Construction (continued)


 Dell 2001FP
LCD 20.1" UXGA LCD (Active Matrix)
pixel pitch: 0.255mm
Anti-glare coating
Super IPS Mode
Scanning Frequency Horizontal: 31-80kHz (analog)
Vertical: 56-76Hz
Response Time 16ms (Typical)
Contrast Ratio 400:1 (Typical)
Compatibility 1600 x 1200 (Native)
Brightness 250 cd/m2
Dimensions (WxHxD) 16.4"x 17.7" x 8.2"
Power Working: 90W Max
Standby/Off: 5W
Weight 15.4lbs
Warranty 3 years parts and labor

Notice a few quick things from these specifications. First of all, the contrast ratio of 400:1 is quite modest in comparison to other LCDs on the market. As we will find out later on in the benchmarking of this monitor, it is perhaps the most honest too. The 16ms response time and Super IPS display modes are dead giveaways that this is an LG.Philips LCD panel.



Ventilation is provided by about 20 1/8" holes under the inputs on the screen, as well as small slits all around the backside of the panel. We have been hesitant to commend screens that have excessive ventilation because it poses concern for dust buildup inside the unit. The Samsung 192T did an excellent job of dissipating heat without any ventilation holes.


Click to enlarge.


Our monitor came with 5 dead subpixels. Two blue, two greens and a red/green pair were stuck off. The greens were all within a 2" diameter of each other, and the blues were near the center of the screen, which is a noticeable shame. All of the broken pixels were in the lower left quadrant of the screen. However, considering the density and volume of pixels (1600x1200), we expected a higher pixel failure rate. Dell has informed us that had this been an actual production unit, and not a pre-production sample, the defect rate would have been much lower.
Construction Wallmount, Swivel, Pivot & Cable Management
Comments Locked

53 Comments

View All Comments

  • airjrdn - Friday, April 9, 2004 - link

    I'm getting conflicting feelings about this monitor as well. I guess I'm summing it up to some people being pickier than others.

    Is there ANY ghosting at all in UT2K3/4?
  • labelreader - Saturday, April 3, 2004 - link

    Yep. I have one of these monitors at work and that's exactly what I did; the "insulator" actually helps with the movement problems when it's on top of the cable hook because it gives you some slack in the cable between the hook and the display. By the way, there are no flaws on mine or my coworkers' displays...I want one for home!
  • HermosaBeach - Saturday, February 7, 2004 - link

    Hi, I own an ATI 9800 Pro and a Samsung 210T (Digital 1600x1200 via DVI).

    The ATI 9800 Pro defintely supports 1600x1200 via DVI (digital). Not only does it support it, but I only play games at 1600x1200, I never reduce the resolution, unless the game does not allow this resolution. Furthermore, it most games, I turn 6xAA and 16xAF on as well. The odd game is too slow (frames per second are too slow) and I reduce the AA and AF, but I never reduce the resolution.

    You want to use the LCD in its native resolution when-ever possible.

    Dave
  • StripPokeHer - Saturday, December 27, 2003 - link

    Owners of 2001FP:

    Do any of you guys have the same problem with the "grainyness" of this screen.

    Here are different posts from others that I have found:

    http://forums.us.dell.com/supportforums/board/mess...

    http://forums.us.dell.com/supportforums/board/mess...

    http://forums.us.dell.com/supportforums/board/mess...

    I have the same problem. My eyes are used to LCD screens because I use my laptop for half of the day at least (1400x1040 14") I have also used both the 1800FP and 1900FP without issue. But this thing is bugging the sh*t out of me, and i will probably send it back. Waited a long time to get this (primarily based on this review), and the quality of this monitor turns out to be like crap.

    Anyone seen/know what the cause of this is? FYI: I'm running a 9800XT 256MB on DVI @ 1600x1200. Running latest cats + the monitor driver provided by dell. I had the same problem on both DVI and Analog, but truth be told, they were both ATI controllers (9800XT & a Radeon 9000)

    Any input to those who are owners are appreciated! :) TIA
  • MorbentFell - Wednesday, December 24, 2003 - link

    Hmm... will check that out. Thnx for the reply.
  • Singletary - Tuesday, December 23, 2003 - link

    Folks on the Dell Community forum are saying that the screen is LG Phillips, but the monitor is assembled/manufactured by BenQ.
  • MorbentFell - Saturday, December 20, 2003 - link

    I just received this monitor a couple days ago. I've been having some strange problems with green & red horizontal diagnol pixel lines that resolve when I turn the power off and on again. As I was looking on the back, one thing I noticed is that it says 'BenQ Corporation'. I may be showing my ignorance here, but I was under the impression these are LG Phillips screens. Are they the same thing? If not, are the specs/quality equivalent? Any input would be appreciated.
  • Singletary - Thursday, December 18, 2003 - link

    I like the monitor very much, but don't think I have it adjusted correctly. I know room lighting is different, but where are you folks setting the contrast and brightness? Anyone found a profile to ensure color correctness? Please share Kristopher!
  • Spirex - Wednesday, December 17, 2003 - link

    FYI...go to Dell Business to order, they are currently selling it for $749.00 plus tax. Mine came out to a total of $794.00 to ship to NJ. I am not sure how long this promotion will last.
  • Spirex - Wednesday, December 17, 2003 - link

    I just got mine yesterday. Hooked it up via the DVI port to my ATI 9700 pro AIW. This thing is kicks my previous monitor to the curb(Viewsonic p813 21"). At first, I was having difficulty reading text because I wasn't used to the sharpness @ 1600x1200. I had also played in a UT2k3 ladder match that night. To sum it up....AMAZING. No ghosting at 1024x768-60hz full screen. The image quality was as good or better than my CRT. I didn't lose any skill points with this monitor. Maybe I try some real work on it today.

Log in

Don't have an account? Sign up now