Case and Power Supply


Computer Case

Recommendation: Coolermaster CM Stacker (STC-T01)
Price: $175 shipped

Overclockers tend to swap components at a dizzying rate, always looking for something that will run just a little faster or perform a little higher on a competitive benchmark. Since components are likely to be swapped a lot, a case should be as flexible as possible, providing for future components as well as those you might use today. Cooling is also a huge concern for overclockers, so a case that provides exceptional cooling is also a plus.



The 1.0 mm Steel Plate and Aluminum alloy Coolermaster CM Stacker is a case that fits the bill for the overclocker. Not only does it support 11 5-1/4" devices, it also supports both standard ATX and coming BTX designs. The case comes with conversion instructions for mounting a BTX motherboard. You also get support for either one or two standard ATX power supplies, and up to 8 internal fans, in addition to a unique optional crossflow fan.



Coolermaster cases are still some of the best for build-quality that you will find anywhere, and the CM Stacker is the most flexible case design that we have even seen. Whatever your particular desires in overclocking your system, you are likely to find a way to do what you need to to do with the CM Stacker.



You have to see the flexibility of the CM Stacker to believe it.

Power Supply

Recommendation: OCZ Power Stream 520W
Price: $150 shipped

The first thing that most overclockers learn is that the power supply does matter, because the first wall most overclockers run into is the inadequate power supply that came with their white-box computer. Overclocking demands much more of a computer system than running the system at stock speeds. If you think a Prescott at 3.4Ghz demands wattage, then you quickly realize a Prescott at 4.0Ghz demands even more power. The same is true of video cards. If a 6800 Ultra Extreme demands a decent 470W power supply, then you will need even more power when you overclock that 6800 Ultra to higher GPU and memory speeds.

You also quickly learn that all power supplies are not created equal. Most power supply ratings are combined ratings, as regular readers have learned in Power Supply reviews at AnandTech. This means that as some of the power supply rails are driven, other rails drop in power, and may end up supplying less than ideal power under stress. The very best power supplies individually control the power rails. They, therefore, usually handle the stress of overclocking much better than a PS with a combined rating. These are the power supplies that are most coveted by overclockers.



A superb example of a power supply geared to overclockers is the new OCZ Power Stream 520. It was designed from the ground up for overclockers, and features individual rails that are even tweakable for higher output or exact values. There are even LEDs on the rear of the black chrome case that tell you if the PS is operating in spec, under spec, or over spec. These same LEDs can even be used to tweak individual rails for optimum power.

520W sounds like a lot of power and it is, but truthfully, this power supply would probably be rated at 700 watts by a manufacturer who was trying to impress with specs. The 520W rating is conservative and this PS can easily handle almost anything an overclocker wants to throw at it. While the OCZ Power Stream are new to the market, they have quickly become favorites of the extreme overclocking community.

You will also find a stock 24-pin ATX power connector that will work with the new Socket 775 motherboards and servers, as well as a 24-pin to 20-pin adapter to use with motherboards requiring a standard 20-pin connector. There are also extra long SATA and 4-pin Molex connectors to power anything you might put in a full tower case or the CM stacker, as well as special heavy duty cables for the demands of hard drives and the latest high-end video cards. You can find out more about the Power Stream power supplies at the Power Stream product page.

Alternative: Antec True Power 480W
Price: $87 shipped

If $150 for a top power supply seems a bit rich for your budget, there is a very good alternative with the Antec True Power 480. The True Power series features individually powered rails, unlike the lesser Antec power supplies, which brings excellent stability to power-hungry overclocking.



The True Power series, in particular, is one of the most trusted power supplies among enthusiasts, and it will provide your overclocked system with stable power and some reserve for overclocking. While a good quality 350W or 400W power supply might do the job for processors and video cards at stock speeds, you will definitely need a high-quality power supply like the True Power 480 if you plan to overclock.

If you cannot find the lowest prices on the products that we've recommended on this page, it's because we don't list some of them in our RealTime pricing engine. Until we do, we suggest that you do an independent search online at the various vendors' web sites. Just pick and choose where you want to buy your products by looking for a vendor located under the "Vendor" heading.

IDE Hard Drive Overclocking System Summaries
Comments Locked

40 Comments

View All Comments

  • bluedart - Tuesday, July 27, 2004 - link

    It does say the price. Read from the top of the page:

    AGP Overclocking Recommendation: eVGA 256MB GeForce 6800 GT
    Price: $389 shipped

    BTW FX53 is a good choice at overclocking. Keep in mind this is with air. But if you utilize other forms of cooling the FX will go even higher, approaching 3GHz with proper cooling (see THG's review). This makes it one FX58. That is absolutely a grand overclock, seeing that FX58 speeds will not be here for another year or so.
  • danidentity - Tuesday, July 27, 2004 - link

    #4: Did you read Anandtech's article on breaking the overclocking lock? Almost all companies have broken it. It is very possible to reach those speeds with the stock HSF.

    http://www.anandtech.com/cpuchipsets/showdoc.aspx?...
  • devonz - Tuesday, July 27, 2004 - link

    Why isn't the 6800 GT card in the price list on that page? Or am I missing it somehow?
  • T8000 - Tuesday, July 27, 2004 - link

    I think recommending an Athlon FX for overclocking is a joke. Those things do not even manage a 5% overclock, and their real world performance is only close to a P4 at 3.4 GHZ, as gaming at 640x480 is not very common among people spending this kind of money. And at a realistic setting of 1600x1200 and 4xFSAA, the CPU is not really the bottleneck in todays games. When you do encoding, where CPU speed does matter in the real world, the P4 is head and shoulders above Athlon FX.
  • yzkbug - Tuesday, July 27, 2004 - link

    How about a VALUE OC DDR section? Paying $300+ for 5-10% performance increase over ~$150 regular DDR is a waste, imho.
  • Zebo - Tuesday, July 27, 2004 - link

    Peferformance
    ------------
    1. 2.8 P4C to 3.6 $180
    2. A64 3200 to 2.5 $223

    Value
    --------
    1. Duron 1.8 to 2.4 $44
    2. Mobile XP to 2.6 $89

    :)
  • Zebo - Tuesday, July 27, 2004 - link

    Wow recommending a P4C over a moblie barton in the value section.Twice the price for roughly the same OC performance I don't get it. It's the inverse of price to performance. must be an error is all I can imagine.

    Then recommending a Socket 775 presshot. Lets see this 3.8- 4GHZ OC with stock HSF. I don't think so. Then the overclock lock issues which hav'nt been settled, have they? My understanding is 10% over stock FSB, yeilding about 3.4 Ghz far from 4ghz, the system crashes!! What kind of overclockers choice is that?

  • chuwawa - Tuesday, July 27, 2004 - link

    Perhaps it's time to start recommending the Athlon64 3000+ for the value OC alternative.
  • bluedart - Tuesday, July 27, 2004 - link

    This is a great guide for overclocking, although I believe that there needs to be some more acutal testing with the 755 and 939 sockets to give us a better picture of how they perform. It is especially difficult when PCIxpress and ddr2 aren't widely available yet.

    If anyone else has some REAL data on overclocking these new platforms, I would like to see those posts.

    Currently I am making a heat sink out of synthetic Diamond (better heat transfer than copper and silver by 2x) and will be testing it on the FX system. If there are any other reccommendations I would be more than happy to hear them.
  • expletive - Tuesday, July 27, 2004 - link

    I would cast a vote for the A64 3500+. If it can reach 2.6 like an FX53 at half the price that's tough to beat.

    The 3500+ is currently retailing for $390 shipped online. I know thats not quite a 'value' but to get FX53 gaming performance for half the price, that can't be denied....

Log in

Don't have an account? Sign up now