn't please you at all, there's always cases like the P-180 ;)
  • mkruer - Thursday, September 8, 2005 - link

    Considering that I have a PC-V2000 Plus. I am in a unique position to voice my opinion for everyone reading this thread. I will say that yes the cases Lian Li cases are overly expensive, but considering that they are the only “all aluminum” case manufacture, and they have arguably the best design, they can get away with it. The main issues with an “all aluminum” case is that because aluminum is light then steal and yet does not have the absorbing capacity of plastic, aluminum as rule of thumb tends to be louder. However there are three things you can do o improve the noise ratio of the system. First is to install sound absorbing foam in the case. This will cut down on high pitched noise. Next is to install quieter fans. The Lian Li fans are good, but they are only about average in the noise to air ratio. Finally and this is the biggest thing. In order to cut down on the “wan wan” resonance sound coming form the case you need to suspend the drive is a sling and not it the mounting bays. This by far reduces the most noise.

Log in

Don't have an account? Sign up now