The Intel B560 Motherboard Overview: 30+ Budget Models Starting from $75
by Gavin Bonshor on March 29, 2021 7:00 AM ESTASUS Prime B560-Plus
The ASUS Prime series focuses on the more basic elements, with strong features, but with a more subtle and simple aesthetic. Primarily designed as its core series, the ASUS Prime B560-Plus is using a black and silver patterned printed PCB, with silver heatsinks and is advertised as having an 8-phase power delivery. It is also using a single 8-pin 12 V ATX CPU power input. The Prime B560-Plus is also the only ATX sized model in the Prime series, with more PCIe support than its micro-ATX sized Prime branded options.
In terms of PCIe support, the Prime B560-Plus includes one full-length PCIe 4.0 x16 slot, one full-length PCIe 3.0 x4 slot, and two PCIe 3.0 x1 slots. In the top right-hand corner, ASUS includes four memory slots with support for up to DDR4-5000, with a maximum capacity of up to 128 GB. On the storage front, there's a pair of M.2 slots including one with PCIe 4.0 x4 and one with PCIe 3.0 x4/SATA support. In the bottom right-hand corner, there are six SATA ports including four with straight angled and two with right-angled connectors. All six SATA ports support RAID 0, 1, 5, and 10 arrays.
On the rear panel are two USB 3.2 G2 Type-A, one USB 3.2 G1 Type-C, and two USB 2.0 ports. Powering three3.5 mm audio jacks is a Realtek ALC897 HD audio codec, while a single Intel I219-V Gigabit Ethernet controller takes care of networking. There's a trio of video outputs which consist of a DisplayPort, HDMI, and D-sub, while a PS/2 combo port provides support for legacy peripherals.
Facebook
Twitter
RSS
59 Comments
View All Comments
FriendlySeaCow - Monday, March 29, 2021 - link
The MSI MPG B560I Gaming Edge Wi-Fi has been announced and its features fully released, so you can update that page. Incidentally, there's also a typo in the MSI table, where you have "ATX" instead of "ITX" under the Size Column for the B560I.Looks like a really nice board: https://www.msi.com/Motherboard/MPG-B560I-GAMING-E...
Jorgp2 - Monday, March 29, 2021 - link
Why didn't they enable the full 8 sata ports for this chipset, X299 is dead anyway.Linustechtips12#6900xt - Thursday, April 8, 2021 - link
because who uses 8 freaking sata ports at a time, i think the MAX I've ever used is 4Mr Perfect - Monday, March 29, 2021 - link
Nice round up. Any chance you'll do something similar for H570? They don't seem to cost much more, but have some additional chipset features.Scour - Monday, March 29, 2021 - link
B560 also with 6x SATA, PCIe 4.0 and also on ATX-boards, sound good for me.sheltem - Monday, March 29, 2021 - link
According to this Reddit post, the Asrock B560 ITX has pretty good VRM's:https://www.reddit.com/r/intel/comments/lao3ym/z59...
BrokenCrayons - Monday, March 29, 2021 - link
Finally some decently priced motherboards are getting attention they deserve! I'm really happy to see and read about hardware in a price segment I would actually buy and use.evilpaul666 - Monday, March 29, 2021 - link
The 10/11 series would be so much more interesting if it had ECC support.jrbales@outlook.com - Monday, March 29, 2021 - link
I'm in the process of building a new system for my sister. Bought the ASUS Prime B560M-A at a price competitive with the B460 boards. A very nice mATX board that was nice to work with. One observation and one question. I bought the optional Intel WIFI card & antenna kit to use with the WIFI bracket. On the plus side, it works great and I didn't have to run ethernet cable across the room I was building it in. The negative is that the WIFI bracket has to be attached to the motherboard, using really tiny screws from the rear of the board. That probably took the longest thing in the build as I'd have to try to balance the MB, keep the bracket in place over the holes and the card inserted in the slot, while keeping the tiny screws on the screwdriver long enough to screw in. Now for the question. It involves the first M.2 slot, above the GPU. It's PCIE 4.0. According to everything printed by ASUS, if you use a 10th generation CPU, the slot is disabled, leaving only the second M.2 beneath the GPU. I understand the part about needing an 11th gen CPU to get PCIE 4, but shouldn't the first slot support a PCIE 3.0 M.2 SSD? I'm used to these slots being backward compatible and on my AMD X570 board, you can use either PCIE 3 or 4 SSDs in both slots. Does anyone knows if the B56s0 slot 1 is backward compatible?mobilefrenzy - Tuesday, March 30, 2021 - link
M.2 Slot 1 on B560 and Z590 mobos don't work with 10th gen CPUs, as they don't have the additional PCIe lanes to enable them.