Lian Li PC-V1000 (cont'd)

The first of the two extra cooling accessories is a large blower fan designed to help draw the rising hot air out of the inverted case.

This piece simply mounts with included screws directly to the perforations in the back of the case, which allows for the fan to be moved to many slightly different positions.

The second addition is simply an attachment for the included rear 120mm fan.

Normally, the fan just pulls air in the surrounding area equally, but after attaching a special piece, a shroud can be added as well.

With the shroud attached, the fan should only pull air directly around the CPU area.

If one wants, the shroud could be locked in a position that keeps it at a good distance from the CPU cooling hardware, allowing for more air from the rest of the case to be pulled out here as well.

However, the shroud can also be lowered very close so that the CPU is pretty much the only hardware benefiting from the additional cooling. We will test the PC-V1000 in this configuration to see how well this approach works.

Overall, the PC-V1000 is a joy to work in - the side panels are second to none, the side-mounting hard drive system works flawlessly, and the inverted design actually makes the case quite easy to work in, as opposed to the P-180's "half inversion", which can be very limited by the length of the power supply leads.

However, cases like the P-180 and Eclipse implement many more sound dampening features, and we'll notice that when we get to the sound benchmarks. In the end, we think the price-premium for a case like the PC-V1000 is a tough sell, considering how much you can get for your money from other manufacturers.

Lian Li PC-V1000 Benchmark Comparisons
Comments Locked

48 Comments

View All Comments

  • Abecedaria - Sunday, September 11, 2005 - link

    What was the criteria for choosing these cases? Most of them look nasty-plasticy and even the Antec P-180, although it looks good, has a veery plasticy feel.

    Where was Silverstone in your review? They have some of the best cases available:
    http://www.silverstonetek.com/product-case.htm">http://www.silverstonetek.com/product-case.htm
    and from their new subsidiary:
    http://www.tuniq.com.tw/Chassis/chassis.htm">http://www.tuniq.com.tw/Chassis/chassis.htm

    These things rock.

    abc
  • unclebud - Monday, September 12, 2005 - link

    please consider reviewing the performance 640 next time?
    it currently includes a smartpower v2 400w, for $129
    thanks in advance
  • Rudee - Saturday, September 10, 2005 - link

    There is an error in the article. The Sonata II does indeed have a removable air filter in the front of the case, thus should not be given a score of "0" for this catagory.
  • Tamale - Saturday, September 10, 2005 - link

    The filter is removable from the bottom of the case only.. while this certainly is 'removable', it is nowhere near as accessible as the other cases which I gave this point to. I struggled with the idea of giving the case .5 for this category, but it wouldn't have made a difference in the end, and I really don't feel that most users would go through the trouble of tipping the case over just to clean the filter, so no points were awarded.

    Thanks for pointing out the detail though.
  • Rudee - Saturday, September 10, 2005 - link

    The Sonata II case is great. I was able to overclock a AMD 64 3700 to 2700mhz using the stock AMD heatsink and fan with one Panaflo 92mm fan in the duct over the CPU. Temps are great and I ended up returning my Zalman 7700 as I didn't need it.
  • dgkulzer - Friday, September 9, 2005 - link

    After 1 month of use I am very happy with my P180. Assembly does take a bit longer than a standard case if you are trying to hide your cables but that isnt much of an issue to me. I put a Phantom 500 PSU in it and because its longer than most other PSU's I had to replace the lower fan with a thinner model (Nexus 120). I have 4 hard drives in the lower chamber and the Nexus at 5 volts keeps them very cool - I havent had the Phantom fan kick on yet either.

    This is one case that looks better in person than it does in pictures, the pictures make it look like a little fridge or something but it looks pretty sweet on your desk :)
  • mschira - Friday, September 9, 2005 - link

    I guess the two compartment design is great for watercooling. You could put the pump reservoir etc in the lower compartment. If something leaks, the electronic is save.
    I think that's great thing...
    M.
    P.S. onla trouble is where to put the power suply...
  • Griswold - Friday, September 9, 2005 - link

    Kids, having a flashy computer under your desk doesnt make the chicks like you more. Say no to stupid side windows!
  • Tamale - Friday, September 9, 2005 - link

    you seem to forget that most kids who think it would look cool to have the window in the first place probably don't care about girls anyway ;)

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool
  • Griswold - Sunday, September 11, 2005 - link

    quote:

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool


    Besides the total lack of EM shielding (which is enough reason to not do what you did, not only because it's not allowed in many countries (I know, I know, US is different, there, the cops wont stop you if your car has only 3 wheels..)), a full acrylic case is a nice show thingie. I just find side windows embarrassing, especially when the rest of the case looks like Optimus Prime's chest armor.

Log in

Don't have an account? Sign up now