F1 2013

First up is F1 2013 by Codemasters. I am a big Formula 1 fan in my spare time, and nothing makes me happier than carving up the field in a Caterham, waving to the Red Bulls as I drive by (because I play on easy and take shortcuts). F1 2013 uses the EGO Engine, and like other Codemasters games ends up being very playable on old hardware quite easily. In order to beef up the benchmark a bit, we devised the following scenario for the benchmark mode: one lap of Spa-Francorchamps in the heavy wet, the benchmark follows Jenson Button in the McLaren who starts on the grid in 22nd place, with the field made up of 11 Williams cars, 5 Marussia and 5 Caterham in that order. This puts emphasis on the CPU to handle the AI in the wet, and allows for a good amount of overtaking during the automated benchmark. We test at 1920x1080 on Ultra graphical settings for a single GPU, as using multiple GPUs seems to have no scaling effect.

F1 2013: 1080p Max, 1x GTX 770

F1 2013, 1080p Max
  NVIDIA AMD
Average Frame Rates



Minimum Frame Rates



Bioshock Infinite

Bioshock Infinite was Zero Punctuation’s Game of the Year for 2013, uses the Unreal Engine 3, and is designed to scale with both cores and graphical prowess. We test the benchmark using the Adrenaline benchmark tool and the Xtreme (1920x1080, Maximum) performance setting, noting down the average frame rates and the minimum frame rates.

Bioshock Infinite: 1080p Max, 1x GTX 770

Bioshock Infinite, 1080p Max
  NVIDIA AMD
Average Frame Rates



Minimum Frame Rates



Tomb Raider

The next benchmark in our test is Tomb Raider. Tomb Raider is an AMD optimized game, lauded for its use of TressFX creating dynamic hair to increase the immersion in game. Tomb Raider uses a modified version of the Crystal Engine, and enjoys raw horsepower. We test the benchmark using the Adrenaline benchmark tool and the Xtreme (1920x1080, Maximum) performance setting, noting down the average frame rates and the minimum frame rates.

Tomb Raider: 1080p Max, 1x GTX 770

Tomb Raider, 1080p Max
  NVIDIA AMD
Average Frame Rates



Minimum Frame Rates



Scientific and Synthetic Benchmarks: 2D to 3D, Emulation, Encryption Gaming Benchmarks: Sleeping Dogs, Company of Heroes 2
Comments Locked

36 Comments

View All Comments

  • darthscsi - Monday, February 24, 2014 - link

    I continue to wish MBs would put a pair of RCA ports for the front speakers rather than mess of 3.5mm connectors for 7.1. Optimize for the common (and most important) case.
  • Flunk - Monday, February 24, 2014 - link

    I don't think RCA are common at all.
  • WithoutWeakness - Monday, February 24, 2014 - link

    RCA isn't nearly as common as 3.5mm in a desktop environment and if someone is planning on running out to a receiver they should probably be using the optical or digital output anyway. Adding RCA outputs on top of those 2 options is unnecessary.
  • Samus - Monday, February 24, 2014 - link

    I actually agree with darthscsi. The market for this board is obvious, and with the attention given to audio performance, RCA would make a lot more sense than 7.1 3.5mm analog connections, especially when taking into account the swap-able OP-AMP is only for 2 channel stereo.

    Many T-AMP's from M-AUDIO, Dayton, Tripath, and so on, have RCA inputs that you annoyingly need to use a 3.5mm to RCA cable to connect. At a low level, 3.5mm is inferior to RCA at noise suppression while supporting shorter distance runs and less durability.

    http://www.amazon.com/Dayton-Audio-DTA-100a-Class-...
  • MadMan007 - Monday, February 24, 2014 - link

    If you really care about audio you'll only use the onboard audio as a digital transport with an external DAC.
  • Sancus - Monday, February 24, 2014 - link

    What would you use RCA for? If you have a serious audio setup, you'll have a separate receiver/amplifier and you definitely don't want to be using the DAC in the motherboard in that case, you'll either want digital out to the receiver directly, or digital out a separate, high-end DAC.

    If you have a standard self-amplified desktop speaker setup, you'll have 3.5mm inputs, not RCA.
  • Samus - Monday, February 24, 2014 - link

    The whole point of this motherboards fancy Creative chip is that it has a superior DAC to most sub-$500 receivers. If you have a $3500 Denon, that's a different story...
  • Frolictoo - Sunday, March 2, 2014 - link

    Consider trying out the MAYA44 XTe sound card. You may be pleasantly surprised by the many options offered. The Xte is a professional level sound card and there are many reviews on it.
  • blackmagnum - Monday, February 24, 2014 - link

    Listening to music on an onboard sound device is like playing a game using an onboard video card: while possible, it's not enjoyable.
  • baal80 - Monday, February 24, 2014 - link

    Really? I've been using onboard sound since my last Sound Blaster Pro and I really don't see the point in buying a discrete sound card (for casual gaming/using). To each his own, I guess!

Log in

Don't have an account? Sign up now