The Intel B560 Motherboard Overview: 30+ Budget Models Starting from $75
by Gavin Bonshor on March 29, 2021 7:00 AM ESTASRock B560M Pro4/ac & B560M Pro4
Up next in our overview is a pair of modest micro-ATX models from ASRock, the B560M Pro4/ac, and the B560M Pro4. The only difference between the two models is the ac variant includes an 802.11ac Wi-Fi 5 CNVi. Everything else is built to the same specification and design, including a black and grey patterned PCB, silver heatsinks, as well as an advertised 8-phase power delivery with 50 A power chokes. ASRock does include a small section of RGB LEDs in the bottom-right hand corner of the board.
The ASRock B560M Pro4/ac pictured above
Both the ASRock B560M Pro4/ac and B560M Pro4 include a smaller micro-ATX sized PCB, with two full-length PCIe slots with the top slot operating at PCIe 4.0 x16, and the second slot locked down to PCIe 3.0 x4. ASRock also includes one PCIe 3.0 x1 slot, with the B560M Pro4/ac using an Intel-based Wi-Fi 5 CNVi. In regards to memory support, there are four slots with supported speeds of up to DDR4-4800 and a maximum capacity of up to 128 GB. Storage options consist of dual PCIe M.2 slots with one operating at PCIe 4.0 x4, and the other including support for both PCIe 3.0 x4 and SATA drives. ASRock also includes six SATA ports with two of these featuring straight-angled connectors and four with right-angled connectors, with RAID 0, 1, 5, and 10 arrays supported.
The ASRock B560M Pro4/ac rear panel
On the rear panel, both models include four USB 3.2 G1 Type-A and two USB 2.0 ports, with a single HDMI video output and three 3.5 mm audio jacks controlled by a Realtek ALC897 HD audio codec. The B560M Pro4/ac includes a pair of antenna connectors for an unspecified Intel 802.11ac Wi-Fi 5 CNVi, with both models including a single Intel I219-V Gigabit Ethernet controller and a PS/2 combo port.
ASRock has set an MSRP of $105for the ASRock B560M Pro4/ac, although the ASRock B560M Pro4 (without Wi-Fi) is slightly cheaper with an MSRP of $100.
Facebook
Twitter
RSS
59 Comments
View All Comments
FriendlySeaCow - Monday, March 29, 2021 - link
The MSI MPG B560I Gaming Edge Wi-Fi has been announced and its features fully released, so you can update that page. Incidentally, there's also a typo in the MSI table, where you have "ATX" instead of "ITX" under the Size Column for the B560I.Looks like a really nice board: https://www.msi.com/Motherboard/MPG-B560I-GAMING-E...
Jorgp2 - Monday, March 29, 2021 - link
Why didn't they enable the full 8 sata ports for this chipset, X299 is dead anyway.Linustechtips12#6900xt - Thursday, April 8, 2021 - link
because who uses 8 freaking sata ports at a time, i think the MAX I've ever used is 4Mr Perfect - Monday, March 29, 2021 - link
Nice round up. Any chance you'll do something similar for H570? They don't seem to cost much more, but have some additional chipset features.Scour - Monday, March 29, 2021 - link
B560 also with 6x SATA, PCIe 4.0 and also on ATX-boards, sound good for me.sheltem - Monday, March 29, 2021 - link
According to this Reddit post, the Asrock B560 ITX has pretty good VRM's:https://www.reddit.com/r/intel/comments/lao3ym/z59...
BrokenCrayons - Monday, March 29, 2021 - link
Finally some decently priced motherboards are getting attention they deserve! I'm really happy to see and read about hardware in a price segment I would actually buy and use.evilpaul666 - Monday, March 29, 2021 - link
The 10/11 series would be so much more interesting if it had ECC support.jrbales@outlook.com - Monday, March 29, 2021 - link
I'm in the process of building a new system for my sister. Bought the ASUS Prime B560M-A at a price competitive with the B460 boards. A very nice mATX board that was nice to work with. One observation and one question. I bought the optional Intel WIFI card & antenna kit to use with the WIFI bracket. On the plus side, it works great and I didn't have to run ethernet cable across the room I was building it in. The negative is that the WIFI bracket has to be attached to the motherboard, using really tiny screws from the rear of the board. That probably took the longest thing in the build as I'd have to try to balance the MB, keep the bracket in place over the holes and the card inserted in the slot, while keeping the tiny screws on the screwdriver long enough to screw in. Now for the question. It involves the first M.2 slot, above the GPU. It's PCIE 4.0. According to everything printed by ASUS, if you use a 10th generation CPU, the slot is disabled, leaving only the second M.2 beneath the GPU. I understand the part about needing an 11th gen CPU to get PCIE 4, but shouldn't the first slot support a PCIE 3.0 M.2 SSD? I'm used to these slots being backward compatible and on my AMD X570 board, you can use either PCIE 3 or 4 SSDs in both slots. Does anyone knows if the B56s0 slot 1 is backward compatible?mobilefrenzy - Tuesday, March 30, 2021 - link
M.2 Slot 1 on B560 and Z590 mobos don't work with 10th gen CPUs, as they don't have the additional PCIe lanes to enable them.